This is exactly what I did and it didn't work. I get "no signal" message.

The only video that showed exactly what to do. Perfect. Thanks guy

I bought a aftermarket camera and i thought It wasn't working,this video saved me to pay for someone to set my camera up thanks a lot!

Great video...well detailed. Thank you

Thank you for explaining the setting of HD or no signal

tnx to this video i have install my reverse cam correctly

I just bought aftermarket Multimedia for Kia Sportage 2012 (all cables and camera came with the box) and I was wondering if canbus decoder is needed for me to install back up camera and for wheel commands to work?

Thank you sir... Your video help me a lot...

Grate video realy good explained .

Hi bro, is there any way to install reverse camera without peeling off the back light cable for power, my car is under warranty so looking for some plug and play reverse camera with Android or IRVM.

Nobre, essas centrais que trabalham com plug de 4 pinos internos, aqueles fininhos. Eles servem pra adaptar na central de camera Panoramic Driving Auxiliare 360°, onde os plug são RCA iguais a esses aí? Consigo adaptar, visto que nesse central de camera tem 4 saídas rca fêmea e um fio vermelho pra alimentação 12v, e no chicote com conector postmaster de 4 vias, será que dar certo, ou também tem um detalhe na instalação? Qual ? Esse chicote de 4 pinos foi de uma central android e eu quero fazer instalação nessa 360 numa First option MP5. Na verdade, já tentei várias vezes aqui e não deu certo, acho que até as câmeras da outra central android trabalha com 3v ou algo do tipo, acho que tem algum detalhe que não está batendo, e se trabalhar com 3v, lascou tudo, pq apliquei os 12v como nas outras centrais.

Just finished installing the rear camera on my Prado... Well... This is NOT about wiring... This is about disassembling the whole car from the dashboard to the back door... Took me the whole day. And the steps above took me only 10 minutes thereof... Thanks to Toyota - they use a good plastic parts! Only a few broke while this operation. Don't be fooled: this is NOT an electrical job. This is about finding out how to correctly disassemble all the trims and not to break too many of the holding clips. Good luck!

Hi can we also install a parking radar on these android radio ?

Hi , how do i give input for 2 camera ie one in the front and one in the reverse and want to see them together in a split screen

You are awesome!!!!

Hello brother really need you help I have a bmw f20 with android head unit I have three wires with the head unit CCD+12v, BACK & ACC which one do I connect the red wire with yellow av too and do I need to connect power wire yellow red wire to reverse light for it to work. My cars a manual if that changes anything.

Followed the installation guide exactly, but when I put the car in reverse I don't get an image. I can use the HD2 Streaming app and the camera works but has no tracking lines. Any help would be appreciated.

how do you take the backup camera wire and get it to the camera from the radio without it poking out the front ?

I was trying to get through the rubber and I damaged the end of the cable. I decided to cut and run the wire because it was thinner, now I bought a new P2 power cable. Can I just cut it too and splice it to my old one? I saw that there are 3 wires.

I want an Android dashcam, but I already have an aftermarket rearview camera on my car, connected to a monitor on my dash. The seller of the dashcam says my camera will not work on the Android dashcam. I find that hard to believe. The only difference is that the AV-in on the dashcams they sell is a jack or a round 4 pin plug. I bet an adapter cable from RCA does the trick?

I have a question sir.. it is color coding from wires from car and harnes from android head unit? I confuse bcoz its my first time to install on my own.. Thanks..

How do I wire/hookup the vehicles stock camera to the radio? I don't want to use the external one.

Thank for Sharing ❤🎉

I bought a CarPlay with the same wiring, but the screen dose not have trigger wire I just connect the yellow one to another yellow wire and the end of the other wire it’s like aux cable I but in the screen, and even I though I did the connection to the tail light I still can’t get a clear image on the screen it’s still so unclear

If wires on my radio not labeled what color wire for back up camera brown pink or what I can't get my camera working

Thank u so much dear

My camera wont go past the red and yellow color menus. What do I do?

Please help me with the connection of parking sensors with after market android

2 power + wire to tail light + (Red one) 1 power - wire to car body (GND) or tail light - (Black one) is it right?

Brother.. I have an In driving when i put left indicator my android panel show reverse option error and android restart. Further reverse camera connections are located next to the left indicator light.

My 9 inchs sldisplay exactly same what ubhave does not come with the trigger red clip?! 😕

Hi What of model is this lcd please?

Hi, I like to wire back up reverse camera when I put reverse gear. But I don’t know how to connect the trigger wire from monitor

Hi i have a Elantra 2015 and i have camera but there is nothing showing one’s i change to reverse help me

Ty bro!!!

Can this cable had a name of parking sensor control wire?

how did you do it can you share with me , thank you

This mean your camera is always on, when you ignition on car?

Thank you 😊

Hello. I am interested in how the layout of the wires for the camera goes as in the picture because my cores are torn. The output of the camera has 5 wires (red, black, white, green, yellow). How to connect them, make a red and yellow connector? Thanks

1;36 My saying in red texts "small lights off do not operate" ? ...My aftermarket radio and aftermarket camera not working

Any information about where can I buy it

Hi i install the camera and didn't show me pictures with collor just with black why

How do I get the guidelines to come up ?

Thanks, hi have u got any idea where can I buy Android console casing for Nissan Murano 2003? thanks in advance 😊

Good video

Hi. I installed the stereo and the camera but the picture is upside down. I can't find how to straighten the image on the monitor. Is there a way to put the picture the right way y up, without moving the actual camera?

My frind what is the best camera work with coogo android screen

How you connect the android power unit without a car? Do you use some adapter or battery? Please help

Wait, so that means the reversing light is the trigger for head unit to switch & display camera image?

Thank you

after installing the rear camera then will install the front camera, so how to display it on the screen if the android doesn't have the camera menu?

When I put my car in reverse the image doesn’t automatically show up I have to press the camera button idk how to fix it

I did everything correct but problem is when i put reverse camera starts but in other modes my screen stops all other functions

Nu găsesc firul de beak de unde lai luat

i have a 2014 corolla with the same Android radio but it has a factory backup camera, where do i have to connect the brown wire?

Hi do I have to connect the yellow wire from the input reversing video?

What if reverse camera is going on but nothing is happeing in the display the display is just normal not showing anything to do with reverse camera

Superb

the triger is the same of key 1 and 2, only have this connector on my screen

Where to buy now

I want the codes to upgrade to the screen because the radio icon that I can find does not work,There is no link to send me thank you.

Hello I have à câble acc and pc camera and other reverse How connect this three cables To radio gps android and camera Thinks

Can you explain the wiring with SWC for android tablet ?

Thanks pro

Bonjour,j'ai branché ma caméra sauf que l'image n'est pas stable

how many camera v

Amigo quiero instalar el mio es honda acord 2009 explica me como es

QUESTIONS: I have an '09 Corolla and installing 9" head unit. 1) Must the brake wire be connected to the black ground wire to by-pass emergency brake to watch videos while driving? 2) To have a camera icon on head unit and to see behind the car without being in reverse, did you connect the reverse trigger wire from RCA cable from rear camera to red Accessory wire and also the head unit reverse wire (mine is a brown wire) for when car is put in reverse? 3) I have two yellow RCA connectors from head unit. One connector is labeled 'CCD AVIN' and the other connector is labeled 'Aux-V'. The Camera RCA cable connector coming from the camera plugs into which of the two RCA connectors in order to establish a signal for the rear camera? 4) I have a pink wire from the head unit labeled, 'With protocol model output 12V can be connected to the camera'. Is this pink wire like an accessory wire for the rear camera to view behind the car with out being in reverse? Should I use this wire instead of the red accessory wire to have a camera icon on head unit and see behind the car without being in reverse? 5) I connected the RCA cables together at the head unit and the trigger wire to the red wire off of the RCA cable, but I get no reverse camera picture on the head unit. When I go to the rear camera, the LED lights up when in reverse. Why no reverse camera picture on head unit? Thank You for All Your HELP!!!

What if I don't connect the black wire from the power cable to the car body or tail light negative ?

grate videó. thx.

Nothing comes up on the settings like it does on this only shows first menu and that's it with blank screen says something about lights off /on

I have trued to connect the reverse camera on panasonic cn-h500d but it doesn't work I need your help

In toyota rav4 not working why

No signal and I’ve got power and all connections hooked up correctly. I can’t get into Factory setting because the 8888 and 1234 passcodes don’t work. Any ideas?

The camera is not stable in video what will b issues

Hello Guys! Pls can u explain to me why my AHD Camera do not work? i tryied many times but it doesn't work! pleeeeeeeeease

Is this compadible for the corolla 2010 model?

I have an after Market Android and when I put it in reverse it go's black and then no signal but the LED light on the camera comes on

What are the 2 small blue wires at harness of camera video, input plug on radio??

Is the pink wire “BACK” or is it “Key 1” or is the brown wire “BACK”?

The red lil wire from rca cable is trigger and shold not be connected

How do you get to those cords. Skipped a huge part

Same wire acc connection sir bsckcam and frontcam

I have a 2010 Toyota Corolla. Connected it exactly as you said, checked it 100x and the camera doesn't work. The "back" wire is the pink one for me but nothing. The odd thing is on the chart it shows to be the 3rd wire from right which it is but lists as brown, but mine is pink so I'm sure I have the right one. I put the car in reverse and nothing changes on the screen. What's wrong? Any help?

Where are the guide lines? This camera not showing any.

Hello my Camera no Signal what can i do

how to on the trajectory line.. and adjust a line angle and width

Thank you. Can you explain process of wireless camera

I'm in trouble with aftermarket Android radio in my 2019 Tacoma.

I don't have the Night vision camera but the only image setting that works for me is NTSC.........Is that normal?

Hello, I have a problem with the rear camera of my car, when I go back, there is no picture, and when I turn off the engine and just open the car key without starting the engine, it works properly.

So you don't need to connect to taillight?

I dont have reverse cable :/

I have a problem with mine the image only comes on the the is not started and when I turn it try to use it while driving in reverse it just say no signal can anyone help me?

Thank you, I was getting pissed off at the android unit

I put reverse but the screen doesnt turn to see the reverse CAM… what can I do???

My reverse camera is showing wrong. Left side showing right side in screen and right side showing in left side of screen,, Anybody can help me to adjust this..?

cant get mine to work followed these steps, nothing comes up when in R

how to fix back camera no signal