ANDIS MASTER SERIES - The Adjustment Screw

Рет қаралды 19,829

5 жыл бұрын

We are ending the series and saved the best for last!
So stick around and let's watch Brandon tell us all about the adjustment screw and how this adjustment can greatly improve the functionality of your Andis Master!
We hope you all enjoy the video.
We encourage you to ask questions in the comments below!
Don't forget to subscribe so you will stay up to date on our future videos and hit the notification button so you never miss out!
As always thank you for supporting our channel. We hope it brings you some value.
The Edge Pro Team.
Follow us on all our channels!
Website: www.theedgepro.com/
Facebook: / theedgepro
Instagram: / the_edge_pro
Twitter: / the_edge_pro

Пікірлер: 23

@M0E0810 4 жыл бұрын

Thank you very much for posting this video!

@marcdavis1927 3 жыл бұрын

Good to know, Thanks!

@anthonyvalles3121 3 жыл бұрын

You are so awesome bro, thank u so much

@khemestre 3 жыл бұрын

Good info. I have the Master And BGRC'S-. Its been a couple of years since I've used andis

@masatsunekon6168 3 жыл бұрын

Hi! Thx for the informative video. BTW where did you get those fork connector screws? They don't seem to be original. I live in Europe and replacement parts are hard to get. If you can provide the specification that would be highly appreciated. Many thx in advance.

@calilifetv9857 3 ай бұрын

My andis masters make a lot of noise why? What do I need to do ?

@demonslayer9016 Жыл бұрын

Thanks for the vid, I see you did this helpful video a while ago but figured I'd ask anyways as I am pretty clueless. I am having problems with a new fademaster, that black fork in the clipper is flush right and not centered at all and it totally throwing the lower blade off and its even hard to get the blade clipped in at all. I cant get the top and lower blades to line up. Can you give any advice on how to move the black fork towards the middle ? Thanks in advance, cheers.

@TheEdgePro Жыл бұрын

All of the corded master models are the electromagnetic motors. The neural position of the motor is designed for the left tooth on the cutter to align with the inside edge of the left large tooth on the comb. The magnetic motor will pull the cutter to the right and a spring return will bounce past the edge of the large tooth on the left. When adjusting the position of the mounting fork, first clean and oil the blade followed by correct adjustment of the power screw. Then center the comb in the blade mounting screws, making sure the comb is straight with the clipper. Remove the cover from the clipper. The fork has two mounting screws securing it to the arm. Currently these are T-20 torx fasteners. Loosen the two fasteners and move the fork and cutter to the correct position and tighten the screw back down. Turn on the clipper briefly then double check you lol Ike the resting position of the cutter. If it needs more adjustment make the changes until you are happy with it.

@TheRealKruzix Жыл бұрын

I can’t seem to get my blade flush with the left of the guard

@WaveyG Жыл бұрын

Maaaaaan thank god 🤣🤣🤣🤣🤣

@Fella48 2 жыл бұрын

Mine keeps sliding to the right on its own smh it won’t stay where I need it too, but if I tighten or loose my he screw I’m either getting the rattling noise or theres like no power. I’ve been a barber for too long lol I know how my clippers should feel, power/voltage wise. This is frustrating

@TheEdgePro 2 жыл бұрын

Hi! You need to take the entire screw out, get medium Loctite (typically blue), and put that on the threads of the screw. Let it set, then reinstall and adjust the screw. It sounds like the factory Loctite has crumbled off the threads of your screw, allowing it to move with the vibrations of the machine which is why it won't maintain your adjustments. Hope that helps! :)

@Fella48 2 жыл бұрын

@@TheEdgePro that’s exactly why it’s moving, the vibrations.. will it mess up the alignment of anything by taking the screw all the way out?

@TheEdgePro 2 жыл бұрын

@@Fella48 As long as you don't turn it on while the screw is out, the only thing you should need to adjust is this screw when you are putting it back in. Thanks!

@1tymeproductions835 4 жыл бұрын

Maybe I didn’t catch it but what is the screw underneath the adjustment screw?

@TheEdgePro 4 жыл бұрын

It is a stabilizing screw. to help keep the vibrating rhythm moving toward the blade to maximize stroke. The best practice is to leave it alone at the factory setting.