ANN Training Software Tutorial (1)

No video

ANN Training Software Tutorial (1)

Рет қаралды 5,809

Күн бұрын

This is a new training software. Digital reproduction of analog effects sounds.
If the computer configuration is not high enough. You can send the recorded WAVE files to us through the cloud disk address for training.
ANN Training Software Download
1、👉www.m-vave.com
(Click the website to enter, find【Download】, click 【Other Software】page, and click ANN software download)
2、👉mega.nz/folder...
There are also some sound files available for trial use
Timbre file
👉mega.nz/folder...
ANN Training Software Tutorial (1)
👉 • ANN Training Software ...
ANN Training Software Tutorial (2)
👉 • ANN Training Software ...
ANN Training Software Panel Introduction
👉 • ANN Training Software ...
These video shows a timbre comparison using digital reproduction using training software.
ANN Training Software Comparison Of Timbre After Digital Reproduction (1)
👉 • ANN Training Software ...
od1.2.am2Data -(Data file)
👉mega.nz/file/R...
ANN Training Software Comparison Of Timbre After Digital Reproduction (2)
👉 • ANN Training Software ...
od3.am2Data -(Data file)
👉mega.nz/file/w...
ANN Training Software Comparison Of Timbre After Digital Reproduction (3)
👉 • ANN Training Software ...
mt1.am2Data -(Data file)
👉mega.nz/file/M...
@ Facebook： / mvaveofficialis
@ Facebook ANN Official Group: / annofficial
@ Facebook M-Vave / Cuvave Official Group： / mvave
@ Facebook M-Vave TANK-G Official Group： / mvavetankg
@ Instagram: / mvaveofficial
@ TikTok： / mvaveofficial
Colors by Cykarl / cykarl
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/48YkQa3
Music promoted by Audio Library bit.ly/4b1BzLd
#mvave #electricguitar #effects #tankg #software #pedal

Пікірлер: 98

@M-VAVE 4 ай бұрын

The file name for importing ANN software cannot have a space symbol, but can have an underline. Otherwise, the file cannot be used. If you want to send us the file, please name it according to the name and model of the effector, and each effector should be in a separate folder. The name of the folder must match the name of the WAVE file

@bbencemusic 4 ай бұрын

I would like to send you, how can I reach you? unfortunately, I couldn't get help on Instagram or Facebook.

@tunelow 4 ай бұрын

You share some ann files with guitar amps. Can you share some ann files of bass amps for Tank-B?

@bbencemusic 4 ай бұрын

I have an Aquilar preamp, so it sounds. I have a tank g: kzfaq.info/get/bejne/pJ2RmtWGz8mxc30.htmlsi=7Bp4BcVAz9upn02k

@M-VAVE 4 ай бұрын

@@tunelow Tank-b does not currently support ANN

@tunelow 4 ай бұрын

My losses stay on 0.9* level, batch size 1024, 1000 times. How to get 0.1? What could go wrong? UPD. I find answer. I set latensy to 24 sepmples, as I measured. But when set 0 delay, loss become 0.01)

@wilkersacramento 4 ай бұрын

Hello, I wanted to make a suggestion for improving the application. The option to reset all factory presets could be more hidden, in another tab perhaps, or before the person clicks there, a question appears, if the person is sure they want to restore all presets. I say this because I lost everything, for the second time, for the simple fact that my finger accidentally bumped it. This option could be more ((hidden)), because any little touch erases everything, I hadn't even saved them all, and this is the second time this has happened... 🤦🏾‍♂️ Please fix this urgently! I don't even have the courage to use the app live, because of this situation!

@NegoGuitar 4 ай бұрын

🔥🔥

@jonathanferreira5345 4 ай бұрын

Só pelo review do @NegoGuitar 🙏🎸

@MichaelMyersDoverPA 5 күн бұрын

Why are you not using a re-amp box between the audio interface out and the pedal in? You're sending a line level signal to a pedal that is designed for an instrument level signal the way it's shown in the video. Noise is going to be a huge factor this way, isn't it?

@profEdison 4 ай бұрын

How change "CPU Train" for "GPU Train" in the train's STEP? It's taking too long for the CPU, and I can't change it.

@leonelguitarra 4 ай бұрын

Estou com o mesmo problema e com isso demora 6 horas para fazer o processo ou seja impossível, ele não está habilitando a placa de video...

@luisnegrao4948 4 ай бұрын

@@leonelguitarraPelo que entendi e testei só funciona em placas nvidia porque usa a arquitetura CUDA, tecnologia proprietária da nvidia.

@thanhtammetal 24 күн бұрын

same to me

@MichaelMyersDoverPA 3 күн бұрын

Can you provide more detailed information about the training parameter screen's options? What are the differences between Fast, Medium and Slow that are now shown on version 1.0.3? How about the "Times" parameter? Is there a better model produced if a value of 1000 is specified?

@M-VAVE 21 сағат бұрын

Fast, medium and slow refer to the intensity of learning, which can be adjusted according to the user's own requirements. 1000 is just a basis, 5000 is also possible, but it depends on your file. Sometimes 1000 times and 5000 times have the same effect, and sometimes too many times of practice will cause loss.

@rotylee 26 күн бұрын

will a gtx 1070 suffice for training? it is somewhat comparable to 3060 but older. is there a diagram of the cable hookups ?

@DDCrazy-xg6dl 4 ай бұрын

Agora a Nvidia se torna a maior empresa do planeta 😂😂

@user-os3vt8lm6g 4 ай бұрын

Thanks! What if i had already wavs of raw and reamp sound (another raw wav, from NAM for example). Can i use them? Or only need to record my gear? It's useful to add buttons to open reamped wav file instead of recording it. And will there be some web page or cloud where users can share with their created ANNs?

@tunelow 4 ай бұрын

great idea! But i think specific wave file "interrogates" analog effector and get some response. I think algoritm of program will absolete different if change analog effector to wav file with recorded analog effector. But still, it should be great get raw guitar tone of band you like and teach this sound to the tank-g))

@user-os3vt8lm6g 4 ай бұрын

For train tone of your favourite band you will need their DI and Reamp files. Almost impossible to find them Here i want to use di and reamp of NAM, proteus captures that i already got or can download. Or if i want to capture sound of my favourite vst amp - i can't just "record" in realtime, i need to export wav and then use it to train ANN

@federictella 4 ай бұрын

@@user-os3vt8lm6g it would be great to know a way to put the tonex or nam profiles in it

@artquantmindproject2116 4 ай бұрын

what program you use for check delay?

@M-VAVE 4 ай бұрын

@scarypoopoo8621 4 ай бұрын

the link to download is not working.

@MrWat 4 ай бұрын

What software name for check delay situation ?

@DoubleDguitar 4 ай бұрын

Right?! I have a file, now need to do that step.

@DoubleDguitar 4 ай бұрын

@MrWat I just found WavePad by NCH and in the view tab, select the wav file and choose frequency view and also multi channel view.

@M-VAVE 4 ай бұрын

AU. Any array software that can view audio waveforms is available

@worshipg 2 ай бұрын

@@M-VAVECan reaper do the job in viewing the delay?

@M-VAVE 2 ай бұрын

@@worshipg The AU we use

@anayv11 Ай бұрын

Hi, can this use both outputs at same time (1/4" and XLR)? thanks

@M-VAVE Ай бұрын

@exltd001 5 күн бұрын

All of a sudden the AudioTrain app stopped creating folder and AM2 file. The Record part works fine it creates the WAV file in the folder. But its the AudioTrain that fails. I reinstalled the Program. it worked for about a week and then it just stopped. I even did a new windows install and reinstalled the Sinco app. but the AudioTrain part still fails. I even tried forcing the AudioTrain to run as Administrator. Any help would be appreciated

@M-VAVE 4 күн бұрын

You can contact me on Facebook (M-VAVE Zhang) and send me a video of your question

@marionmusictv 2 ай бұрын

how sould i load available for trial use Timbre file ? when do it with m efects i got horrible noize

@M-VAVE 2 ай бұрын

You can contact me on Facebook (M-VAVE Zhang) and send me a video of your question

@StudioSe7en 4 ай бұрын

Hi , i did all the steps but after the TRAIN preset,,... the BIOS only appears but never shows all the parameters if it is training it. It does not become an amp

@M-VAVE 4 ай бұрын

You can learn exactly the same thing according to the video operation, or your file name is wrong.

@wilkersacramento 4 ай бұрын

Olá, queria dar uma sugestão de melhora no aplicativo. A opção de reset all factory presets, poderia estar mais escondida, em uma outra aba talvez, ou então antes fa pessoa clicar lá, aparecer uma pergunta, se a pessoa tem certeza de que quer restaurar todos os presets. Eu digo isso porque eu perdi tudo, pela segunda vez, pelo simples fato de que meu dedo esbarrou sem querer. Essa opção poderia estar mais ((oculta)), porque qualquer toquezinho já apaga tudo, eu nem tinha salvado todos, e é a segunda vez que isso acontece... 🤦🏾‍♂️ Por favor, corrijam isso urgente! eu não tenho nem coragem de usar o aplicativo ao vivo, por conta dessa situação!

@wilkersacramento 4 ай бұрын

您好，我想提出改進應用程式的建議。重置所有出廠預設的選項可能會更加隱藏，可能在另一個選項卡中，或者在使用者點擊那裡之前，會出現一個問題，如果使用者確定要恢復所有預設。我這麼說是因為我第二次失去了一切，原因很簡單，我的手指不小心碰到了它。這個選項可以更多（（隱藏）），因為任何一點點的觸摸都會刪除所有內容，我什至都沒有保存它們，而且這是第二次發生這種情況......🤦🏾‍♂️ 請緊急修復此問題！因為這種情況，我甚至沒有勇氣現場使用該應用程式！

@leonelguitarra 4 ай бұрын

Como faz para mudar , no meu caso na hota do train aparece CPU train e pra voces aparece GPU train , minha placa de video é AMD,como fazer o programa reconhecer ela...

@kemalfachrullah6365 28 күн бұрын

I'm afraid AMD card is not supported yet (or maybe in the future soon). Best choice is using Nvidia GPU (because their using CUDA unit for computing)

@sonidojamon 2 ай бұрын

No macOS app, right?

@M-VAVE 2 ай бұрын

@lentonemusic 2 ай бұрын

After training, loss is .07 is that good?

@M-VAVE 2 ай бұрын

@lentonemusic 2 ай бұрын

@@M-VAVEthanks for the reply, what can you change to make the capture more accurate to original sound?

@M-VAVE 2 ай бұрын

@@lentonemusic Just follow the video to record

@gonzalorasjido2492 2 ай бұрын

Does it only work with NVIDIA graphics?

@M-VAVE 2 ай бұрын

There will be a video tutorial in the near future on how to train ANN when the graphics card does not meet the requirements.

@CharlieCalduxo 4 ай бұрын

Can you upload a tutorial on how to record the wave file so I can send it to you? since my computer does not meet the necessary requirements. thank you!

@M-VAVE 4 ай бұрын

You can contact me on Facebook (M-VAVE Zhang)

@ZeeHatley 3 ай бұрын

Any plans for Mac versions of the tank g and ANN softwares?

@M-VAVE 3 ай бұрын

Not yet

@ZeeHatley 3 ай бұрын

@@M-VAVE bummer. It would be very handy.

@jamespizarra9201 4 ай бұрын

If loss is nan, what does it mean?

@emert0823 4 ай бұрын

i was able to make 3 profiles no prob. after that i was getting nan as well :(

@Utasuta3034 Ай бұрын

Is it work for Nvidia rtx 2060 6gb? If don't, how to make it worth? I want to buy tank g

@M-VAVE Ай бұрын

kzfaq.info/get/bejne/itZ2g8x41bTWZnU.html You can train through web pages

@worshipg 4 ай бұрын

Great update!!! Can I ask where is the link of the cloud storage? because my laptop can't meet the requirements. HAHAHAHAH

@M-VAVE 4 ай бұрын

Just share it with us

@worshipg 4 ай бұрын

@@M-VAVE How can I share it?

@profEdison 4 ай бұрын

@@M-VAVEhow to send the archive?

@M-VAVE 4 ай бұрын

@@profEdison Upload to your own cloud storage and share the link with me

@M-VAVE 4 ай бұрын

@@worshipg Upload to your own cloud storage and share the link with me

@danielastudillo88 4 ай бұрын

hi, mega don´t allow me to download withput paying, do you have any other link available?

@M-VAVE 4 ай бұрын

Not yet,You can contact me on Facebook (M-VAVE Zhang)

@filipeadriano8056 4 ай бұрын

you can use VPN when the limit is over

@leonelguitarra 4 ай бұрын

Coloca via web transfer pelo mega não tá indo.

@M-VAVE 4 ай бұрын

Can't download?

@eltoLeon 4 ай бұрын

Para min está normal.

@filipeadriano8056 4 ай бұрын

liga a VPN quando acabar o limite

4 ай бұрын

MegaUpload Link doesn't work Mate !!!!!!!!!😛😛😛

@M-VAVE 4 ай бұрын

You can contact me on Facebook (M-VAVE Zhang)

@luisnegrao4948 4 ай бұрын

When I click on "train" the prompt window appears, but the process does not start and then suddenly the prompt window closes 😢 What can I do?

@M-VAVE 4 ай бұрын

Is your file named correctly, without any spaces, and a separate file name corresponds to a folder

@luisnegrao4948 4 ай бұрын

@@M-VAVE Hi! Yes, the name of the wave file does not haver any space, and the folder has the same name of the wave file.

@DoubleDguitar 4 ай бұрын

I made two profiles successfully, then this started to happen to me.

@luisnegrao4948 4 ай бұрын

@@DoubleDguitar I solved this by creating the folder on the root of my D: disk.

@DoubleDguitar 4 ай бұрын

@@luisnegrao4948 I just fixed it by creating a new folder, as well. I have to say, this is really cool. It takes a while with my slow computer, but it’s really great they gave us the access to the software.