AMS Red Alpha VR30 Intake Install Video

AMS Red Alpha VR30 Intake Install Video | Infiniti Q50/Q60

Рет қаралды 40,225

4 жыл бұрын

With everyone sheltering in place, now is the perfect time to install your INFINITI's Red Alpha Intakes. Watch as Dorian, an AMS Technician, shows you the quick and easy install of our INFINITI Red Alpha Cold Air Intake System. This video is the perfect compliment to our comprehensive online instructions you can find here... bit.ly/2Yknmq0 that take you through the install step by step. For this and more about the INFINITI Q50 and Q60 VR30 Red Alpha Intakes visit the link below.
Intake Product Page: www.amsperformance.com/cart/i...
AMS Snapback Hat: www.amsperformance.com/cart/b...
Dynasty T: www.amsperformance.com/cart/a...

Пікірлер: 52

@Banana69999 2 жыл бұрын

I bought these, how do I clean them?

@OldSchoolJules 3 жыл бұрын

Love this video. But man I’m salty that you make it look easy. My cars coupler rings were a PAIN to get off. One was even behind the coupler. However, it’s a very doable install and a great product.👍🏾

@macca7941 2 жыл бұрын

The background music is legit. 😂😂

@Dzazter Жыл бұрын

Wow, you skipped right over getting the coupler back on the turbo on the passenger's side. It's a total PITA to get it back on and even more so to tighten the clamp. Wanting to see how you did that was the whole reason i wanted to see this video. You didn't show jack for either part and made it seem like it went together in seconds. TRUST ME PEOPLE! IT'S A BIIIIIGGGGG PITA!

@aliviettry8985 5 ай бұрын

Took me about 15 minutes, yes PITA. What ended up working almost instantly was using a flat head to spread the silicone away from the coupler and letting air in on all sides. After that, it wiggled out pretty easily. If anyone else is still working on this in the future...

@anthonynguyen3466 4 жыл бұрын

Yes!!! More of this please

@AMSPerformance 4 жыл бұрын

You got it!

@torniketsaqadze8291 8 күн бұрын

can u told me size of filters ?

@noncitizens13 4 ай бұрын

are they 3” intake ?

@NARTHUR810 4 жыл бұрын

Can u guys do a video on installing the coolant expansion tank for the fender?

@AMSPerformance 4 жыл бұрын

That is a great suggestion. We will shoot it when the next one is installed.

@KA-xt3rn 4 жыл бұрын

@@AMSPerformance waiting for the video

@gilgomez3537 2 жыл бұрын

How do you get rid of the check engine?

@TheLawIX 2 жыл бұрын

If there is a check engine after install, you installed the MAF incorrectly.

@kevinvargas3391 4 жыл бұрын

Question,how come some say Infiniti on top of the airbox and some say Alpha?are they the same....also does this void your warranty??

@KA-xt3rn 4 жыл бұрын

it's same

@mattygee617 2 жыл бұрын

Do I need a tune after I install these?

@AMSPerformance 2 жыл бұрын

We do recommend a tune after installing. You can call us or contact a rep at sales@amsperformance.com for more info

@wizlb 2 жыл бұрын

How long does it take to install these intakes ?

@DanielFlores-cd6ub Жыл бұрын

around an hour, but us home mechanics know that that’s more like 3 hours lol

@DanielFlores-cd6ub Жыл бұрын

my 1 hour fun time turned into hell, i didn’t have a bendy extension and that passenger side coupler…. i wanted to die. I’ve given up, defeated, tired, sore hands, i shall try again tomorrow (i refuse to buy an extension)

@_armando._10 2 жыл бұрын

Can I add these on a 3.7 q50?

@AMSPerformance 2 жыл бұрын

Sorry but these do not fit the 3.7.

@AMSPerformance 2 жыл бұрын

@@AngeloB_91 We use the stock MAF housing to retain OEM drivability! We have never had an issue from any customers regarding this problem 👍

@wizlb 2 жыл бұрын

Will there be any horsepower gains without a tune? I live in a country where there isn’t any one that can tune your car. What is the benefit if I don’t get the car tuned and have these intake?

@ivanq9643 2 жыл бұрын

Not too much benefit in horsepower without a tune, the only benefit you’d get is the sound and even that is minimal with the hood closed. Have you looked into remote tuning? Racebox, sonictuned and a few others offer remote tuning, you might wanna check them out!

@wizlb 2 жыл бұрын

@@ivanq9643 Can they remote tune to another country

@ivanq9643 2 жыл бұрын

@@wizlb I was think so but it’s best to check with them to make sure

@tehKrunks 2 жыл бұрын

Holy shit that passenger claim tighten was impossible 🤦‍♂️

@davidrazo8698 2 жыл бұрын

Just ordered these should I get a tune?

@Adam-vs4iw 2 жыл бұрын

Never install any engine mods without a tune. You will fuck up your engine

@davidrazo8698 2 жыл бұрын

@@Adam-vs4iw I’m running on a Jb4 now

@lancenorthcutt4474 2 жыл бұрын

One of The main points of a tune is to get the most out of your bolt ons (intake,catback,turbo,etc), if you tune your engine first youll have to go back for a retune everytime you get a performance part put on. Its not gonna hurt your engine dude🤣

@lancenorthcutt4474 2 жыл бұрын

Dont listen to Adam. Install all your parts you want before a tune so the tuner can extract the max power out of said parts

@Adam-vs4iw 2 жыл бұрын

@@lancenorthcutt4474 haha. Yeah don't listen to Adam. Blow up your car. Haha.

@clarencewilliams61 4 жыл бұрын

need to make for 3.7 Q50 also

@Squillyyy Жыл бұрын

Lmk

@brianm4831 3 жыл бұрын

I may be missing something but I don't see how these would give you much gain for the money they cost (close to $500). The intake part ends up right back where they were sucking in hot air.

@ryen49 2 жыл бұрын

They aren't sucking in hot air like.most short air ram intakes because of how the air is fed into the stock oem ones the aftermarket ams retains that as well so they pull cold air from outside Also the turbo heat this air up and the intercooler cool it back down before the throttle body anyway so more focus should be on Upgraded heat exchanger tbh

@kalexpo336 10 ай бұрын

How about a cleaning vid

@AMSPerformance 10 ай бұрын

Simply use compressed air, 30-40 psi, from the inside out to clean the filters. For a deep cleaning from extreme environments, a biodegradable cleaner such as Simple Green or other mild shop degreasers can be used. Simply place the filter in a solution or spray the cleaner on the filter. Allow the solution to loosen the particulate and then rinse thoroughly. Shake the filter or use compressed air from the inside outward to remove residual water and allow a full day or two to dry.

@nikolasvenetidis9608 3 жыл бұрын

It’s like no where can I find what exact tools I need so stupid. The job is super easy my car is parked about half a mile away to walk to and from my house because nobody can say what socket sizes you need is dumb af

@andrewcampbell66 2 жыл бұрын

Can you tell me what other sockets are needed aside from 10mm? Looks like a 1/4 inch socket for the clamps, no?