I reckon once you open up the plenum it will run smoother and under less stress 👌 Buy awesome progress boys and great shooting 👍

Another Great video guys👍🏼

Awesome video definitely improvement 👌thanks for sharing 👍

Really nice shooting there and even though it’s slightly better, everything helps 😁. Keep up the good work.

Excellent Jake, another very interesting vid and great attention to detail, I can see your going to be up there next comp, Geoff had better get his finger out as so should we all

That's really interesting and great to see it quantified. A while ago I noticed a shift in POI with my HW100KT which I traced to the barrel band putting a downward pressure on the top of the barrel. When using a Bipod the extra pressure from the clamp on the Sling Stud stick screw had caused the bottom of the barrel band to bed progressively further in to the stock causing the shift. Any change to the pressure underneath the gun was transferring up to the barrel and sometimes causing the POI shift, although it was mostly only noticeable when putting away and taking out again. Currently I'm using a Rowan Engineering Floating Barrel Band to negate interference to the barrel and I have cut a thin metal (Beer can) spreader plate to sandwich between barrel and stock which is easy to add to if required to relieve pressure from the band on to the air cylinder. I think of I was going to try another band I would want to experiment with perhaps some method of bolting in both axis so I could adjust alignment and fix in position, perhaps in a similar way to the Sabre TRS Delrin shroud clamp 🤔 Thanks again 🙏👍

nice shooting tex 😄

Thanks Jeff, I found that very interesting.

Another great video boys. And great shooting Jake. Hope mine improves with the band👍

You will be please to know that as long as the marker is touching the blue line, ie no white showing between the two circles it counts as the higher score so definitely a 250. The scoring pin you are using is fine for this testing and practicing but they have been updated now and the newer design with no magnifier, is the official scoring pin. Great video, keep up the good videos

so very interesting indeed . i would say definitely an improvement for sure. as you say also you have to take into account your not fully used to that rifle yet

Brilliant stuff jake , it's good to see the improvements on each video you're doing. Apparently if you float the cylinder as well as the barrel on the underside of the block towards the front there's a long grub screw , if you change it to a shorter one you can put another stock screw in it that stabilises the action in the stock, I believe this is common place for the bench rest boys. 👍

Hi great videos always from you, but can I ask, is your name Geoff, Jeff or Jake 🙂

Hi ya so I'm confused generally speaking iyo is a barrel band better to have or not. I've seen lots of people go from a free floating set up to a fixed setup

👌👌👌👌😁😁

Hi, Geoff, what pellet did you use in those test? Cheers

Do you still sale the plugs for the edgun lesilye 2 on. Ebaly thanks dave chubb

Need to use a .22a gauge for correct marking

Shots 5, 8, 22, 23 ? Plugged using inward gauging ? Domed always leave tear marks and not the true hole size or centre, unlike wadcutter characteristics. Looks good for a 249. What went wrong with 1 shot Jake, heheheeee

Touching the line is enough, you dojt have to break it 👍

May....that from barrels it brand new guns, more shot more accurate 🙏🏼

Tooop

😁