Andys' DIY Spark Plug Change on Triumph Daytona 2006-2008

No video

Andys' DIY Spark Plug Change on Triumph Daytona 2006-2008

Рет қаралды 19,853

Andrew Lewis

Күн бұрын

2006-2008 Triumph Daytona 675 spark plug change.

Пікірлер: 12

@dsd-downshiftdave8056 4 жыл бұрын

Thanks so much for this great video, just did my sparkplugs- easier then I thought- gonna watch your vid on doing the jets

@madonion2370 5 жыл бұрын

thank you for the videos. Today i removed my injectors and cleaned them thinking this maybe the cause of my 675 misfiring. I believe my problem is with a coil but its still good iv cleaned my injectors and ruled them out as the problem.

@tanguymurat6327 26 күн бұрын

Heyy, I know it’s been a while but what was the cause of the misfiring? I’ve got that and it’s a mess :)

@zachmarkham84 6 жыл бұрын

When would you try to see if you're getting spark to the plug?

@andrewlewis7025 6 жыл бұрын

Depends how the motorcycle was/is running. If it wont run, definitely check to see if its getting spark first. "mrmaxstorey" has several videos that explain and diagnose spark issues with motorcycles. If its getting spark, then you will need to move through the fuel system. There are several videos on "Andy's DIY" that adresses this issue. Good Luck..

@zachmarkham84 6 жыл бұрын

Andrew Lewis well, it isnt running. I suspect it may be the cps.

@andrewlewis7025 6 жыл бұрын

This is gonna sound stupid, but make sure any of the kill/safety switches haven't been engaged. My triumph had a tip over switch that mounted to the base of the speedo set up. Also, don't forget the kickstand switch. If you are getting spark, that should rule the kill switches out. If not, check both. Frustrating. Good Luck.

@zachmarkham84 6 жыл бұрын

Andrew Lewis thank you!

@massconfussion62 6 жыл бұрын

That little tit that causes issues all you gotta do is push gently down on the little board its mounted to it will separate from pump body lift the small board out the pull pump rest of the way out install reverse