As always, very informative sir. You deserve all the credits for sharing your knowledge and expertise to everyone. God bless you sir and thanks a lot.

Sana ganito pagka explain ng konsepto sa school . Galing nyo po 💯

16 years structural fabricator welder ako base on my experience laging ang engineer ang sablay s mga structural design mostly kc theory lng s knila madalas ung design nla nirerevise p pagdating s fabrication

just for info, i have a house of up and down with 6 rooms were made of steel structure(H beam) for post and beam. I happened to be working in an construction engineering firm. so i got a lot of help from my fellow engineer for the design and construction. The result was cheaper and fast construction(less curing time for cement). You are correct, if the project is just a small scale project, It is cheaper than RCC.

Still watching 2023 .. napaka galing mag paliwanag nito aba.🔥🔥 Napaka linaw sobrang galing.. nakakabilib si sir. 👏👏👏

Depende iyan sa design ng structure at anong klaseng structure ang itatayo at anon purpose ng structure na itatayo at tapos susunod ang costing ng materials ang gagamitin, hindi puede tipirin àng designed structure dapat laging isaalang alang ang safety ng mangangagawa at at integrity ng structure pag tapos na ang project, responsibilidad ng lahat ng gumawa ng structure ang safety at integrity ng project. BAWAL ANG PATAMA SA TRABAHO. GUMAWA NG TAMA AT HUWAG MAGPATAMA, BAGUHIN NYO UGALI NG MGA PILIPINO MANGAGAWA AT TANGALIN ANG UGALING PATAMA SA TRABAHO, KAHIT ANONG GANDA NG DESIGN PAG ANG TRABAHO AY SINAMAHAN NG PATAMA SIGURADO, MAHINA ANG PAGKAGAWA NG STRUCTURE NA IYAN, PATAMA HABITS DESTROY THE QUALITY AND INTEGRITY OF WORKMANSHIP.

He got a professor vibe but not boring, Nakakaaliw din yung editing skills, keep it up engr.

Hi sir Donald thanks po..sa mga impt. Info mo so clear and distinc ang explanation mo ..at salamat sa payo regarding sa tamang water proofing na gagamitin sa walls at roofdecks. ..May the Lord bless you and guide your thought amd your profession as engineer..proud kami saiyo..MABUHAY PO.....!! AND PRAISE GOD..

Napakagaling mo engr. Mag paliwanag kahit walang knowledge sa construction naiintindihan sa tao

Thank you po..ang galing nyo mag explain

Maganda kayo magpaliwanag sir.. Marami ako natutunan.. Klaro at isa isa nyo pinapaliwanag.. 👍🏿👍🏿👍🏿

Thank you for a very clear explanation bet the two! Good job sir👏

i learned many things today and reinforced my previous construction observations around . Thank you sir

Okay po ang discussion na ito and very clear and informative. I think kulang lang sa details ng pinagka-iba sa strength. Totoo na mas mataas and tensile strength ng steel beams/columns pero mas mataas naman ang compressive strength ng concrete compared sa steel kaya ito din ang ginagamit na foundation. Pwedeng mag buckling and bending ang steel kung masyadong mabigat ang load.

Engr. As always very informative po ang vlogs niyo. Ang ganda rin ng editing at angles niyo habang nagpi-present, Very professional na po. God Bless and more vlogs to come.

Ito dapat na mga bloger ang sinusoportahan,, yung wlang alam sa bahay concrete meron ka matutunan. Salamat sa ediya sir,, thumbs up 👍

Informative Yung topic mo.sir, kahit Hindi related sa engineering course /job ko, Ang Dali lang intindihin. Great help for my plans of house renovation.

Well said Engr., I'm supposed to ask about the fiber concrete, good thing you have, thanks a lot!

Dto sa amin sa benguet, marami n rin gumagamit steel framing kaso mostly walang plano at supervision ng experienced engineer. Critical lalo pag steel columnd and beams ay sa joints. Kgandahan pa sa steel is pwede iprefabricate offsite tapos dugtong by bolts at minimal welding onsite

Ang ganda Ng discussion mo engineer step by step talaga sa pag explain...

Grabe complete details...marami pong matutunan sa channel mo sir.

Ang galing mo sir mag paliwanag sir lalo ako gomaling sa work ko bilang isang foreman mabuhay poh kayo Gd blessed salamat sa mga paliwanag mo sir

I learned a lot.Engr...precise nd accurate explanations.

Ang galing ng format mo sa video, Sir. Inexplain mo kng ano ang difference between the two, its cost and benefits if we choose one over the other taking into consideration yung purpose ng bawat isa at san sya best gamitin and gave your advice in a clear and concise manner.

Very impormative ang pag kakapaliwanag.mabuhay ka ENGR..

Well said sir! Iba talaga mag explain ang mga experienced professionals 👍😁

Nahilo na ako sa pagaaral nahilo pako sa video 😁😁😁💪💪 pero still marami po ako natutunan thanks a lots 🙏

Very good comparison. Salamat sa very useful info.

Very good explanation, Sir. Madaling maintindihan. God bless po! More views and subscribers to come.

Maraming salamat!! Malaking tulong yung pag share nyo ng knowledge, at least alam ko na ang difference ng dalawa. Maraming salamat engr!!

Maraming salamat sa informative content..God bless din po..

Lupet nyo sir mag discuss sobrang naiintindihan tlg ng manonood Godbless

Salamat po sa Dios may bago ako nalaman syo engr.

Gawa po kayo video about building house properly that can withstand storms like Odette. Kung kakalimutan ang beauty, ano ang pinaka matibay na gawa na pader at bubong na hindi magigiba ng up to 200kph na winds.

Salamat ingeniero tv sa mga tips.

Thank you for the info Engineer!,very well explained !Nagets ko agad yung differences nung RCC at SFS kahit na Mechanical Engineering yung field of study ko.

Present as always!! Very informative ,👷

Nice explanation Engineer and absolutely agreed with your technical inputs and ideas. Like you, I am an engineer too but already retired. I just may want to add that for steel framed structure may require lifting equipment which has a very high rental cost which should avoid idle time as much as possible.👍😊✌️

Slamat po madami Po ko nalaman godbless po 🙏 lgi Po ko manood pra mas madami pko n mlaman. Pray ko po n magkaroon dn po kmi Ng sariling huz n ipatayo🙏🥰

Very informative sir, excited na po tuloy ako sa ipapagawa kong apartment. Thank you po ☺️

Hi sir, yung bilis ng pag gawa sir cguro is base sa kung papano gagawin ang isang proyekto. sa iyong palagay at sa iyong experience, mas mabilis ang RCC. Share ko lang din po, na base nama sa experienced ko mas mabilis ang steel structure for the following reasons. 1. Once na meron na po tayong for construction drawing, pwede na po tayo mag purchase ng structural steel member. 2. Habang naghuhukay po tayo ng pundasyon, pwede na natin isabay ang fabrication ng mga steel frames since offsite naman sya gagawin. 3. Once cured na ang pedestal, it takes only an hour or two at maitatayo na natin ang steel columns using mobile or tower crane whereas kung RCC column, bago tayo makabuhos kelangan natin atleast 2 day ( pinakamabilis ) . 1 day for rebar erection including stirrups , 1 day for column forms including shoring and allignment. Same as through with beams. If RCC beam, lalo na kung malalaki ang beam, need natin muna prepare ang base para sa shoring bago pa tayo makapaglagay ng scaffolding, bottom forms and rebars. If Steel, oras lang din po, ok na. 4. isa pa din po factor kaya mabagal ang RCC is yung sinasabi mo na QC.., since marami tayo kelangan check sa RCC, like spacing of stirrups, concrete cover, vertical allignment , etc..nakaka affect din po sa schedule., whereas kung steel, once ok ang materials, only welding ang need na test.

Napaka husay ng pagpapaliwanag at madaling intindihin. Walang masyadong salita at straight to the point. Salamat Eng. 🥰

Maraming salamat engineer...very satisfying.

Subrang linaw at simply ng pagkaka explained. Kung ganito sana ang mga instructor baka lahat gagraduate ng may excellent grade.

May mas naintindihan pa ako sayo Kaysa sa professor ko! Hope you make more videos pa. God Bless

Salamat sa lesson dami kong natutunan.😊😊

Napaka liwanag at sobrang informative sir. Salamat po

Wow! Very very perfectly explained! I salute you sir! Thank you for sharing ur knowledge. God bless you 👍🏾👍🏾👍🏾

Para po sa tulad ko n walng gaanong alam sa construction..magaling po kayo mg explain sir. Salamat po sa info

Buti pa kayo sir hindi madamot sa kaalaman ibinabahagi mo ito sa iba napakahalaga nito lalo na sa mga may kakaunti lamang ang kalaman sa linya na ito isa po akong electrician subalit wala pa akong nakita ng EE na may ganito ka detalye kung mag share ng knowledge mabuhay ka sir

Salamat po Engineer. Very informative po ang content niyo.

Galing mong mag explained Engineer. Thanks for sharing. God bless!🙏🙏

Watching from Colorado USA; Thank you so much Engr for such informative vid; mas kampante na ako magpagawa ng retirement bahay ko dyan sa Pinas, Maraming salamat and pls keep sharing your ideas

As an engineering student. This is very informative and useful sa aming career sir. Thank you po!! Kudos and God bless :)

ang galing :) simpleng pag papaliwanag madaling intindihin yung pros at cons dalawang bagay.

Napaka impormative sir God bless sir 😊

thank you youtube for this recommendation, im a teenager who have a dream of having my own house. this video is very informative, thank you ingeniero ph.

Hi Engineer, bka pwede nyo po discuss about Tempered Glass Wall/Partition. Tulad nung mga walls ng house ni Slater. magkano kaya to? and ano ung Pros and Cons? and gaano kainit to compared sa Drywall and Concrete?

ang galing mo mag explain sir! salamat!❤️

Salamat Engineer sa mga info... more power... Godbless

Malinaw at Detalyado sir ! Keep it up malaking tulong at dagdag knowledge para saaming ordinaryong mamamayan 🤟😊

Para sa akin, mas applicable ang steel frame, dahil malindol sa Pinas at laban sa anay, bukbok at sunog, bagyo. Sa RCC, malaki chansa na mag crack ang walls o poste kung may lindol at settling ng foundation during rainy seasons due to expansion and contraction in wet and dry season sa Pinas. Kung one or two storey houses ay pwede rin ang metal framing using 2x4 preformed GI prepunched hole for electrical and plumbing purposes. Easy to cut, using rotary metal cutters. Easy to install using bullet nailing. Yun ang sa akin opinyon.

Sir, SALAMAT s detalyadong paliwanag mo..

Solid Ka Neer! salamat sa pagbabahagi ng kaalaman at skills Mo ❤️

Mas magaling pa kayo mag Explain kesa sa mga naging Teacher ko sir

Problema p s steel structural kailan mo ng magandang access s chain block at lever block. At kung malalaking steel structural ung install mo kailangan mo ng heavy lifting equipment. Gaya ng Crane at lorry crane. Gusto mo ung mga bolting ay matibay. Kailan mo pneumatic or air impact wrench or hydraulic bolt tensioner. Hindi maganda kung manual tensioning s mga bolting ng steel structural. kasing s mga vibration madaling luluwag ung mga bolt. kaya lng kailangan din ma-ingat kung gagamit kau ng pneumatic or air impact wrench or hydraulic bolt tensioner. May tendency matutol ung bolt. Bases lng po s experience s oil and gas industry

Salamat po sa malinaw na impormasyon.

Salamat sa information mo... big help ang mga explanation mo.

Galing mo Engineer.Spontaneous lahat explanation mo parang hindi ka na halos humihinga pag nagexplain ka.It only showed you know what you were doing .Congrats !!!!

Very informative and helpful for us newly Civil Engineers. Please continue this kind of content.. 👌👌

The best explaination madaling intindihin.

Thanks.... Dagdag kaalaman. God bless

Steel frame can accept vibration very well,Concrete will not corrode,So application depend on purpose,Both materials has their own unique properties.Selection is engineering so you need arithmetic not sun glasses.

Good job 👍Bro. Retired structural engineer here from Armed Forces. Now 60yo and living the good life here sa USA 🇺🇸 and helping business owners na lang with their website as a hobby for FREE ♥️

Ang linaw ng paliwanag. Salamat po.

Marami nnmn akong dagdag kaalaman sa construction

Am taking up engineering n Europe and all your vids helps alot to understand construction even more! Very informational! 👷🏼‍♀

Sir, your explanation is very good and clear. I watch a lot on KZfaq but i only commented on your video. In presenting your explanation, it seems to me that your really are a good and kind engineer! sir, i want to say more or comment's but I'm sleepy from night shift. sir, i hope it's a coincidence that i can work with you. More power more subscribers God blesses po!

ang husay mag paliwanag..salamat engineer

God bless po engener, 🙏ang linaw ng pagka explain niyo sana marami pa kayong video na ma I upload upang sa gnon marami kming mtutunan sa mga tulad naming mga construction worker...👍💪💪💪🙏🙏🙏❤

salamat sa impormasyon engineer, sana sa sunod malaman ko din kung saan makakatipid , concrete flooring na bubong or yero na bubong thanks and god bless

Mas maganda steel frame pag malaking project, pero kung mga normal size house, mga bunggalow mas tipid ang RCC

Napaganda at napakalinaw idol.. Salamat idol..

Ok gusto ko ung topic na to,very informative.

Add ko lang din Engineer. hehehe. in my exp naman mas madali mag structural analysis ng steel kesa sa rcc. mas maraming I-sections na pagpipilian na mag fifit sa architectural design naman ni architect.

We are planning to add a second floor to an old house. The preference is steel frame so that we will need less retrofit to the old structure.

salamat po sa mga advise regarding sa construction materials

Very good, straight to the point

Engr. Salamat sa mga video mo at sa dami ng natutunan ko. Im keeping your earlier vids as reference later for our dream bungalow build while my husband is oversea. Mas confident n akong magmanage ng construction later kahit may foreman at engr kami. Mabuhay po kayo!

Very clear & detailed explanation. Thank you so much Engineer, I've learned a lot. Keep it up po & more power sa channel nyo. :)

Thanks poh sa mga new kaalaman..😊

ok malinaw paliwanag mo sir.. thnks sa information

Salamat, engineer!

Steel Frame should be applied with Fire Proofing because during fire the safey of the occupants is a big issue If there is a fire the steel members will easilý melt.

Maraming salamat for sharing your knowledge 🙏🏻God bless

Galing talaga nang Engineer nato magpaliwanag,Thank you Engr.

Very detailed yong mga information and its obvious he is an expert on this. God Bless sir

For me,steel is the best when it comes to building the skeleton of a construction,very conventional approach. Doesn't takes a lot of downtime and very stable.

Slamat sa mga dagdag kaalaman sir😇 about construction 😇

very informative and specific engr. i moved here in canada and medyo nahhirapan ako sa residential conctruction practices nila dahil puro timber. i hope you can create video in the future if may background ka sir. more power po. God bless you