very complete tutorial, thank you!

I love explicit videos. Keep it up.

amazing video ..... and great presentation... !!!

Thank you very much! well explained!

great video presentation. thanks.

Awesome video! Thank you!

It really helps a lot !!! Thank you for all the effort you've done to this tutorial.

Thank you very much for this tutorial

thank for you, you are good teacher!!!

0:00 Intro 0:48 Explanation 3:20 Engineering Data 4:30 Geometry 7:20 Model 9:08 Assigning materials 9:25 Connections 10:42 Mesh (Details with use of cores) 12:00 Explicit Dynamics : Initial Conditions 13:30 Solution 15:07 Damage

You're amazing! Thanks heaps!

awesome video🔥🔥🔥🔥

Thank you for sharing this :)

Great video. Thanka for posting this video

Many Thanks!

Hey DrDalyo these videos are great and you really helped me to learn ANSYS Thank You so much

this is so helpful thank u

very informative and clear for a beginner like me to learn. Thank you

👍🏻👍🏻 Very Impressive

Thank you! you really save my life!

You're the best

thank you so much

+DrDalyO thanks a lot for the video, I am eagerly waiting for your waiting on the analysis of RC Beam in Static structural. In that video can you please explain how to create bond between steel and concrete, and how to input compressive strength of concrete from lab to be included in the concrete material thats' going to used in the analysis.

thanks for the very informative video, please keep uploading more videos, you gave a long break, for example bird strike with ls dyna would be very beneficial

thanks for your video

Sir, it is very useful and Informative..Kindly send more detailed video in solution set up.

thanks a lot

@DrDalyO: Thank you so much for this video. Its greatly helpful. Hey, I have a question though, can I change the velocity to 125 m/s and run the analysis. Is there any other changes that I should be doing other than changing the velocity? I reduced the velocity and ran the analysis, its giving some weird results.

+DrDalyO We here at university really learn alot from you. Specially the small small points u clarified during tutorials. Thanks. Great work

Our technology can dramatically improve the efficacy of Ansys's output where multi-phase multi-scale materials like concrete are involved.

Hello there! Your video has been really helpful for me and I have a question. Will the reinforcement setting work for a geometry which was created in Solidworks or does it need to be a line body? I am working on a model of a unit cell made of epoxy reinforced with graphene sheets. Thank you in advance.

These video are great and I need a analysis of shearwall in ansys

super!

thank you for the video. Can you do a video on elastic wave propagation in pipe or plate in Explicit Dynamics, that would be very helpful as there is no video available on this topic in Ansys workbench

Thank you for making one of the few tutorials on damage/explicit modeling in ANSYS. I have a questions though: Do I need to use explicit solver for a tensile failure, too? If yes, how should I define the failure in Ansys? (in abaqus, there are many different ways that I could not find equivalent ones for them in Ansys) I don't see there is any other way to delete element in the mechanical solver. Is it possible for you to make a tutorial on the failure/fracture of the materials? This is I believe one thing we need the most on KZfaq.

owl good tutorial! I just think the loading speed is a little bit high thus the deformation in midspan is relatively huge than prediction

Thank you Mr Dalyo, that was really impressive for your didatic skills. If I want to simulate a breaking of something like a PCB, should I use explicit dynamics or statics structural? Because the load is applied slowly, but in static structural I get only infinite deformation. Thanks.

It's really good example.I am want some example of nonlinear design of masonry building.

hello Daylo, Good information on explict dynamics. Could you please tell me how to add new materials like kevlar and other composite materials

This is really helpful. I have question tho. When it comes to adjust to visible, why does the results are changed when we activate 'adjust to visible'? I found out that numbers next to color distribution bar are changed. I'd really appreciate if you could explain it to me.

Hello DrDalyo. Great video, easy to understand. I like it. Thanks for sharing. Would you mind to share video on composites material like e-glass fibre laminated with epoxy resin or similar. Would be great if we can show the stress analysis or deformation if any.

Great explanation, however I have been trying to download the geometry file, but it was not possible. Can you upload it once again?

If in place of velocity I use displacement for compression of hollow tube along it's axis what steps do I have to follow. Plz recommende static structural or explicit vl be best for it.

Thanks for sharing this important topic, this resolve some issue related to RC beam. but I perform the same step but didn`t getting the same deformation in steel bar...and Sir I want to solve the one problem that is some kind of interaction between 2 solid body and which is in contact with each other some interface that interface is having some material properties.. can you highlight some guidance on this.. thanks.......

Hi sir, Thanks a lot for this tutorial, I'm doing a drop test on concrete specimen, can u plz tell me how to find No. Of steps taken for first crack and final crack,.. please guide me.. Thank you

DrDalyO is a very cool video, you are the best, thank you very much. I try to repeat in version 2020 R2, but it does not work, because does not switch to beam mode. By right-clicking on the geometry from the option to replace the geometry, only "browse" is offered. You have an opportunity to prompt how to set the beam mode. Thank you in advance.

Dear DrDalyO, Many thanks for your helpful tutorials, i did a model from scratch but it is saying that i need almost 300 hrs to solve it with the same configuration you did in here. ive downloaded your model from here and it was 6 minutes only, do you have any idea where did i get it wrong or how to enhance the analysis timings. (BTW I dont have any warning messages) Thank you in Advance for your great help

Very nice clip. But can you tell please, how can i introduce and analyze deformed rebar in RCC beams????

Dear Dr. Dalyo, I am new to ANSYS Workbench software and I will like to have clarity on the concrete code. In the static structure, are the stress and strain data constant?

Please add a video for non-linear buckling analysis of RCC beam....!

How did you select velocity of 8000mm/s if we want to do for other materials how do you select the velocity for that material

Thank you for this tutorial! But my problem is, how can I determine the max displacement and max loading that the beam can carry before its failure? Because this video didn't cover this kind of problem. Please, if there's anyone who can help me with this problem, it would be much appreciated!

sir your tutorials are very useful.can I get the PDf please?

where i can find in ANSYS Workbench elements known from APDL like RBE2 or RBE3? I would be very grateful for showing/writing the path to find it :) best regards

very nice video i want to make a strain gauge like geometry can you have some video

Which is better to use ansys workbench or ansys apdl for composite steel beam with slab reinforcment concrete under fatigue dynamic loads thanks

plz make a video on how to draw a stirrups in static structural claerly explain this

Can you clear me about end time step and initial velocity relation.

Thanx sir for posting this video. I have one doubt. When i am checking the stresses in the deformed reinforcement its showing zero throughout the length. Please tell me i am doing wrong.

o It's Amazing video Thank you for a wonderful video but I have small question. How to Draw a reinforcement like stirrups reinforcement in concrete beams? Thanks

it is very helpful ,,sir please send me tutorial which how to make reinforced beam column joint

+DrDalyO can you make video on retrofitting of column (or beam) Im not sure if it can be done in workbench or if it has to be done in mechanical APDL

Hi can you show us how we can do the simuliation of the bond b/w concrete and steel reiforcing

Hi, I want to know how to simulate true stress strain in engineering data

Does the punch stop eventually? In my computation it moves uniformly till the end of computation as if it's infinitely massive. But I want to check if beam will break or not. OK, I found it i needed velocity in INITIAL CONDITIONS.

What is the link between steel and concrete? Can you help me? I'm in need. Thank you very much

is it possible to do a repeated impact analysis using explicit, if yes how we can take the affect in picture after each impact

can you show how to do beam column joint non linear analysis?

at 15:07 from model we can see maximum total deformation is 1.1971 mm but in graph it shows total deformation value is 18.366 mm at time 5.0003e-3. How could we conform about maximum total deformation? Please help me to understand. Thank you

1. How can I define the yield strength of structural steel? 2. How can I draw stirrup with different diameter with main rebar? The program always make them be one line (with the same diameter)? Thank you

How can we use explicit dynamics to moniter the trajectory of a projectile under water

Hello sir, I have a question following this video. I drew the line and create the cross-section in the geometry (SpaceClaim) as reinforcement in the beam, but the result show that those lines are not connected with each other. So can you tell me how to connect those lines (Stirrup in geometry) together? I couldn't figure it out but to ask you for help, please!

DearDr Please tell me how to use explicit dynamic for solving static cases, what are the required settings for this case? By other meaning if I have RC beam and I deifne the materials in explicit dynamic as built in concrete in explicit module like Conc 35 Pa and NL steel and the beam exposed to static loads, please tell me how to use explicit dynamic solver to solve this case, thanks

Sir, how long it tooks to get the overall result of analysis ?

wouldn't a perfect plastic material static structural model make more sense for limit state design of a brittle material?

can you please add the CFRP sheet affect in addition to the reinforcement bars .. I really looked up for this in KZfaq .. all are using ansys APDL for this issue .. I need to do a project and I have already installed ansys WB on my laptop.. I really appreciate your help

how to find reaction force in explicit dynamics?

hey very helpful video ...I am working on some other geometry ...I want to export my results to LS DYNA code in ANSYS ...n see the simulations there in DyNA how to export that

Hi, DrDalyo, this is very promising video on Reinforced Concrete beam Problem. Do you have any idea how to construct the concrete beam with homogeneous material without using link 8 element in ANSYS. The rebars material need to be added without using Link8 elements, As per the description of ANSYS help in solid65 element model we can add three rebars materials. I need to simulate the rebars without using Link8 element, Can you help with this problem

Thanks a lot for the videos!! I'd like to ask if anyone has similar experience with me; I was following this video step by step, but my energy summary is nowhere similar with DrDalyO's but then I noticed mine has 10200 cycles and his has 320 cycles..

hello, can we simulate the blast load acting on the face of the column?

how to apply element orientation command in explicit dynamics of ansys

How can I input commands for solid 65 and link 180 elements to concrete and rebars respectively in ansys explicit dynamics? Like, in static structural, we can do insert > command for the geometries.

how to convert the concrete material from ansys(solid 65) or ls-dyna or ansys autodyn to workbench

can you make a video about how to find the end time

I tried to do like that test but I couldn't it. I think the reason of the failing is that I want to assign orthotropic material to the solid body but I don't know how to set the analysis settings of the explicit when I use like that type material. If you know that, please type me. Thank you so much.

Can you please explain something about the solver control, I cannot a sense even in a single parameter in ssolver controls.

I created my own geometry myself in inventor, then I imported it to the Ansys. but in the connection -> Body interaction I couldn't choose reinforcement type? what's wrong.

problems In the process of build the model for the analysis of the static , I did not succeed in a new bonding process between concrete and reinforcement , Although the use of the Command method in the code, the same problem was encountered in the analysis of Dynamic Transit But the fatigue did not work for me and I did not know the use where there is an icon but when choosing the whole model shows a line while when choosing the steel beam Appear result but how to verify it I use ansys 18.2 which is better analysis dynamic transient structure or explicit dynamics

hi,can u provide a ball bearing analysis in ANSYS workbench with lubrication.

Can you please help me with generating crack for 3 point loading beam case using polypropylene concrete

request to upload slab design of slab with deflection graph

can you design ANSYS Reinforced Concrete Column (RC Column) - for linear Buckling

I modelled my reinforcements in spaceclaim as solids but I'm unable to create a body interaction for the reinforcement. If I select other types like frictionless, bonded and frictional. That will work. Only reinforcement is unable to work. What do I do please.

can this method be used to determine cracks in rcc structures?

How pin support will added in a beam at some distance of edge of beam....plz say

PLEASE UPLOAD VIDEO ON BULLET PENETRATION IN AUTODYNE.

Hi. Can we apply transient thermal + explicit dynamic?

I wonder if you could please make a video on a steel connection, which include all typical elements such as bolts, welds, plate, supporting and supported member ?

DrDalyo thank you for the video. I'm not able to download the geometry file you've attached. The link in the description is taking me to some advertising website can you please check it once.