How to build a Gable Soffit Ladder Overhang

Рет қаралды 142,393

2 жыл бұрын

Building a 16" wide Gable Soffit Ladder Overhang with 2x6's on my house addition.
Tip jar: Donations can be made here to help me provide everyone more DIY videos: www.paypal.com/paypalme/8bitF...
For product reviews or other Business related stuff I can be reached at cliffscast@gmail.com
3 5/8" LedgerLOK Flathead Screws : www.homedepot.com/p/FastenMas...
5 in. LedgerLOK Flathead Screws: www.homedepot.com/p/FastenMas...
HeadLok 6 in. Star Drive, Flat Head Screws: www.homedepot.com/p/FastenMas...
2x6 lumber: www.homedepot.com/p/2-in-x-6-...
4x6 lumber: www.homedepot.com/p/4-in-x-6-...
Rhodesia by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Artist: www.twinmusicom.org/
Rauchus by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Artist: www.twinmusicom.org/

Пікірлер: 71

@MindControlledSheepie Ай бұрын

This is the best most helpful video I've ever watched about any construction. Thank you!!

@hondafannn Жыл бұрын

I love how you included the little details, such as where and how many fasteners you use. Thank you sir! Few people show that.

@andrewdow1609 Жыл бұрын

You can always tell when someone is making their own project. The extra care and "over engineering" is always there. I tend to do the same thing for my builds. :)

@mikedavidson7470 10 ай бұрын

Same here!!!

@lonnieclemens8028 2 ай бұрын

This is a good video. You gave me some ideas and good advice. Now if it could just stop raining outside.

@yesmiperla1865 Жыл бұрын

Thank you so much for taking the time to explain any details. I love how you show what type of nails and screws, and how you nailed every every single piece of wood. One of the best videos ever you deserve a #super thumbs up.

@D.I.Y._All-in-One Жыл бұрын

Thank you

@j.a.armour2427 10 ай бұрын

Excellent video! No wasted words. Very clear. Concise. Just great!

@D.I.Y._All-in-One 10 ай бұрын

Glad it was helpful!

@gregben Жыл бұрын

Credit also goes to your wife/partner for helping behind the scenes.😀

@stevenbrownell2565 3 ай бұрын

excellent love the use of color coded dots the only thing i would have done is overlap the outside 2X6 so you dont have a full seem at the 8 foot mark

@jeffmykytiuk5642 Ай бұрын

Thank-you for that video. Just what I needed. I have a shed with roof rafters that do NOT extend past the shed walls- (I know!) I couldn't figure out how I could build an overhang that would not sag over time. The support at the peak answers that question.

@sigurdpanke2612 Жыл бұрын

I really appreciate your video. This is exactly what I need to do on an existing roof and I was wondering how to go about it. Your meticulous attention to detail in making the video makes it easy to see what you did.

@richvail7551 Жыл бұрын

Very helpful video. You have alleviated my anxiety. Thanks

@singhA1968 2 жыл бұрын

very good way to explain spicily when you mention inch by inch with extra animations

@D.I.Y._All-in-One 2 жыл бұрын

Thanks

@shantor100 Жыл бұрын

Thank god for the helper willing to climb a ladder and look up

@robertgibbs5022 3 ай бұрын

Fantastic video, very well explained. Thank you.

@jono9549 Жыл бұрын

I recently found your page and am impressed with your work quality and descriptions of the activities. Thank you for sharing the journey!!!

@MegsCarpentry-lovedogs Жыл бұрын

Thank you. I have bookmarked your video presentation to hold on to it for more reviewing as I prep for an extension build in the near future. Well done. I certainly deeply appreciate the visuals you did with colours to show where you nailed and screwed and what size screws you did. Paying attention to detail even when editing your video for viewers! Wow!👍💯 ☺🇨🇦🍁

@petewoodhead8859 Жыл бұрын

Well built. Well filmed. Well explained.

@chispas2004 Жыл бұрын

Thank you so much for making this video!!*****

@davidfriesen7748 9 ай бұрын

Excellent ! Just what I was looking for .

@Khary28 Жыл бұрын

Thank you for the detail!

@kevinripski Жыл бұрын

This was extremely helpful. Thanks a bunch!

@thomassawyer9478 2 жыл бұрын

Very well explained. Excellent video.

@petersmallidge 2 жыл бұрын

Great explanation! Thank you.

@nastytechniquez9685 Жыл бұрын

I’d recommend doing a 3 1/2”dropped end gable to run your lookouts into the next rafter or truss and back nail the lookouts and start your sheathing at the end of the ladder and it’s tied into framing with a cantilever and the sheathing, making it much stronger.

@stevelopez372 Жыл бұрын

Yes, typical method. This method is fine, but I would run the sheathing back at least two bays.

@nastytechniquez9685 Жыл бұрын

@@stevelopez372 depends where you are and the snow load for your area. This would fail inspection for me locally

@nftshiller8485 Жыл бұрын

Looks great

@Braddock54 Жыл бұрын

Great video. Thank you!

@chrispalffy3511 2 жыл бұрын

Nice job sir. Its great to see professional work done.

@D.I.Y._All-in-One 2 жыл бұрын

Thank you

@rafaelbrea6743 Жыл бұрын

Excellent

@johnoswald6192 Жыл бұрын

Nice work!

@frostireland 2 жыл бұрын

Nice explanation

@bryanbarrett9364 2 жыл бұрын

Nice job

@TimberLineNorth Жыл бұрын

Great video.

@ChefKevinRiese Жыл бұрын

Thx. Very nice video.

@viankalobosvalenzuela7456 2 жыл бұрын

Excelente trabajo 👌👌 saludos desde Chile 🇨🇱👌💯

@ICoulntThinkofAUserNam547 Жыл бұрын

this was an awesome video - love the nail pattern marking

@D.I.Y._All-in-One Жыл бұрын

Thanks so much!

@gregfrench1254 2 жыл бұрын

Amazing! I want to learn all you know. Very grateful for your help and time you have spent doing these videos.

@D.I.Y._All-in-One 2 жыл бұрын

Thankyou

@NateG369 3 ай бұрын

This is a fuccing really good video.

@lazarofranco1493 3 ай бұрын

Thanks new follower

@columbiainvestment6676 2 жыл бұрын

The roof tie in with existing roof video, has you uploaded that? i've been looking for it

@anthonybarker6314 4 ай бұрын

How do you do the layout so the sheets line up on center? I see you pull from the square end of the frame, but then how do you know where the angle will be cut?

@Belenus3080 2 жыл бұрын

not to nitpick but I noticed you didn't remove the last foot of sheathing up towards the gable end. You mentioned it in a previous video, and I thought it was a good idea. Anyways, I like your work and these videos!

@ceasefire9000 3 ай бұрын

If you’re using a 2x6 for your fascia do you have to also use 2x6 for the overhang ladders?Thanks for the great video!

@D.I.Y._All-in-One 3 ай бұрын

Normally yes.

@h2obreathe Ай бұрын

Would 2 feet be too big of an overhang using this method?

@D.I.Y._All-in-One Ай бұрын

Yeah, I wouldn't go past 16"

@GrampalettasCamp Жыл бұрын

Nice video. Any reason not to put soffit on underside of ladder before installing?

@D.I.Y._All-in-One Жыл бұрын

Thanks. You could, but it will make it harder to access nailing locations and also make it heavier / harder to handle.

@joecox9958 2 ай бұрын

CA local code allows 9" overhang like this. any body can confirm me it meets (where) code?

@Dannys.channel Жыл бұрын

Can you do a video about a cieling that floats off two walls. The back wall would be 9 feet wide The side wall would be 8 feet deep. Off the wall the 1 foot thick beam would go off the side wall 6 feet and cut towards the beam coming off th3 back wall that's 6 feet deep _____ [ ] [___/ Kinda like that above but with no spaces between the lines

@epg423 Жыл бұрын

I'm trying to figure out how to build big overhangs on 2 sides of a building, can it be done? Or should I change the design to only overhang on one side? I want about 4 feet on one side and as much as possible up to 12 feet max on the other side. Seems like it will be too hard and I'll have to put posts to support the 4 foot side, then overhang just one part of the roof maybe 10 feet using 30 foot rafters? Or 30 foot trusses

@jeffreydoliber2353 2 ай бұрын

Question why only 16" for maximum overhang?

@ST-0311 Ай бұрын

The weight that far out will cause it sag on the floating end. Actually, he is going over code which 12" is for a ladder rake. It's a little sketchy, but he did overbuild it with all those LedgerLok and HeadLok structural screws. Should be okay. The overhang can be increased to a max of 24", but another method of securing the fly rafter to the structure is required. The fly rafter can be attached with cantilevered boards called lookouts, outlookers, or outriggers depending on who you ask. I prefer this method regardless of the overhang. Not a fan of ladder rakes.

@reedjasonf 2 жыл бұрын

You say you made the ladder overhang 16" wide but did you account for the thickness of the sheathing?

@yamfingaz5598 Жыл бұрын

Guess you didn't watch start of video

@archangel20031 Жыл бұрын

The sound was great, then it dropped to a whisper, then slowly faded away.

@eiotclub1690 2 жыл бұрын

SIM card(data only)for 4G camera. For business, please check your email. Thanks

@justinstevenson2061 2 жыл бұрын

Ya for sure

@thishex Жыл бұрын

It was a good video, but I don't see professional carpenters using the structural screws you claim are essential. Why would they be when nails are stronger?

@-mejor-que-nostradamus-6152 Ай бұрын

I Have A Wife Like Your Wife, She Never Help Me With Things At The House And I Had To Do Everything By My Self, So I Decided To Fired And Put Her In The Street And Now I Am More Happy Than Before. Amén.