Amped to 25! Sonoff POWR3

No video

Amped to 25! Sonoff POWR3

Рет қаралды 26,220

Күн бұрын

INFO:
🆓📈
#ITEAD brings a new #Sonoff device, this time the current limit is cranked up to the max! See what other changes came with R3 series of Sonoff POW.
More on: notenoughtech....
Tasmota guide: notenoughtech....
Get yours:
Sonoff POWR3: shrsl.com/34090
Sonoff POWR2: shrsl.com/34094
2nd Channel: / @techovertime
SUPPORT ME:
www.notenought...
Thanks to my August2021 supporters:
Ron H, Philipp J,
Supported by Patreon:
Domingos C, Rasmus Engell H, Nis L, Ha-Dida, Herik A, Daniel G, Leroxy, Nodle, Marta H, Natasha W, Grigory, David G
Social media:
/ notenoughtech
/ notenoughtech
/ notenoughtech
/ not_enough_tech
BUSINESS ENQUIRIES:
notenoughtech....
Transparency Legend:
💳 - I paid for the item with my own money
🆓 - I was interested in the item, received free of charge
📈 - I used links that bring me affiliate payments
💵 - content commissioned, I retain 100% creative and critical control
💰 - ad/ sponsored content possibly vetted by the sponsor
More information: notenoughtech....
Music
Hip Jazz by Benjamin Tissot - www.bensound.com

Пікірлер: 59

@PeterHellmich 3 жыл бұрын

Flash, flash, flash!

@notenoughtech 3 жыл бұрын

(cue "Flash Gordon" theme music)

@pflorin9926 2 жыл бұрын

I wonder if i can hook up three of these for each of my three phases coming into my house. Great video!

@notenoughtech 2 жыл бұрын

I'll be posting maybe tonight about SPM which would be more suitable for your application

@chuxxsss 3 жыл бұрын

Good morning, just subscribed saw you on Peter's Website. I have.... 5000 Watt Glowatt but the load would need to be the house.

@notenoughtech 3 жыл бұрын

Morning ;) Pete is a good friend of mine! Thanks for the sub. 5000W would be pushing this to the limit ;) do tell how will it work for you

@chuxxsss 3 жыл бұрын

@@notenoughtech I have to put up the solar panels build the 14KW battery then connect to the house. I will probably not do it yet. Anyway have play with node red a long time ago now. Best get back into it.

@notenoughtech 3 жыл бұрын

Sounds like an interesting undertaking! Nodered for the win! :)

@deykartorrico9304 5 ай бұрын

Hello, I am looking for information about POWR3, I need to know if the relay can be automatically energized after turning off the equipment.

@ronm6585 3 жыл бұрын

Thanks 😊

@notenoughtech 3 жыл бұрын

My pleasure

@rodrigojds 3 жыл бұрын

The kWh rate, OPS and inching settings always been available In the App for the pow2 :)

@notenoughtech 3 жыл бұрын

You are right! Just looked up the POWR2 article and somehow I missed that. I think I'm getting old now

@user-wj7zp5te2z 10 ай бұрын

Great video! which cable do you suggest to connect this just after the main switch of a 3kW system (25A)? 10 cm of 4mm cables? better 6mm?

@notenoughtech 10 ай бұрын

Thicker cable will run cooler. If the cost isn't an issue and fits well into the terminal then go with a thicker

@namnta 2 жыл бұрын

can I use this smart switch with air-conditioning? Also, in the event of a sudden power outage and its return quickly, does the switch restart the air conditioner or protect it?

@notenoughtech 2 жыл бұрын

It has software implement protection is not as fast as hardware one but your appliance should be fine should this happen

@DontBelieveWesternMedia Жыл бұрын

Hi. How do I know if my Appliance is on or off considering mine is connected to my geyser..? Also considering the WiFi is out of data. What happens when I press the reset button? Does the sonoff switch off? How will I know as the lights on the device do not seem to give an indication

@notenoughtech Жыл бұрын

Without connection you won't have controls or feedback from the device.

@nemanjatrebjesanin764 Жыл бұрын

The main fuse on my grid is 25, can i use this to monitor all my house (1phase) Thanks.

@notenoughtech Жыл бұрын

The answer likely to be yes but it also depends on what load you are connecting. In reality your house is unlikely to draw anything close to 25A at the same time

@ibudeka2520 Жыл бұрын

Pow r3 vs elite version, which one better?

@nag1uk Жыл бұрын

Hi. I have a POWR3 running, Tazmota 12.3.1. I can get the Relay working fine. But I cannot calibrate the power and current measurements. Have you got these working? Thanks

@notenoughtech Жыл бұрын

Someone's mentioned similar issue. Re applying tasmota config fixed it

@zisissourlas1514 Жыл бұрын

Can I use this on my water heater? It isn't supposed to require more than 20A (the relay connected to it is a 20A one).

@notenoughtech Жыл бұрын

As long as your heating doesn't draw more current than specified for this Sonoff - you can

@gorgonbert 3 жыл бұрын

25A single phase? What’s the use-case for this thing?

@notenoughtech 3 жыл бұрын

Inductive current limit would be significantly lower than 25A depending on voltage. In this case you could drive much higher inductive loads than on standard sonoffs. Usually safe inductive load on 10A sonoffs is about 1-2A. While I have no information about certification for it we can safely assume that it would be around 5A (relays are rated for 30A inside)

@moodophile 3 жыл бұрын

Waterheater for those of us in countries with single phase supplies to our houses but no mains gas….

@notenoughtech 3 жыл бұрын

You could definitely run a whole heating system on that without worrying about sonoff being the weakest link (at least when it comes to current limit)

@RossReedstrom 3 жыл бұрын

Startup current/inrush is often much higher than steady-state: this can avoid frying your control device for those types of loads.

@semidemiurge 3 жыл бұрын

@@RossReedstrom how does this device act as a start capacitor limiting inrush current?

@rkwjunior2298 2 жыл бұрын

My device is paired but wont connect to the internet. Every thing in my house is connected to the internet but this wont. This is first start up. I cant find any info on the issues.

@notenoughtech 2 жыл бұрын

What do you mean by paired? Paired would indicate that the device is is present in the cloud and you have a control over it from the app - therefore it is connected to the internet. Could you explain this a bit better?

@rkwjunior2298 2 жыл бұрын

@@notenoughtech its paired but offline. Won't connect to the internet

@50sidu Жыл бұрын

What is the max sec in inching mode?

@notenoughtech Жыл бұрын

Honestly don't remember but I think it was 59min

@rodentcontrol4143 2 жыл бұрын

Can you set it to send 2000W to a 3000W geyser ?

@notenoughtech 2 жыл бұрын

It won't regulate the current. It can only cut off the power of current exceeds the set amount

@maxpavlov7700 Жыл бұрын

Diff works?

@notenoughtech Жыл бұрын

I'm sorry?

@ajaykrishnan9806 2 жыл бұрын

can I use it as a whole house energy monitor

@notenoughtech 2 жыл бұрын

Sonoff will have dedicated equipment coming up for that. This unit alone isnt good enough for the whole house

@3M4NU314CUN4M0R4 2 жыл бұрын

@@notenoughtech what about just a room?

@notenoughtech 2 жыл бұрын

Up to you as long as you stick to the current rating

@Forthebetterlifehere Жыл бұрын

Technically I can use it for whole house right. My average load is 500W, occasionally 2000W and rarely 4000W. It includes 1500W geyser, 1200W motor for watering. Rest all lights, Fan, TV etc. The dedicated device is costly. @NotEnoughTECH