An alternative way to carry your kayak

No video

An alternative way to carry your kayak

Рет қаралды 13,956

Күн бұрын

In this video I explain a quick and easy method for carrying your kayak: simpler than a kayak backpack, but much better than just putting the boat on your shoulder.

Пікірлер: 23

@Tasselfish 2 жыл бұрын

Wow, I like that a lot! Quick to assemble, and uses something every kayaker already has

@palmequipment 2 жыл бұрын

Going to give this one a try!

@mrsam225 2 жыл бұрын

ur videos are very good. short snappy and straight to the point. very nice rob

@JamTagg 2 жыл бұрын

Hi Robin, great idea! I just tried this (and about a half-dozen variations) with my Nomad. It doesn't quite work for this boat because the only spot to get the strap behind the front pillar is way down at the bottom of the hull, making the straps pull my shoulder back pretty far into the cockpit when carrying, which puts a lot of stress on the back of my head and neck. Your method did inspire a good final solution however, and ended up being even more simple. I just put a carabiner on the aluminum foot-brace stay, just in front of the adjustable nut and attach a loop of webbing (both ends) to the carabiner. Takes literally about 2 seconds to clip it on and you are on your way, no feeding through anything necessary, and at least for my body dimensions, the webbing ends up being just about the ideal length to also double as my emergency tow-tether which can be used for other rescue rigging. Also, if you have a long hike, or a situation where you need to switch shoulders on an approach, again it only takes about 2 seconds to unclip from one brace stay to the other. Thanks for your inspiration!

@robinscott8936 2 жыл бұрын

Hi Jamie, I'm delighted that my video helped. Yes, I'm sure there are hundreds of variations on this theme. One simple version I tried was just a 2 metre strap around the central pillar. I'm sure the optimum design depends on the model of boat and dimensions of the paddler.

@warrenrosenthal716 Ай бұрын

You can put a quick disconnect in the strap so it can be disconnected quickly.

@davehumpleby3440 2 жыл бұрын

Nice idea. Will try this. Thanks for sharing.

@johnliungman1333 2 жыл бұрын

Nice, simple solution. Often the best! 🙏

@stevehalstead8935 Жыл бұрын

Thanks ,works fine with 3m cam buckle strap, which can be adjusted to get the loop length right by tightening the cam buckle

@Nooxeer 2 жыл бұрын

Very interesting. Definitely worth giving a try

@AtlantisIndigo Жыл бұрын

Wow. Great idea!! Thanks

@georgheld4130 2 жыл бұрын

Hey Robin, this looks great. Could you please share the measurements of the strap you are using. Are you using different straps for different boats?

@robinscott8936 2 жыл бұрын

I think it was a 3m strap, but I’ll check. I’ve only tried this method with my creekboat.

@robinscott8936 2 жыл бұрын

Yes, I used a 3m strap. You could probably use a 2m strap if you just go round the central pillar and don’t clip onto an attachment point on the stern as I did. Just make sure that the strap is thick so it spreads the load.