Its a video of angle grinder kick back. This video is a precaution for my viewers to give a warning about it.
Пікірлер: 297
@rapsy16994 жыл бұрын
Where did you get your safety sandals from?
@subhodipdas6523 жыл бұрын
🤣
@goku35213 жыл бұрын
@@techsikhwalvlogs wonderful... you got guts man
@earlyman0073 жыл бұрын
Paragon 😂
@matthewgibson65072 жыл бұрын
😂😂😂
@wakuku39162 жыл бұрын
🤣🤣🤣🤣
@Nagalior Жыл бұрын
1- Make sure the saw disk can support over the grinder's maximum rpm
@Batara1322 Жыл бұрын
Man just tell them not to do this. I do not know is this stupidity or less knowledge. I hear stories for bunch of guys cuting their fingers on arms and legs. Please guys dont do this.
@ritznoblejas3617 Жыл бұрын
A 14$ jigsaw will do the work cutting any size of wood to plywood from 1x1-3x6 its not worth it doing experiment just to cut a portion of wood trust me all you need to have is a expensive jigsaw blade mine was 10$ for 3 sets and can do the work without using a killer grinder. I also have grinder but it is exclusive for metal cutting and grinding only never will take a risk to lose a life or limb just to cut a portion of wood
@allrightsreserved3237 Жыл бұрын
@@ritznoblejas3617 you guys don’t see that he’s got the grinder turned so it’s spinning in the wrong direction? He’s trying to spit the sawdust out front away from him, so naturally it’ll kick back towards him, if the grinder was spun 180 degrees, he’d have more control, and if by chance he hit a nail or something, the grinder would jump away from him… I suspect the operator is just too dumb for his own safety
@skye-TV7 ай бұрын
is it ok if the grinder have a variable speed to reduce to correct rpm
@redyaryadi2964Ай бұрын
minimum rpm? what a joke
@kikofrancis0093 жыл бұрын
I work in the ER as a nurse. This is the common mistake of how to use a angle grinder. Use circular saw on wood
@mynameisbeam2 жыл бұрын
you’ve done the opposite of every safety rule mentioned when handling the grinder, holy damn
@AndyChristianLoyola4 жыл бұрын
the way you hold your piece, it's just an accident waiting to happen... and it did.
@melancholyme57083 жыл бұрын
Exactly 👍
@noahslat28743 жыл бұрын
Oh the list of things wrong with this... -Using a metal cutting tool on wood -no blade guard -the sandals -working hunched over on the ground -unsecured workpiece And the main thing this guy wants everyone watching to take away from the video is to not use an angle grinder on wood...
@serenestateofbeing10622 жыл бұрын
He should be cutting on the other side of the wheel. He's holding the grinder backwards.
@Protegit2 жыл бұрын
There is a blade guard mounted tho
@therespectedlex97942 жыл бұрын
By unsecured I guess you mean if it isn't heavy use the right wood clamps.
@ritznoblejas3617 Жыл бұрын
guard is useless if you use a cutting disc for wood it wont shutter..but the most stupid thing is using a angle grinder just to cut a wood
@ChargedPulsarАй бұрын
It's all about life expectancy.
@zoozolplexOne4 жыл бұрын
thank you very much for the advice, very good warning!!!
@lyonscultivars2 жыл бұрын
For safty to prevent kickback the removed meterial should be pulled from the meterial to be sliced or ground. So if it was to bind it will pull up and away from you if you are to loose controle. Was nice to see you running the guard on it. I had a flapper disk injury where gard was not on due to flat sanding sheet steel with it. Got a nice gouge out of my knuckle.
@angryzombie80883 жыл бұрын
Thank you now I will be wearing a medieval full metal plate armor when I do woodworking.
@ansarifaizan1444 жыл бұрын
The way you are using it, even if you had used it for angle grinding, you would have met accident. You are not holding it properly.
@LOREGUINNESS3 жыл бұрын
True. Bad used of tool not material actually
@roshanthapa9653 жыл бұрын
What a joke ! Do you know the proper way of holding?
@danielmogos89902 жыл бұрын
@@roshanthapa965 You can start by not putting hands on what you are cutting, and continue with holding the grinder with both hands
@airportdocumentaries2 жыл бұрын
@@roshanthapa965 There is a reason why the is a grip handle on the angle grinder, you're supposed to have both hands on the grinder
@hafiezsuntrack81004 жыл бұрын
Hold with both hands (use plastic holder). Grinder direction is wrong. Blade should be on left. For wood, run grinder from front to backwards. No kickback. To be safer, use Graff speedcutter disc or Bosch multi disc
@ecworks4 жыл бұрын
I think you are right...Thanks for your comment
@cinderburn26602 жыл бұрын
Also, secure the wood you are cutting. The reason it kicked back is because you cant hold the grinder with one hand while also trying to keep the wood from moving.
@andyjame831711 ай бұрын
I had a lot of old pipes and rebar to cut up and from what I read kzfaq.infoUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
@benjaminhook79113 жыл бұрын
Grinder Safety 101 Hold it the other way so the guard is on the right of the grinder. In the video it is one the left. You know you're holding it right when the sparks or woodchips are spraying towards you. it won't kick back. This is coming from a welder who learned grinder edicate the hard way. The way he's holding it is how you get grinding disks explode in your face.
@dexterboro18363 жыл бұрын
Can u explain me nicely my English is weak and I am thinking to buy one so help me pls😅
@benjaminhook79113 жыл бұрын
@@dexterboro1836 the blade spins counter clockwise. The part of the cutting wheel that is cutting should cut towards you pulling the grinder away from you. While holding the grinder the blade should be on the left of you so the extra handle sticking out the side should be sticking up and on the left side of the grinder.
@dexterboro18363 жыл бұрын
@@benjaminhook7911 oo thanks for ur help😊
@patangpecotot48772 жыл бұрын
@@benjaminhook7911 pardon me, i am still confuse what you mean. And does your tips apply for cutting wood or steel? Or maybe for both. Becouse Some people tell me the method of cutting metal & wood are different.
@benjaminhook79112 жыл бұрын
@@patangpecotot4877 Admittedly I've never cut wood with a grinder. My guess is there's a bit different technique to it. As far as my advice goes it is still true. If the saw dust blows towards you then you are good. If the grinder binds up it will pull away from you and not towards you. No different than a chainsaw. Especially with wood discs I can see you losing a finger. I'll take a metal cutting disk over a sharp wood disk if it tries to eat my hand
@alexilee63494 жыл бұрын
good warning but it happens when you hold the grinder like that and if the wood is not properly ready for angle grinder cutting. anyways it still a lesson
@plywoodcarjohnson54123 жыл бұрын
I use it for wood carving all the time. Mainly "attack" with the front of the saw. It's not like cutting metal. And hold it with two hands. A lot of backcuts but I got used to it. Roll with the punches!
@sukumar86794 жыл бұрын
Thank you ec works for your precaution.Go ahead. Best wishes.
@pedrogutierrez73773 жыл бұрын
Grinders come with a handle for a reason. Yeah it will still kick back but holding it right can help a lot. Clamping it works wonders too.
@BudgetGamer-jy5tx3 жыл бұрын
Thanks for advice
@A.Nick243 жыл бұрын
Blade teeth in wrong position and Full Speed locked .. that's your problem! Try doing from other side with firm grip of machine and the wood too.. and don't press down while holding tight. And one finger always ready for stop switch.
@bennysonordonez85303 жыл бұрын
i see that incorrect position
@ravisubramani78684 жыл бұрын
Very useful video thanks for this video
@marcinstrogg3 ай бұрын
Yesterday in my workplace not very smart guy used big angle grinder to cut wood. He mounted cutting disc from wood saw. In a split second, the blade plunged into his left leg, nearly severing it. Safety first!
@l.l.30734 жыл бұрын
The tool is not the dangerous its the user.... please go and demo how dangerous it is to drive on the freeway "the wrong way with your eyes closed"
@hirakjyoti20992 жыл бұрын
Thankyou very much
@ankala19882 жыл бұрын
Thanks ! For sharing
@bushboysracing38983 жыл бұрын
2 hands on the grinder, and one foot on the thing you are cutting
@pointyfox3 жыл бұрын
It looks like what happened is that the force from cutting caused the wood to move. Once the wood moved the slot that was already cut pinched the blade and caused the wood to get thrown forward and the tool to get thrown backward. He should have had the wood in a vice and should have used two hands to hold the grinder.
@sgankarg96712 жыл бұрын
Exactly, when working with a tool like this it is necessary to have a better fastening on both the cutter and the material. Holding the material and the tool lightly will invariably lead to accidents. A lesson to beginners.
@UmeshKumar-rd6rn3 жыл бұрын
😳😳😳😳 its very very helpful thankyou sir
@jayeshchaudhari25233 жыл бұрын
Thanks for sharing and caring
@vassiliairton4 жыл бұрын
Grinder can be user for wood cutting. The problem is that you don't hold with only one hand, you don't cut from the top (aways from the edge) and you need to hold the matterial somewhere to do this. And for god sake use PPE.
@dgrgdewetart80052 жыл бұрын
Thanku sir ji video banaane ke liya god bless you
@raufbaheruni Жыл бұрын
Very nice information brother 👌👌👌
@swarupjadhav4672 Жыл бұрын
Thanks
@luckyboy4074 жыл бұрын
That kickback is frightening.
@Electronichub_05 Жыл бұрын
I know someone who cut into his arm because of this bs
@ellambydefault97153 жыл бұрын
Great warning for safety
@ModifywithManoj2 жыл бұрын
The blade should be on left side, or u should check the rotation direction. If its opposite then it will be kick back.
@vishnunatraja3 жыл бұрын
A friend of mine had a serious injury to his hand in an accident while cutting a piece of wood while working on the tile.
@dewatube1233 жыл бұрын
can use a grinder to cut wood.. but must use an additional extension to hold the kick back and the rotation must be slowed down
@privateassman88395 ай бұрын
Cutting with the wrong quadrant of the grinder. Use it in a manner so the spinning motion pulls the blade away from you, not into you
@kissofdeath44493 жыл бұрын
Holding it away from body doesn't mean it's safe. Holding the grinder and the wood firm and steady is important. And at least a minimal safety gears.
@anthonylirio29123 жыл бұрын
You should have clammped the wood, then hold the grinder with 2 hands using aux handle. It will kick back if you hold it like that.
@SynysterGuitarX3 жыл бұрын
Clamp wood. Hold grinder with both hands. Don’t wear flip flops.
@jhamail3 жыл бұрын
And hold the grinder the other way
@redd6055 ай бұрын
I was thinking of getting one to cut my long tree branches I cut by hand to make it easier, but thanks for showing this .a angle grinder is the wrong tool
@ecworks5 ай бұрын
yes its very dangerous
@deanthibodeau22743 жыл бұрын
You can get wood carving/ cutting blades for it
@bunnyman101325 күн бұрын
Dont use the left side for cutting or gouging. Thats always going to happen. 12-3 o clock is your typical work area
@jz52663 жыл бұрын
I saw at least 5 big mistakes: 1. The man is not wearing protection gear (no boots, no gloves, and I supose no goggles, and no mask) 2. No clamps to fix the work parts. 3. Using that type of disk that is not so safe. 4. Holding the angle grinder with only one hand. 5. Holding the piece of wood basically with the fingers.
@ecworks3 жыл бұрын
Please mention that. I think it will be helpful for everyone going through the comments
@patangpecotot48772 жыл бұрын
What about the position of the blade? And direction of the cut
@Pardeepsingh00444 жыл бұрын
And how will hold the black handle ?? And there is a black handle for what ?? To grip or to see !!!
@sanjeevshrivastava35214 жыл бұрын
Huge dangerous kickback. I was saved by a wooden chair handle which deflected the grinder away from me.it all happened while I was using both hands. I think cutting wood by angle grinder is not a good idea.
@navinbhangale53803 жыл бұрын
Did a similar stupidity a few years go.28 stitches to the heel and ankle taught me, safety first.
@venkateshwarancr4729 Жыл бұрын
yes,agreed. 👍
@JassonQuill Жыл бұрын
i really dont like to use cutting wood angle grinder that kind of wood.. very solid. i rather choose hand saw
@NitishKumar-nu2yi4 жыл бұрын
You haven't installed the blade correctly as i checked out your other video.be careful.pls share the link for attachment
@ecworks4 жыл бұрын
Thanks for the suggestion sir....what link you are saying about ?
@kabart934 ай бұрын
if you only use correctly your grinder ,, your grind is in opposite direction ,,
@KaraokePubmain4 жыл бұрын
not recommended yeah. noted
@prashantgorde16912 жыл бұрын
This sandals are given to him personally by thor ..... And this are known as 'THOR'S SHEILD SANDAL'😂😂😂
@Gorky25 Жыл бұрын
Nobody explained why this happened. Did it happen because he wanted to cut the wood? Can this happen if you cut a metal?
@OscarGarcia-wv4qk3 жыл бұрын
I did the exact same thing as a newbie cutting steel tho using the right blade. But that still doesnt mean it cant kick back... now i have a big scar on my wrist
@gijigadget4 жыл бұрын
This video is showing how not to use an angle grinder for cutting wood. The tool is not dangerous, the operator is. Would you take a skill saw and try and cut wood like this? No, unless you have no experience using tools properly! 1. Secure the piece to be cut 2. Screw on the handle for your angle grinder so you can use both hands.
@Shiva_DIYer4 жыл бұрын
Absolutely right... Operator is wrong... Each and every electronic tool is dangerous if we use like this...
@valveman123 жыл бұрын
@@techsikhwalvlogs Of course, this guy in the video is a moron. No safety glasses, no gloves, no guard on the grinder, and not wearing proper footwear. This is an accident just waiting to happen...
@ragejenkins82372 жыл бұрын
That’s why you clamp your work and make sure the angle of grinder is to where the blade end is higher than the other end that way it kicks down and away from you
@riseld45 ай бұрын
You see that big black cylindrical thing attached to the grinder? Maybe hold on to that?
@muhammadshadiqabdullah37563 жыл бұрын
is he throwing stone to a spinning tyre ?
@jugantakataki7162 Жыл бұрын
If you don't know how to use then don't use
@user-cr4ut7gu7f5 ай бұрын
открути 4 винта которые держат редуктор к корпусу после чуть чуть выдвини редуктор и поверни в левую сторону так будет проще и удобнее и безопаснее пилить диск будет вращаться не на тебя а от тебя но и при случае если диск заклинит то болгарка отскочит вперёд зато останешься цел и не вредим но по инструкции нужно заготовку сначала закрепить а болгарку держать двумя руками
@vk58062 жыл бұрын
Same thing happened to me first when I used it
@thomassciurba5323 Жыл бұрын
One handed operation, sandals, workpiece not secure, no gloves, probably no safety glasses or long pants. Good lord, have some fear dude. You are very lucky.
@maniarasusamy5193 жыл бұрын
The cutting object must be anchored properly. Use of safety gears such as safety boots, gloves, safety goggles are important as well. Lastly, use 2 hands. GOD gave u 2 hands, use them wisely if not, u will end up losing them in an accident like this this.
@michellehavre6821 Жыл бұрын
my grinder flew off and slash the table legs and lucky did not slash my head as it fly everywhere until the wire broke
@vinaygodara66023 жыл бұрын
Its should rotate in other direction , or else it will hit the ground and then you. Change its direction - flip it ( grinder can be used by both side) .
@m4rckzer0422 жыл бұрын
Because you using a wrong rotation. You need switch the wheel on other side
@shady8273 Жыл бұрын
step on the wood and hold your grinder with both hands, firmly. and get out of the cut line. NEVER hold a dangerous powertool such as an angle grinder or a power saw.
@KaraokePubmain3 жыл бұрын
Well sanding is ok, but cutting is really dangerous in that case
@jimpyu5 ай бұрын
It happened to me once. It's just few inches away from my face when it happened. Thanks God it did not touch my face. I do not recommend this blade. Use a the proper tool instead.
@athaullamanala96424 жыл бұрын
Thera paaw katgaya kya?
@viomelt3 жыл бұрын
Lol face the blade in the other side if you're cutting it towards you
@masgiver Жыл бұрын
Scary...
@ritznoblejas3617 Жыл бұрын
A 14$ jigsaw will do the work cutting any size of wood to plywood from 1x1-3x6 its not worth it doing experiment just to cut a portion of wood trust me all you need to have is a expensive jigsaw blade mine was 10$ for 3 sets and can do the work without using a killer grinder. I also have grinder but it is exclusive for metal cutting and grinding only never will take a risk to lose a life or limb just to cut a portion of wood
@gsscotland Жыл бұрын
As soon as I saw the sandal lol
@ecworks Жыл бұрын
😀
@salahuddinsabir7052 Жыл бұрын
Hold it properly and you can manage it the way you manage gun recoil
@uk_small_tractors2 ай бұрын
Same to same mera sath howa 😢
@zzxd77208 ай бұрын
Just use both hands to hold the grinder. Put the piece of wood on a vise.
@sribalajitourist421511 ай бұрын
1. We should fix job material wise jaw 2. we should hold hand grinder by two hands . One in exteneded black colour hand holder. Another hand on cutting another holder
@yevgeniytsarkov72562 жыл бұрын
Should never use one hand to hold it
@aamikkalinin63853 жыл бұрын
I'm actualy scared to use angel grinder.
@jongillies48712 жыл бұрын
Damn bro your foot almost went bye bye
@bikashmahato2554 жыл бұрын
Yes thank you very much bro, i was about to commit the same thing. You saved my life😱😱😵 God Bless you my friend🙏🙏.
@Sinus-nx5sf4 ай бұрын
Wood Tight in C clamps and Use Two hands
@vaampa_gaming693 жыл бұрын
Aah..bro ..we should hold the handle bar too....then we can reduce accidents...and we should hold the grinder in proper way .. ..
@Donald-dh7rw3 ай бұрын
Which one are you ?? Bodgit or Scarper ?? 😂😂😂
@eugenenoah66393 жыл бұрын
driving car is also dangerous with and without safety belt. so extra careful is indeed needed all the time.
@jamesharback61548 ай бұрын
Well, his obvious mistake was not holding the wood down with his flip-flop protected foot.
@goku35213 жыл бұрын
bro....flip grinder and use it. You are holding the wrong side. if the grinder catches it should run away from you, not towards you. Be safe bro..
@168116Tkt123 жыл бұрын
• Your workpiece should be securely fixed properly before grinding! • You fail to observe the basic safety in using high-speed tool!
@roshanthapa9653 жыл бұрын
Hey that means if you put on all the super high class safety materials, there won’t be kickbacks? Man its not about using safety materials, its about how to avoid kickbacks.
@grandmastersemos843 жыл бұрын
Nice Flip flop
@naumanahmadtariq87173 жыл бұрын
first secure the wood in a vice and use angle grinder with the handle
@budgetpilgrim3 жыл бұрын
There are dedicated wood cutting blades for angle grinders, the normal circular saw blades cannot be used on angle grinders it will definitely deliver kickback.
@pant.brachannel93303 жыл бұрын
Hold the handle dont use it with single hand
@gammonbunji9292 Жыл бұрын
the blade is set to push back into your body instead of forward
@SuperJacobe3 жыл бұрын
One hand, bound to happen
@pusatedukasireviewchannel99022 жыл бұрын
Serem
@Daydreamkt3 жыл бұрын
There is a handle to catch it... Plz use that properly.
@yulhambasir25723 жыл бұрын
It is okay to use it for cutting wood. It is just the way you hold the grinder that is not right. You should hold the handle with one hand and the other hand holds the body of grinder. And please buy the one with speed variable/controller, or at least set it manually to a dimmer