www.anrkydexholsters.com/prod...
Scatter Gat Trap & Sling - Shotgun Retention System is a total system for retaining the shotgun weapon system on the breacher for infil, as well as, on target. The Scatter Gat Trap & Sling - Shotgun Retention System is a two part system, consisting of a combination elastic-nylon bungee sling, and a magnetized bi-fold retention system for the shotgun.
The shotgun sling has an integral section of accordion elastic, shrouded by nylon webbing, ending in 1″ webbing tail with an attached QD. The 1″ nylon webbing is purposely long so the end user can set the desired length on the QD, and cut away the excess 1″ nylon webbing. The accordion elastic section has roughly 6-8 inches of stretch. This allows the breacher to have the Scatter Gat Trap Molle mounted to the cummerbund of the plate carrier, and the grip of the shotgun tighter into the armpit/under the arm, and still allow the breacher to stretch the sling and shotgun into the appropriate position for forced entry.
The Scatter Gat Trap is a bi-fold styled shotgun retention system that physically retains the shotgun with two folds of Squadron material, bonded nylon, with a 1″ nylon webbing strap with adjustable length of pull, ending in a G-Hook. The G-Hook clasps into a loop in the Squadron trap, and can be pulled tight to retain the weapon during infil; jumping, inverted rappelling, under duress movement. Once on target, the breacher can loosen the webbing, one handed, and open the trap, exposing the shotgun. The Scatter Gat Trap has a central magnet in a magnet pouch. Once loose, the breacher can stow the loose webbing by sticking it to the magnet on the back side of the exposed Scatter Gat Trap. The shotgun is now retained to the body by a 2″ Diameter & 1/4″ thick, 50lb load magnet (note* squadron material creates a buffer between shotgun and magnet, magnetic force is in fact less than 50lb. The pouch is capable of fitting a 3/8″ thick magnet for the need of increased magnetization). The breacher can now do their duties, and quickly stick the shotgun system, by receiver or barrel assembly, to the magnet after success breach of door or structure has been accomplished; transitioning to a primary rifle. The breacher can one-handedly secure the shotgun in the Scatter Gat Trap, post breach, into the bi-fold Squadron and with the G-Hook. (The Scatter Gat Trap and handle 2″ Diameter, and 3/8″ thick magnets as well).
For more ANR Design Soldier Systems Equipment, follow this link!
www.anrkydexholsters.com/sold...
If you like what you see, please check out other ANR Media by following the link below!
linktr.ee/ANRDESIGNLLC
Here you can find the ANR Design Website, KZfaq, Facebook Business Page, Twitter, and Twitch Accounts!
Podcast Streaming!
Amazon Music
music.amazon.com/podcasts/7b3...
Spotify
open.spotify.com/show/1AKResN...
Google
podcasts.google.com/feed/aHR0...
Apple
podcasts.apple.com/us/podcast...