Angle Grinder Sliding Cutting Jig

Рет қаралды 5,983,165

4 жыл бұрын

Hello Friends!
I made a grinder stand with a linear guide slide mechanism.
↓Click here for the plan
jisaku-koubou.com/downloads/a...
【Plan List】
jsk-koubou.stores.jp/
This jig is designed to use a disc grinder safely.
There is no need to hold down the material by hand, and the handle is ergonomic and easy to use.
The slide moves about 250mm. Wide materials can now be cut with high accuracy.
Epoxy resin and aluminum are used for the linear bush housing.
In addition, a thrust bearing is used for the rotating part, achieving high accuracy and smooth rotation.
The linear bush has a dustproof felt bush attached.
Thrust bearings have a structure that prevents dust from entering.
Thrust bearings are inexpensive and cost less than 600 yen. You can make it cheaper than it looks.

Пікірлер: 1 400

@jisakukobo 3 жыл бұрын

@user-rm5px5ts7r 3 жыл бұрын

Пожалуйста сделайте торцовочная пила и дисковый пила

@stephenkane5074 3 жыл бұрын

Great video, short, sweet, you make it happen

@antoniomarquezcamacho1237 3 жыл бұрын

Ñññ

@gamalierulloahernandez7782 2 жыл бұрын

@JoseRomero-zb4hb 2 жыл бұрын

@Mr_Feyshade 4 жыл бұрын

I never thought I would see the day when an inexpensive power tool, like an angle grinder, would be turned into a piece of precision equipment. Thank you for all the hard work you put into your channel. You have raised the bar for diy KZfaq content creators.

@francisconascimento2034 4 ай бұрын

Fantastic very good, thank vermat

@Ashe_Fenrir 4 жыл бұрын

The precision you achieve with your tools is really incredible. Thanks for the video!

@TOFANX1 2 ай бұрын

Truly, I have not found anyone smarter than you in woodworking… Best Regards to You… 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼

@barbarianatgate2000 Жыл бұрын

To paraphrase the Somali pirate in Captain Phillips, "Your jig, it belong to me now!" I've been thinking about something along these lines for some time now, but had never considered using the resin to stiffen the assembly. Once again, just brilliant and elegant solutions.

@glmoren 4 жыл бұрын

Really mesmerizing. Quiet, neat, peaceful... Hats off.

@thanasisathanasi4965 4 жыл бұрын

Yes, without stupid egotistic music and shit. THis is good

@techdiyer5290 4 жыл бұрын

@@thanasisathanasi4965 Thing is, he isn't talking so he could pu in music and you could just mute the video. unless you like sawing noises.

@alexharris8565 4 жыл бұрын

Never seen anything like that in my life. that was more like working in the kitchen. So clean and precise. Excellent.

@kuswab 4 жыл бұрын

Original video. Nice angle/camera. No stupid music. Great job. Yeah, love it.

@ovi3041 3 жыл бұрын

Симфония Любви в Деле с Прекрасным Дерижёром ,Это Наверное Дитя ТВОРЦА!!! Спасибо За Удовольствие! Пожалуйста Продолжайте Радовать! Респект!Надо Просмотреть Все Видео.

@user-tu9vj8po3b 3 жыл бұрын

Я в нирване, мои чакры очистились, до глубины всех моих потрохов охвачен эйфорией после просмотра этого ролика... Я получил огромное эстетическое удовольствие... Браво МАСТЕР!!!

@DMMIT 2 жыл бұрын

а чуть не блеванул!)))

@assessor6951 4 жыл бұрын

Thank you for 40 minutes of pure enjoyment. It was like watching a great artist paint. I will now start on my two-year project to make one!

@11111972cjb 4 жыл бұрын

Hahahahahaha

@danieltesema6378 2 жыл бұрын

I can tell this is not only a knowledge , it is a wisdom . As am looking your hands you're not a man you're a woman , so thousand times of my appreciation for you . I hope you will change the life of too many people through your videos all over the world . I put down my hut for you many times . Daniel

@ekoneko6958 3 ай бұрын

Its a man, older guy too 😂. I thought same thing, his hands are so smooth like he is a doctor not a wood worker lol

@EikiMartinson 4 жыл бұрын

That's a clever way to get the linear bearings to align, well done.

@homemadetools 4 жыл бұрын

Very slick! I like the handle and the overall cleanliness of the build.

@fellovercliff4525 4 жыл бұрын

I'm impressed. Not your average thrown together piece of crap like most KZfaq videos. Great design and great to watch!

@christiangeiselmann 4 жыл бұрын

Masterful on many levels.

@johnmanlow3003 4 жыл бұрын

You do some fine work, my friend, A true craftsman.

@danielibnz 4 жыл бұрын

Amazing. You’re an artist. All clean and clear Thanks for sharing

@dleivam 4 жыл бұрын

Brilliant.. the process,the end result, the attention to detail, the edition... wow! congratulations for go beyond of "god level" :-)

@robertobg1393 4 жыл бұрын

Absolutely amazing, thanks for sharing. In México we have an expression. "An image can say more than thousands of words". the language is not a barrier with your videos. Congrats.

@wikedcircle6398 4 жыл бұрын

we have that saying here in the USA as well...

@JuanPabloContrerasC 3 жыл бұрын

@@wikedcircle6398 here is your trophy mate.

@Mark45926 3 жыл бұрын

Here in Ukraine they say: "It's better to see once than hear a hundred times" :)

@StizaElias 3 жыл бұрын

This is by far the BEST DIY project (actually doable without an industrial workshop) out there. It is super handy, if your grinder breaks it doesn't affect the tool, great base and clamps, and perfectly executed. 10/10

@jguydanis 4 жыл бұрын

I am very impressed with the precision set and ease of design. wow.

@jaistanley 4 жыл бұрын

I love all of your diy tools.. you give me a lot of ideas and inspiration! Thank you for taking the time to make and post your videos. Keep it up!! Great work!

@hendrikriedstra7857 4 жыл бұрын

As usual, a great video. You worked out a fantastic plan, and i agree with 'avinash khetmali' , your work skills an patience are are a credit to you. Again a thumbs up from me.

@Muzzledoctor 3 жыл бұрын

Are the 2.1k (at time of posting this comment) downvotes just from people who can't perform this level of skill and therefore have to dislike the video out of spite? I can't do most of what this dude is doing but I respect how well he does it and I pick up little things that I can use in my work.

@user-hm5jy1qy3d Жыл бұрын

Не устаю поражаться тому с какой тщательностью работает МАСТЕР!

@PH_SPO 4 жыл бұрын

Great job. You took care of every single detail. Astonishing!

@pikifrino 4 жыл бұрын

Amazing & excellent work. The top perfectionist ever seen. CONGRATULATIONS!..

@seleniumshutter 8 ай бұрын

I love how this is just one away from buying a motor and assembling an entire chop saw from scratch! This is fantastic!

@utoobuser206 Жыл бұрын

Man ...i swear you have the soul of a machinist stuck in a carpentry shop. Beautiful work. Personally i would have done all that with plate and angle iron, but you do you.

@andrebourque2165 3 жыл бұрын

I love how deliberate and precise your measurements and cuts are. Also, that you make so many useful instruments out of glue and plywood.

@moovintruespace994 2 жыл бұрын

You can bet he's using top grade beech or Marine though. Not cheap at all.

@ulrichkliegis4138 2 жыл бұрын

@@moovintruespace994 ... and I'd bet that we do not always see the first try... :)

@ryanfatratking 4 жыл бұрын

i love how precise you are with everything. It is a pleasure to watch!

@user-ue8dd2pc4s 4 жыл бұрын

Все сложно и долго можно и попроще сделать.

@user-zs3xi3td7w 3 жыл бұрын

Бесцветный лак для ногтей ему подари и крем для кожи рук... . У настоящего Мастера, работающего с инструментом - мозоль, а не маникюр.

@user-zs3xi3td7w 3 жыл бұрын

@@user-ue8dd2pc4s Понты для лохов колотит... . У болгарки диск вращается на "отрыв" детали с верстака, а не прижимая, помогая струбцинам... искры и микрочастицы - по всей "хате". Кого на&бать хотели... ?

@gtechnosinc2518 Жыл бұрын

This guy is a cnc manchine,so precised in his work.

@myetis1990 3 жыл бұрын

soo pofessional ... a relaxing video for makers... can not help myself to stop watching...

@charlesgomesdasilva4884 3 жыл бұрын

You're a great inspiration! I've improved a lot my skills watching your amazing videos! Thank you so much!

@linalapina4635 4 жыл бұрын

Перфекционизм 10го уровня. Работа для развития. Смотреть очень интересно! Спасибо!

@user-zt6bd3uj9j 4 жыл бұрын

09:17 рука снова тянется плюс нажать, а уже нажато :( :)

@user-fm4vm5ze5w 4 жыл бұрын

Это точно, прямо как с завода.

@billybike57 2 жыл бұрын

I’m a so-so DIYer but this goes way beyond my skill sets. I did enjoy watching, your work is exquisite!

@jlinkels 4 жыл бұрын

You deserve a prize for creating this video. Clear, no music, natural sounds and no elevated speed playback.

@user-si6ku3zy2s 4 жыл бұрын

Great work, golden hands and a bright head, thank you for the video, everything is very detailed and intelligibly shown! Good luck in future projects! Greetings from Russia

@juanvillagra5213 4 жыл бұрын

Saludos desde Paraguay. Que excelente vídeo. Usted es un Maestro.

@WolfgangEysholdt Жыл бұрын

Was der Mann baut, hat Hand und Fuß. Respekt.

@fesojgnillits1867 8 ай бұрын

Erstklassige Dokumentation der Arbeitsschritte. Das begeistert und hilft jedem Werker beim Nachbau, dazu trägt das Tempo als auch der Verzicht auf langes verweilen einzelner Tätigkeiten wie zum Beispiel schleifen. Andeuten ist völlig ausreichend. Weiter so.

@davidbaker2859 3 жыл бұрын

Very satisfying to watch this level of perfection, it's like a calming therapy session. Amazing ideas & excellent results. Thank you.

@snoopythecat3741 4 жыл бұрын

Thank you for the instruction movie and the ideas I got from watching it.

@aucomint 4 жыл бұрын

At that level it's not woodworking anymore but art. Congratulations and thank you for sharing this piece of inspiration.

@denniskean183 7 ай бұрын

Pristine, pedantic, and even the fingernails were as clean and clear as a babysitter's hands. It was brilliantly done down to the tiniest detail, bench, tools, and video. Do you have a camera team working with you? Fantastic and inspiring presentation. If only all KZfaq videos would be so well done.

@choymalijan9614 4 жыл бұрын

this is like watching a painter making a masterpiece

@adenaliabdi2977 4 жыл бұрын

Japanese patience and precision, I agree

@forgamejust848 4 жыл бұрын

@@adenaliabdi2977 try 1.75x speed

@BergflitzerFoto 4 жыл бұрын

Das ist ein Projekt auf sehr hohen Niveau !!!!! Meisterklasse 🤩🤩🤩🤩🤩 TOP(!)

@kevinlaw7375 4 жыл бұрын

One of the best DIY ever seen on youtube. Very clever, neat, precise and durable design. You are so full of inspiration!!! I’m a big fan. 🙂👍🏻

@stewartthompson5039 3 жыл бұрын

Some years ago before I retired I was responsible for choosing Engineer Apprentices, and on the evidence of any one of your Vlogs, I'd have employed you on the spot. You look slow, but there isn't so much as a single wasted movement in your work, every move is economical and definite. You are already a proficient craftsperson (very pc), and the sky is the limit as to how high your chosen career will take you. ........ Superb Work, and Superb You. (huge applause from everyone)

@BirdmanNorfolk 4 жыл бұрын

The quality and attention to detail in your builds is nothing short of astounding, there's nothing that looks home made or just knocked together, I have to wonder if you are an engineer by trade, your kit may be home built, but it would put a lot of commercial products to shame, I love the fact you show what you are doing clearly at every stage, making it simple to follow the steps and build your own projects, very well done my friend

@antitheist9976 4 жыл бұрын

Outstanding machine, nice work, your attention to detail, tidiness, neatness and overall skill level is a pleasure to watch. Cool mate :)

@MasterofTongs 4 жыл бұрын

It might have been cheaper to add some functions onto a chop-saw, but it is still a pleasure to see a craftsman at work.

@aliwaheed9956 4 жыл бұрын

King of DIY, amazing great work, never seen such a clean work without any unnecessary talks.

@montellanof 4 жыл бұрын

Thanks to youtube recommendations, wonderful skills. Added to my watch list.

@Pho8os 4 жыл бұрын

Everything feels so precise, when I have a stressful day at work I come home and put your channel on and feel calm again. It is like meditating.

@mindseyeproductions8798 4 жыл бұрын

defined as: ASMR; Autonomous Sensory Meridian Response

@GLACIOUS13 4 жыл бұрын

@@mindseyeproductions8798 Kewl! New word! Thanks.

@mikereynolds3213 3 жыл бұрын

Excellent Craftsmanship, very precise and accuracy is second to none. Keep the videos coming as they leave scope for individual set ups with adjustments made as per your own requirements

@gaguzman7755 4 жыл бұрын

Tremendous video! A quiet, well shot video with clearly demonstrated steps , and impressive precision with metal used only if necessary. Like seeing your other created tools also being used.

@antoniorobertonovoademenez3257 4 жыл бұрын

Magnifico mestre, sua habilidade e paciência e talento. Parabéns.

@amilcardeleont.4825 4 жыл бұрын

Darle gusto a nuestra inventiva y creatividad, es todo un reto, más, cuando tenemos capacidad económica. Lo que hace usted, mi amigo, son obras dignas de un ingeniero poniendo a prueba su conocimiento y destreza. Quienes no tenemos sus conocimientos y habilidades nos conformamos con diseños más simples y baratos. Me gustan mucho sus adaptaciones y ejecución.

@robertallaire432 Жыл бұрын

Hello SIR, You are one of the best in wood machining but not the best in scrap metal. For sawing, as for the file, the effort must only be on the forward part of the tool, the return must be "raised" so as not to wear out the file like the saw blade. This is one of the first things that apprentices are instructed to do. Even with good theoretical knowledge, I can't compete with you. Thank for all Sir

@Avel_runner 3 жыл бұрын

This is just so well made, what a wonderful work you put in your videos! Thanks for sharing this content with us

@valerimarchenko8845 4 жыл бұрын

Аккуратность в работе, чистота рабочего пространства, точность в исполнении. Достойно уважения к мастеру. Респект.

@Heseblesens 4 жыл бұрын

Just brilliant, the ideas, the setups, the executions, the everything. This lady sure is an artist!

@KrazeeKraftZ 2 жыл бұрын

Lady???

@Heseblesens 2 жыл бұрын

@@KrazeeKraftZ l think I was fooled by those neat hands at the time, or the autocorrect feature on my mobile was 😄

@davidjames2145 3 жыл бұрын

Precision. Calm. Precision. Calm. Precision. Is this therapy? I just wanted some inspiration for making a mitre saw from my spare grinder that wasn't a piece of junk. I feel all better now. 🙂

@moovintruespace994 2 жыл бұрын

What you did to that acrylic block was simply divine, and I love your use of guides and mini clamps.. so kool x🤘🏼

@JavierChiappa 3 жыл бұрын

I love when machines are so useful that they start making themselves

@johnjacobjinglehimerschmid3555 4 жыл бұрын

Pretty interesting ... Well .... really it's damn cool! I've been trying to think of a jig for either an angle grinder like this, or a bench grinder that would allow me to place a lawn mower blade on it, set the correct angle 30 deg. Then just allow me to easily slide the blade or grinder back and forth. Still thinking but this was really cool. I like the "clear" acrylic or plastic what ever it is/was. Very professional looking.!

@skyedangelo3237 4 жыл бұрын

just take a 2x4 and cut a 30º bevel with a circular saw (using a level or even another 2x4 as a straight edge) then clamp your blade so that the face your grinding is parallel with the cut face on the 2x4. grind till flush

@Alkatross 4 жыл бұрын

I just use a cheap bench grinder for the mower blade.

@kennethhicks2113 2 жыл бұрын

@@skyedangelo3237 Or use a miter to just cut a 30 deg slot in the 2x4.... to hold the blade, then just grind with grinder flat/level on top.

@jensboehm782 4 жыл бұрын

Hello. This was a real pleasure to see how accurate and for the love of details you get into this! How silent, calm and gentle you work is awesome! Even torque of screws is on very top. I´m stunned! This is DIY at its best and how it should be done! Greetings from germany :)

@agustindelagarzap.2878 4 жыл бұрын

I have seen many designers of artifacts for carpentry, but yours with no exeption are all very good, My congratulations to a mind so dedicated, to the minor detail on each piece!!!

@robt2151 4 жыл бұрын

Excellent meticulous work - just needs a power switch on the handle so you can turn it off immediately the cut is complete. And bravo! for no stupid background noise.

@ronnie902 4 жыл бұрын

...first I thought, oh my God 40 Minutes, but then, I watched it till the End !

@lindam.9282 4 жыл бұрын

Wow! This was, by far, the BEST instructional video I have seen and "NOT HEARD"..So easy to concentrate on what you were doing instead of listening to awful music..Very peaceful and totally informative. Thank you! You are definitely an artist..Loved watching you work.

@johnnybotz 2 жыл бұрын

I have been a carpenter and crafts man more than 45 years Mostly residential construction and renovation. Unless you have formal training as an engineer, I am sure you are a genius. I am looking forward to watching your other presentations.

@KeithOlson 4 жыл бұрын

Something I never thought that I would find myself saying to a content maker: Thank you for *not* adding music to your video; it isn't necessary and we can play our own music if that is what we want.

@TsuziQMadeinTaiwan 3 жыл бұрын

I actually do enjoy the sound of power tool, LOL 😉

@actionjksn 3 жыл бұрын

Oh God the music is incredibly irritating, these people really need to just stop with it.

@1carlosalejandro322 4 жыл бұрын

Amigo: la prolijidad y tranquilidad con las que trabajas, más la belleza y eficiencia de tus proyectos, son motivos de placer al ver tus videos. Se aprende mucho contigo. Abrazo desde Argentina.

@bigfatdrum 4 жыл бұрын

nice build.. i liked the resin shaft bearing piece. and then figured out you weighted the head piece..great video too. Thank you!

@josemanoelgferreira9418 4 жыл бұрын

It is not a garage job, it is a garage show. Congratulations and thanks for sharing your talent.

@ipanemablagadigidu1773 4 жыл бұрын

Awesome. I just watching every single second in this great video!

@michaelcherry8952 4 жыл бұрын

Your creativity and attention to detail never ceases to amaze me. Bravo!

@vizionthing 4 жыл бұрын

Everything held securely while drilling and cutting .... a rare and refreshing sight, awesome video and project.

@vincentiussurya7978 2 жыл бұрын

you are the type of worker who is very smooth, careful and precise. Best Quality Work.

@GregorKropotkin-qu2hp 4 жыл бұрын

This is work of the most exeptional quality-I enjoyed watching it so much I did so at .75 speed!

@user-uc3vh1fd4l 4 жыл бұрын

Такого аккуратиста я ещё не видел!!! Образец для подражания!!! Super RESPECT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@user-ou3qj6jd2d 4 жыл бұрын

В чем образец? В бестолковом использовании инструментов?

@RobsonPampulha 4 жыл бұрын

The thief always comes back to the crime scene. Everything was very perfect. There had to be an error and I found it. The rasp must be used in only one direction for the effective cut and to obtain precision. Wonderful job. Congratulations. Won a fan!

@user-fq6co7vx2b 3 жыл бұрын

ARISTOCRAT!!! GENTLE HANDLES, FINE FINGERS, BUT HOW BEAUTIFULLY WORKS! I VERY LIKE CARE AND SPECIAL ATTENTION TO Trivia (WHICH IS NOT IN THIS BUSINESS). CREATES MASTERPIECES AND CALLS TO WORK BEAUTIFULLY. SURE, QUALITY TOOL, VARIOUS ACCESSORIES, EXCELLENT ACCESSORIES, BUT WORKS LIKE AN ARTIST! BRAVO!

@user-uv8sj1kc3g 3 жыл бұрын

Ну мужик ! Он просто кайфует от своей работы-молоток!

@user-lk2dw3rf5g 2 жыл бұрын

А когда фанера под жестью загорится и возможно не сразу будет вечный кайф!!!

@gustavrein255 4 жыл бұрын

You are the best craftsman I have ever seen on you Tube. Your ideas are great. Thank you very much

@YoussefMekin 4 жыл бұрын

You are my hero from now on!!! Incredible!! 😍

@servanetisne2167 4 жыл бұрын

Hello Smart and beautiful project, exactly what I was looking for doing parts of a 3D printer. Thank you very much for plan.

@pinkponyofprey1965 4 жыл бұрын

Like a sushi master chef doing woodwork! :D Exquisite !!!

@GLACIOUS13 4 жыл бұрын

Itadakimasu!

@SpeedFreak62 4 жыл бұрын

Cool projekt ferry nice i like your work and your vids...thx for share it, greatings from Germany.

@SteveStaves 2 жыл бұрын

What is really nuts, is that I just watched this from beginning to end knowing full well that my skills could never pull this off. Yet, the precision and neatness kept me riveted. I have purchased one of the plans which I hope will be more my level - the Multi-track guide. Exceptional work.

@bobbgrygor5964 4 жыл бұрын

Здесь основной акцент сделан на изготовление сего станка, да и всего его оборудование, что сделано собственноручно, на дерево, на фанеры разной толщины. Что, не только из металла можно всё делать. Конечно респект за труд, за умение создать, за чистый подход к делу. Конечно, через чур все "нежно", если можно так выразиться, но грамотно и красиво! Смотрел с удовольствием!

@MrSerpent44 4 жыл бұрын

Многие решения спорны, но работа сделана как минимум красиво!

@igorerofeev3216 4 жыл бұрын

Отрезал не ровно, что и показал на 34-ой мин

@aliyuk 4 жыл бұрын

@@igorerofeev3216 длины стола не хватило и зажимов... сделано Красиво и Аккуратно!

@igorerofeev3216 4 жыл бұрын

@@aliyuk . Диск гуляет. Переделал таких несколько стоек. У знакомых тоже по гаражам надраенные стоят, прям блестят. А пилят все одинаково.....

@igig2427 4 жыл бұрын

@@igorerofeev3216 Я думаю, упоров должно быть два, а не один мешающий работе и массивный, впереди. Как например у Gökmen ALTUNTAŞ. Качество изготовления и само воплощение на высоте конечно, но это так, в удовольствие поиграться..

@igorerofeev3216 4 жыл бұрын

@@igig2427 сплошь и рядом, за шиком и блеском кроется пшик. Как за накрашенными губами, банальная физиология.

@user-re2co9ts2m 4 жыл бұрын

инструментальный фетиш :)

@user-fq6co7vx2b 3 жыл бұрын

ОСТАЁТСЯ ЗАВИДОВАТЬ МОЛЧА...

@user-xf1ff5mj7k 3 жыл бұрын

Тоже не понимаю зачем. Без этого нельзя ровно отрезать ? Смысл городить то?

@user-lk2dw3rf5g 2 жыл бұрын

Василий Тёркин А когда фанера под жестью загорится и возможно не сразу будет вечный кайф!!!

@pavelnesterov5554 4 жыл бұрын

If you make those bars long enough, this set up would be a sweet system for cutting ceramic tile with a grinder. Will definitely put this device to do in my bucket list. 👍

@fullerspubcollector 3 жыл бұрын

Are you a surgeon? So neat, tidy, precise, detailed and practical. A joy to watch and learn, thank you.

@jameskirk3210 4 жыл бұрын

Wow! Amazing gig, perfectly done with a system mecanics of high grade. My only concern, if I can: you perhaps trap high temperature sparks inside the saw slot and burn your gig (and perhaps more?). 👌👍🖖

@lunatic206 4 жыл бұрын

At first that was my concern too. But I think that the airflow that might keep a small fire going is too little inside the slot. And the metal topping also cools down the wood a little bit.

@lsimpson6223 3 жыл бұрын

May not seem like enough air to combust instantly. More of a concern is if there was an ember that smolders. Maybe some saw dust nearby that was neglected and just before leaving for the day or to leave the area unattended. Had a personal experience with a smoldering ember that caused minor damage, but only because it was caught just in time. Just seed for thought.

@aksdiyprojects1999 4 жыл бұрын

Beautifuly made.. !! Love your clealiness neatness and patience as well.. all the best

@alexandrnesterenko3269 4 жыл бұрын

А ручку полукруглую слабо?

@alexandrnesterenko3269 4 жыл бұрын

А борщ слабо. Не уверен

@alexandrnesterenko3269 4 жыл бұрын

Подумал почему бы в школе на трудах не учить детей этому

@alexandrnesterenko3269 4 жыл бұрын

В школе на трудах детей учить. Занимательно

@adelkeryakos2641 4 жыл бұрын

You are a genius! I suggest that you patent and mass produce your inventions. With the millions that you will certainly make, build special vocational schools and teach hundreds, if not thousands, of gifted students to become like you-- or almost like you. God bless you more and more ❤👍❤.