I know this is a very late post (four years), but I just had an ocular migraine for the first time twice in two weeks. It scared me like crazy as I lost vision in one eye for about 20 minutes (tunnel vision). Glad to see that you have still been building and posting these videos for us--incredibly helpful. I also look forward to making another order from your shop. You are so helpful in your tech support. D. Cox
@cx32644 жыл бұрын
The moment of how excited Andy is when holding a panther kit is exactly the modelers’ happiness at finest
@johnburdis53526 жыл бұрын
Watching you helps me to plan my Panther A. Thanks 4 pointing out some of the mistakes I might make with my build.
@markallinson49356 жыл бұрын
Love what you are doing with this one. As soon as I saw it I thought "factory" so looking forward to your diorama! As to the interior light. Why hide it? Build a factory working light, you know long cable, wire cage round the bulb, clamp to attach it to things etc and drape the wire over the tank and into the hull. I'm sure they would have had several of them over each tank as they worked inside to build it up. Just a thought
@fredpurdy6 жыл бұрын
Takom are now my preferred manufacturer of German armour, well designed and detailed models, your videos are eagerly viewed and very helpful Andy, thanks a lot, great piece of work sir
@forbeshutton54876 жыл бұрын
The diorama sounds good, but if you added a gantry with the turret being hoisted into place, that would be great.
@matthayward78896 жыл бұрын
Forbes Hutton ⬆️ this is a *great* idea!
@sjeeke46716 жыл бұрын
I think this would be a better idea
@robertwallace49286 жыл бұрын
That’s a great idea! Let’s see what Andy comes up with.
I really like the diorama idea. 👍👍 Always a joy to watch you work. Can’t wait for part two!
@dominoin11235 жыл бұрын
Hi everyone. I doing exactly same model but I find more problems during my building. Everybody which decide to built this kit need to follow instruction step by step with no matter what, so than after will be less pain and stress as I was have. The model looks great but is no easy and only one think I don't like for the price which you need to pay I will expect the clear plastic parts for periscopes. I hope my comments will be helpful . King Regards Andy for doing this film and all model fans.
@roberthawkins57856 жыл бұрын
Absolutely stunning idea with the diorama.
@matthayward78896 жыл бұрын
Love these full interior kits!
@jerryvolpini79876 жыл бұрын
Ahhhhhh.............did I hear diorama? Can't wait!!! Build is looking really good so far, another amazing Panther kit with a LOT of parts! Those instructions look amazing but no text? Bring on Part 2!
@reconranger13706 жыл бұрын
Hey Andy, looking forward to seeing the finished product. The one you recently built came out great! A diorama of a Panther factory is a great idea. Thanks and I'll see you this weekend! Joe
@IamBlackdragon6 жыл бұрын
Doing the factory scene Dio is a great idea to show off the interior of the tank. Really like the idea of the light in the tank. Great Inspiration again, Thanks
@DasPoop20126 жыл бұрын
I love your videos, wish we had guys like you in my local hobby town
@thor86406 жыл бұрын
GREAT Idea, Andy!!! Brilliant, why didn't I think of that. Looking forward to my Panther book, hope they ship soon.
@egomezmx656 жыл бұрын
Awesome idea of that diorama! I'm looking forward for that! keep up the great work Andy!!! and Safety first, rest the eyes :)
@johnburdis53526 жыл бұрын
The factory layout diaroma for the Panther A is great way to display the tank. I can't wait to see the out come of the diarama, good idea Andy.
@geraldshultz42716 жыл бұрын
Brilliant idea...I cant wait ti see it especially the mirror effect.
@dinomigliore6614 жыл бұрын
Excellent choice in classical music by the way.
@MrRon69776 жыл бұрын
I like the diorama and light ideas i think it would make the interior of the tank really stand out.
@Sourdo16 жыл бұрын
I see the Machine is making a part in the background! Yay!
@psadorski6 жыл бұрын
Great idea Andy with the Panther factory:) looking forward to see how it will look at the end :)
@rottingflesh76 жыл бұрын
Diorama - it's a great idea ! I'm waiting for more 👍
@maximus12396 жыл бұрын
Wonderfull idea andy cant wait for your next video. thumbs up
@pinfarmer6 жыл бұрын
You’re a machine. Took me forever to do the first. Amazing idea for a diorama btw. I think I mentioned that idea in a comment at one time. A overhead crane would be cool as well trying to shoehorn the transmission into the front opening.
@captainflack6 жыл бұрын
A gantry crane lowering the assembled turret into place would look good.
@mladtheimpaler6 жыл бұрын
I'm excited for the diorama!
@stuartancell12796 жыл бұрын
Hi there the new tankom kit look's first-class
@TheSaturnV6 жыл бұрын
Book preordered! Thanks for your part in this Andy.
@richardbreisch80496 жыл бұрын
man you build a really cool presentation. Hats off to you!
@spaceosis89776 жыл бұрын
That's a splendid idea, Andy! A factory diorama, haha. So Cool!
@adamk46626 жыл бұрын
Great idea for a diorama, this build will be fantastic! The LED "work light" will be a great addition, will be difficult to get the right scale for the light though.
@pzrgren26086 жыл бұрын
Genius idea for the mirrors in the diorama!
@andrewshaw83966 жыл бұрын
Great diorama idea. Looking forward to this!
@June1815VICTORY6 жыл бұрын
That`s a very impressive kit, Nice work Andy
@gjce16 жыл бұрын
Really liking the diorama idea!
@danmeehan13903 жыл бұрын
Sheppard Paine did a diorama using mirrors for, as I recall, a B-29
@claytonmcclain1826 жыл бұрын
Nice save.
@baguettewithcheese38806 жыл бұрын
This diorama is going to be awesome
@VegasCyclingFreak6 жыл бұрын
10:09 Yeah... I was thinking wait a minute, where's the torsion bars? ha ha
@CC-dq6ck6 жыл бұрын
Again,making me buy more models Oh Andy...
@ChrisMorgan-hr4gv6 жыл бұрын
if you can find a small light with a thin cable ,just run it to the wall factorys would have had light all over ,so as long as it look in scale you would not have to hide it or drill any holes
@krakke31886 жыл бұрын
Great vid, always loved the Panther. About the lights, since the workers would need lights too, if you can find thin wires, you could just run them out of the tank and even make the lamps visible. I think a lot of wires and stuff running out of the tank would really ad life to the piece.
@dfens6666 жыл бұрын
Damn you, Andy! I just ordered the book- you are costing my $$$! Great idea on the mirrors- it will be exciting to see what you come up with.
@Ll-cn3zj6 жыл бұрын
Inspire kit! Waiting for part 2...
@wyspiarzemodelarze20516 жыл бұрын
Waiting for the diorama! Another great video :)
@bulletheed19706 жыл бұрын
Andy the part you called gearing is the braking system . really looking forward to this being built and the base.
@silverdragontm95486 жыл бұрын
The diorame is an great idea. Did You think about to build a little crane with your 3D printer for the turret? Because thats how the whole turret and other heavy parts were put in the vehicle.
@garettwheeler29876 жыл бұрын
You should put two way mirros so you can look at it from the side but still get the effect of the mirror
@ozzyo72876 жыл бұрын
nice dune andy very learnfull keep on the good work
@fredpurdy6 жыл бұрын
Really nice model from Takom, your doing a good job Andy, diorama sounds interesting, greetings from the south east of England
@finnh77026 жыл бұрын
That’s a sick diorama idea!
@stevejones90446 жыл бұрын
Whoa! I had an ocular migraine last year for the first time too. In my case I saw in my left eye a low frequency "Z" pattern that kept growing slowly. It looked like marching ants you see in selection boxes in Photoshop. I had retinal surgery in my right eye early last year so I thought I was losing my "good" eye too!
@dakel206 жыл бұрын
You can get some insanely tiny 1mm LEDs with pre soldered leads on them, that are basically hairs that you can hide under paint. Looks fantastic so far, and I'm curious what you're printing back there!
@BillyTubememe6 жыл бұрын
I really look forward to this kit. I looked up the price and it is actually cheaper than other kits! Of course its a pre-order. P.S. Panther A did not always have zimmerrit on them. Ex. Panther in Munster museum.
@TheFlatlander4406 жыл бұрын
Nice looking build there Andy and I def want to purchase this kit over the Rye Field one as it appears to be a bit easier with less PE. Thanks for sharing.
@migeater65776 жыл бұрын
With the amount of Panther kits you are building a "Panther Factory" diorama seems rather appropriate :P
@VonRammsteyn6 жыл бұрын
OMG ANDY! Look back! One of your books is mooving by it self! U have ghosts in your store! Besides that... Did i saw a real panther chain while you were showing the model? And besides that, is very nice of you not eliminate your mistakes from the video so that way others don't make it as well. Allways a pleasure checking out your videos! Saludos!
@milky55way20126 жыл бұрын
Why not just have an external work light hanging on the hull with workers around it? You could run the cable to an electrical outlet on the factory wall. Beautiful model....
@JA171456 жыл бұрын
Tamiya panzer 2!!! Next to build please..
@daviemaclean616 жыл бұрын
Great idea for the factory diorama to show off the interior. I am sure you have a far greater knowledge of kit availability, but I remember Italieri used to do a kit of (admittedly) field tools which included gas bottles, a hoist, etc. Cheers
@scottanderson1396 жыл бұрын
Hey, Andy. I enjoy your videos a lot. I have a book from 1988 by Hal Sanford, "The Illustrated Modelaholic". Hal uses photos and written descriptions of projects he has done. Somewhat crude by today's standards, it is still inspiring to look through.One of the projects in the book is a Tamiya Panther, partially disassembled in a "Feldwerkstatt", a rear echelon heavy repair station. The turret is suspended above a Panther by a 15 ton field crane. I bring it up as a variation of your factory idea, which incidentally is another featured diorama in the same book. A Tiger under construction, but worthwhile to look at for ideas for your Panther setting. I see some copies for sale from Amazon, (cheap), if you don't have one; worth a look.
@Boeing7346 жыл бұрын
I like your Idea!!!!!!!!!!!!!!!!!
@hungryhank60446 жыл бұрын
Hello Andy! Great video as always. The diorama of a factory setting is cool idea.Would be kinda neat to have 1/35 scaled factory workers around the vehicle for size comparison. Take care.
@jamesbednar86256 жыл бұрын
Great video. So far, looks like the TAKOM kit may be just a bit better than the Ryefield. However, ALL the kits you have reviewed/worked on thus far have their own merits. Anyway, I am currently working on the Cyber Hobby "Panther F".
@Spitsz016 жыл бұрын
I agree with Forbes, I have some pictures of that! thx Andy, great vid!
@stuartancell12796 жыл бұрын
Hi there the tamiya field workshop kit has a over head gantry plus lot's of other bits that might be ok
@graemebrumfitt66683 жыл бұрын
Hi Andy, I have the Fries Kran with a late D and was thinking about getting the Takom BergePanther and doing a dio with three of them as a field unit repair depot kinda thing (don't know if there was such a thing but I like the idea) Will probably nick a few of your ideas along the way. TFS, G :)
@o.b.72176 жыл бұрын
Suggestion: Build a "Strabokran", to lift the turret. You can set it before the actual tank, because it has wheels. That way you can make it look, as if the turret is soon to be moved over and assembled to the hull. Quote: _The Strabokran was a transportable street gantry crane used by the Wehrmacht tank repair units in World War II_ _The company J. S. Fries son in Frankfurt developed the strabokran before the beginning of the war. There were three variants_ _which differed by payloads of 15 to 16 tonnes and different years of construction. Until the end of world war II, about 100_ _pieces were built, partly under license from the company Stratenwerth in Duisburg. Half-chain tractors_ (Sd.Kfz. 8 or Sd.Kfz. 9) _pulled the strabokran in the field. To build a Strabokran, ten soldiers needed about an hour_ *Only workshop companies of units equipped with Panthers or Tigers had them* " upload.wikimedia.org/wikipedia/commons/c/c1/Bundesarchiv_Bild_101I-244-2323-28A%2C_Ostfront-S%C3%BCd%2C_Reparatur_von_Panzer_V_%28Panther%29.jpg [ *Panther with Strabokran* ] weapons-of-war.ru/_ph/35/292199168.jpg [ *Strabo with turret lifted off of hull* ]
@40intrepid6 жыл бұрын
Nice to see a tank kit that isnt just a "curbside". Wonder if they would do a Sherman with the five bank, thirty cylinder Chrysler engine?
@vladlipovsky29154 жыл бұрын
A number of early production ausf A panthers were produced without zimmerit. So you could build an early ausf A without zimmerit
@CookiesReviews6 жыл бұрын
This is a good looking build, can’t wait to see the diorama. Of the three new Panthers which is your favourite?
@Den_Stackars_Uttern25596 жыл бұрын
looks great andy
@TKs3DPrints6 жыл бұрын
have 2 tanks there. one as you say getting worked on. and use a normal kit next to it with another panther kit with the turret on it but still looking like its getting worked on even better use the turret from the other kit on the other panther. just an idea :)
@moorsbert6 жыл бұрын
Super idea with the diorama! maybe you can use an upscaled picture on 1 side of the diorama, it also gives depth?
@andrewjackson37616 жыл бұрын
Maybe you don't need to hide the lead on the light , build a wire cage around the lead light . Most garages just have a bulb with a cage connected to a long wire and they just move it any where they need light and just hang it on a bit of internal shelving ect
@yoan_denchev6 жыл бұрын
I love your drawings 😙
@bogdanionutpascu5 жыл бұрын
Really love your videos. Some constructive feedback on the filming, if I can say, try filming from one of the sides so that the camera doesn't bother you while gluing. Once again, i'm close to see all your released videos. I'm a new modeler and i learned a lot from your videos.
@megazone23376 жыл бұрын
Hi andy whatever you do, you always great... Can you do a video weathering a takom tiger 1? Much much appreciated, tqvm
@CelticThunde10666 жыл бұрын
These videos are awsome!
@baguettewithcheese38806 жыл бұрын
Andy do a tiger 1 with full interior! For an example the rye field tiger 1 middle production. It calls out a lot of colours but I'm not sure if the colours are right or not... Greetings from Sweden
@Boeing7346 жыл бұрын
I have an idea for your diorama. You cold put the tracks off to the side of the tank.
@zgecko66686 жыл бұрын
hey Andy, nice idea on the diorama, an idea on the LED is to have a strobe/random flashing bright blue light to make it look like someone is welding within the interior, both lights up the interior and also gives it some life. In the future also get the German maintenance set www.hobbylinc.com/tamiya-german-field-maintenance-team-plastic-model-military-figure-kit-1:35-scale-37023 to add a couple crew members.
@mrzoomzoom77246 жыл бұрын
Would you possibly also add figures to the diorama like workers/engineers working on the panther.
@andrewjackson37616 жыл бұрын
Great idea for dio . Maybe engine could be getting lowered into engine bay so we see all the great detail on the engine
@moparsrule8624 жыл бұрын
Not all ausf A had zimmerit, PEKO publication Panther on the battlefield 2 has photos of early ausf A on the battle field with no zimmerit
@tomcat23956 жыл бұрын
my idea for zimmerit on my Tacom Panther A late is to buy a Meng set
@atexc56046 жыл бұрын
So what do you think? Which one is better? This one, or Ryefield?
@TheSlugstoppa6 жыл бұрын
This idea of the factory diorama sounds astounding and am looking forwards to the next installment. Also sounds like you've got your 3 d printer back into action so getting on with the Tyranosaur ?
@ethantrinkley32926 жыл бұрын
My kit has different instructions on it so takom must have seen that the torsion bars should be on the same page
@edvinkarlstrom56726 жыл бұрын
Well, well, well... what ar’ ye 3D-printin’ in the background, Andy? Edit: OH MY GOD THAT DIORAMA SOUNDS AMAZIN Sorry, Im not irish or whatever that accent was but it was fun and I cant wait for the next two videos!
@samuelvasquez81706 жыл бұрын
Great idea
@TacoTeaser6 жыл бұрын
What are your thoughts about having a welder working on the tank and using an LED to dramatize weld light or sparks?
@td-master18416 жыл бұрын
Hi. I think You should do some older kits.
@dertrippel6 жыл бұрын
Since you had them in your shop, almost at the same time, it would have been a great idea to build the Takom and Ryefield kit parallel in sections and have the direct comparison. In look and the way everything is realized.... Ryefield had a lot more fotoetch up to this stage. Are they molded in plastic on the Takom kit, or partially just not there? Besides this, Takom seems to have the better fit.
@outdoorgentleman62366 жыл бұрын
Please do the light also!!!!
@TiberiusMaximus5 жыл бұрын
building this kit right now and am very frustrated w instructions, they dont show u exactly where the small parts on the transmission goes and there are no obviously holes to guide me, ugh
@VegasCyclingFreak6 жыл бұрын
12:27 Did they just leave the inside of the Panthers the iron oxide primer? I thought it was supposed to be white inside. Or is that just on some of the earlier Panzers?
@outdoors_review6 жыл бұрын
YES! DO THE DIORAMA PLS!!!!
@monkeycmonkeydu10646 жыл бұрын
Again, beautiful. Your shop is absolutly amazing! Keep up the great work. Is it possible to build and weather a "Gepard" flakpanzer 38t? I recently purchased one from your shop.
@timroberts696 жыл бұрын
Hey Andy, I'm an experienced modeller who is used to building big kits (such as the Deagostini Millennium Falcon, the Zvezda Star Destroyer with full fiber optic lighting and Randy Cooper's MLEV 5 Mars Hopper. I have been watching your videos for about a year now, and love some of the tank builds you do. What do you think would be a good kit to sink my teeth into, something with a full interior (I like the look of the kit you are doing now).
@o.b.72176 жыл бұрын
Apart from the Panther A and G (both with full interior), try this: www.amazon.com/Takom-Sd-Kfz-182-Henschel-Turret-Zimmerit/dp/B01I1F70VC www.migjimenez.com/en/takom/825-135-wwii-german-king-tiger-henschel-turret-winterior-without-zimmerit-.html www.britmodeller.com/forums/index.php?/topic/235016664-takom-king-tiger-135-with-henschel-turret-full-interior/
@timroberts696 жыл бұрын
Thanks very much for your recommendations Ollie. After going backwards and forwards for a couple of weeks, I finally took delivery of Takom's Panther A (Late) with full interior and I couldn't be happier. It looks like a cracking kit. I nearly got the King Tiger you suggested, but I liked the idea of a brand new kit (I got it the day it was released here in Australia). Thanks again for the suggestions.