I was at a race last Friday and had a world of issues on R5 of analog module (TBS fusion on batch 2). Going to hold on to my Orqa's until this gets squared away. Looking forward to trying the new beta firmware. Thanks again to those working to iron this out. 🤙🤙🤙

WOW - This is exciting! I moved onto HDZero only, but hearing this makes me want to fly my analog quads again!

I got HDZero to fly HDZero. The Feature set at time of Pre-Ordering begenning of Jan (Not going to lie, that 100$ off sealed the deal for me) and ability to fly analog (Not the main reason though). I started with Analog last year, so this helps a lot with transition as I slowly move my fleet over to HDZero (and donate my Analog quads to a freind startign out). I still enjoy Analog, it has that cuberpunk look and feel. Knowing Carl made the Analog chipset everyone has been using all this time, and now HDZero. This is all great news! Thanks to all of you for your continued effort to improve the goggles in all that they do, including old Analog technology. Cheers!

Thanks for so much effort to fix analog! 🙏

I'm still on factory firmware (v9.0.1). I'v been comparing my analog module (URUAV EVO) using the hdzero bay against an old skyzone bay that plugs into AVin. In my few tests it was virtually the same for both. But the stability you show in this video is quite an archievement. Also kudos for posting the beta in the description. Bravo!

Great results! I'm not usually one for beta firmwares, but I may pop this on for my race this weekend as I only have one HDZero build in one piece 😂😂

The last video does look great for analogue. Cheers.

Great explanation and demonstration video. The side by side comparison clip really helped me understand what was going on. 👍🤓

Great video! Thank you for putting so much energy into fixing the analog issues. I will test this as soon as I can! ^^

Brilliant information..... Looking forward to trying this!

Great job to Carl! Thanks for update Ryan 👏

Great video once again. Thank you.

Awesome, analog firmware is looking very promising

Looking forward to trying this out. Analog has been bordering on unusable with a Fusion in the module bay with the Shuddering and PAL/NTSC fussiness. More HDZero builds coming too!

Thank you Ryan

Thank you very much Moblite6 on steroids back to the business 😀 😂👍

I have batch 1 goggles I received in the first week of January. I updated fw as soon as I got them, and havent updated since, aas Im about 80% analog and 20% HDZero, and Ive had a fear of Analog performance getting worse. I would really like to check out the fixes with hdmi in, as well as 1080p mode but couldnt risk analog performance getting worse, as Im happy with how it works now. I actually started out with a Wildfire module that would roll, and ended up buying a fusion module to try and make it better. I might finally give the new fw a try.

Yes! Thnx! 👍

very nice, I am on 8.xx and Fusion already never rolls

0:31 I started getting a lot of rolling on my analog goggles recently on Rapid Fire mode 1 for some reason. I didn't get it this bad previously.... And I didn't change anything about my setup. I'm going to go a RapidFire update and see if it's any better.

Ho fatto un ordine 2 mesi fa quando spedisco

this one the same with Rev 26062023? hdzero new update?

Top hdzero ordinati sono piu di un mese ancora devono spedire 😢😢😢

Is it my speakers ...... or his mic ?

What firmware version are you using on your Fusion Module in the video?

I’m going to test this FW with my ClearView 2.0 ground station. What antennas were you using on the RapidFire / Fusion and on the whoop?

the .27 beta firmware is way better even on a Steadyview

Hello Ryan, sorry for inisisting but i cant find information anywhere. This firmware is only for Analog? or it enable 540@60 fps for hdzero aswell? About flashing... i only see one file dont need to flash the vtx? thank you in advance

No improvement on my batch 2 goggles. In the lower portion of the screen there's really bad image (black and white, static) that's not present on 9.0.1 firmware.

Just ran this update in the goggles and now I cant get past the loading screen, screens go blank and there is a clicking in the goggles every 2 sec. Is there a recovery procedure?

On mine, using RF on mode 2 and R8, the image would lock and flash for a second or so. It's really sketchy... That's on a whoop at 200mW.

ANALOG IS BAAAAD FOR TJE LOVE OF GOD FIX THISSSSSSS

Hello, I know it has nothing to do with the subject but the indication of the fans on my goggles disappeared. How can I get back to this indicator? Another question now related with the beta firmware, just need to flash the goggles? dont need to flash my freestyle vtx i just see one file in the download section. Can i use 540p@6o fps with this firmware? Thank you in advance

Can you output video through the HDMI out while using the analogue module?

can i use this beta in bach 2?

I did similiar test few days ago, but we Didn’t go with poor signal so far. With quite good signal I didnt experience image rolls on my HDZ goggles with 9.0.1 FW and Fusion V2.30 kzfaq.info/get/bejne/baxhe9SGtJOqZnU.html

😢

Looking forward to it when my v2 module arrives and I'll need to update. Thanks for all the effort to resolve analog concerns to all the testers and Carl. Ze goggels. They do EVERYTHING.