Update on the inteference issue: With the firmware version 2.2.4 Antelope addressed the issue and changed the PWM frequency of the LCD backlight. This eliminates nearly all inteference in the audible range by shifting it above the human hearing range.

You sir are the best. I watched a few other reviews of this interface; yours is head and shoulders above the rest. Thank you (as always) for your attention to detail.

This review, like all of your reviews, is excellent! So sharp, so detailed, so insightful. I can't believe you even found the root cause of the LCD interference bug. I wish there was a review made by you for every piece of audio hardware in the world so that I didn't have to watch anything else but your reviews.

Glad I found your channel for my interface needs. Best review as always. But so much temptation every new episode! haha

Great to see you're getting some folk backing you in these things, they've guided me to and away from a few purchases already. Hope to see you spread out to other audio-stuff too down the line.

Thank you once again my friend. Great job as always. Greetings from Greece!

Wieder mal ein super Review - ist man von dir ja gewohnt...

New background looking good, Julian!

Great review Julian. Would love to see you have a sister channel for plugin reviews. Your impartiality is great to see as practically every other reviewer is being rewarded directly or indirectly for their opinions, which skews the reviews and leaves the consumer none the wiser.

Best review ever I could find. Thank you so much Julian. love your work. 👍👍

Welcome back!!

Apogee Symphony Desktop will be great to review! Unbiased and informative reviews. Great Channel!!

Thanks julian. Always the best reviews.

Great reviews as always....Really like that you do these reviews with windows too. Get to see how the driver support is. Wonder if there will be and RME device in your future

Just what everyone wanted to see. Julian reads our minds again).

Julian, these reviews are the best and most comprehensive i have found. I will now retreat to my room and go back through all your videos. Much to my wifes disgust. You sir are awesome.🤜

Nice job Julian, like always👍

Final score: Julian Krause 1 - Warranty sticker 0 😂

As always...Julian, you make the most complete reviews in the world

This is by far the best review I have seen. Great level of tech detail and communicated so I understand it 🥸

Nice video!! Keep up with the good work.

Great review! Congrats!

Excellent job Julian! You recommended the Audient ID14 MKII in a past video where I asked for your opinion, I look forward to your review on it so I can buy it. It is finally available in Brazil.

Solid video as always!

Julian it's great to see real world 'fact based' comparisons like yours. Highly professional. Would love to see you review Antelopes Zen Tour Synergy Core in same manner, they make some big claims👍

Thanks for the review! I’d be curious to see you review the Audient iD4 MkII with the updated converters!

i never comment on the patreon, i'm more a YT guy. but man, become a patreon is just a must when your content is THIS GOOD ! Keep the good work Julian!

There's comedians that talk about the German sense of humor, or lack there of, but I will tell you that I literally laughed out loud by the dry humor of you cutting that warning tag with the utility knife after saying, "there's no way to get into the device", hysterical!! Perfect timing..every time I watch it it makes me laugh. thanks!!

I'm really enjoying these Audio Interface reviews. Great job, Julian! You know there is gonna be one question that many people have, right? Yep...which one is best? I know the answer is probably "It depends......." but I'd love to see a video where you make a final conclusion and recommendation. Maybe there is one and I just haven't watched it yet........ :)

Another great review.

I really like how your voice sounds through that BurrBrown and mic preamp. Smooth.

super in depth review thank you

Thank you, you are the god of reviews!

Love it high appreciated, thanks 👌

Great review, very interesting with the dynamic range and noise floor! PLEASE can you do one of the Antelope Discrete interfaces. The pre amps are component based and are supposed to be like console preamps. Very interested to see how it performs. Thank you.

Great review 😎

Danke sehr für deine Videos

Love from Bangladesh Bro.... Always great review

Superb video. Very detailed and well executed! Wondering how well the Audiofuse studio and UA twin x hold up in these comparative charts and samples. Cheers!

Thanks for the work you are doing Julian. May I make a couple of requests for your future videos. There are a number of use cases where it is not necessary to tweak audio parameters of the interface. In particular in regards to interfaces with DSP features or digital external control. In order to avoid having to open an extra control program such interfaces would ideally boot to the last used settings ,which is one of the more useful attributes of the X Air series mixers. So it would be useful to highlight if such functionality exists with any particular interface during the review. Another thing that is frequently overlooked is the subject of USB-C connections Since the USB-C standard was created to unify various USB speeds and power supply standards there is a lot of noise made by manufacturers and non tech reviewers of the existence of a type C connector. Many assume the presence of a USB-C connector implies full type C speeds and power, which is contrary to the fact most USB-C connectors on audio interfaces are really only USB-2 complaint for speed and power. I note you have highlighted this on units with higher specs than USB-2 but again it might be useful to definitively indicate this in all your reviews. I acknowledge that USB-2 is plenty fast enough for low channel counts but I find it disingenuous of manufacturers taking liberties by omission in their promotional materials.

Very thorough as usual. Maybe look at the RME Adi2Pro next? Even though it's a convertor, I'm curious as to what your review of the headphone outs would be.

Great video Julian. I decided to get one and all is good so far. Cheers

Love your work J. Also love that you keep your testing method consistent unit to unit to end up with a big comparison table. Really hope you can check out the new Black Lion Revolution interface which is shipping now (in the states) for $399. They have been modding interfaces for a long time I'm very curious how their own interface will perform as it allegedly contains all of their mods already. Keep up the fantastic work. 👍

Julian ! you always make really good job ! thx it is very helpfull for all of us.keep doing it ! when it is possible i would like to know your oppinion about Black Lion interface ! thx again !

You are the best, love from Dominican Republic bro

Awesome! Thanks

Julian, as always, great video!! Thanks. Can you made one review for a RME babyface Pro FS? It will be fantastic!!!

Yes! Cool to have a confirmation of the headphone impedance of this one. I wrote to the Antelope Support and first they told me 120ohms, I asked are you sure and they respond 54ohm. I asked in the Facebook page and they told me 24 ohms. So I will go with the Motu m2 since my sundara cans have an impedance of 38ohms.

Hahahaha I literally laughed with the sticker thing.

I really enjoy your videos.. I'm curious on when you'll review the antelope audio zen q interface, please..

Nice Job!!

Definitely a great choice for live gigs with the snappy DSP but it really leaves me wishing more for home studio use given that Motu M4 delivers more value and audio quality at quarter of the price.

Those stickers which say "warranty void if removed" were found to be unenforceable and illegal in the US quite some time ago so I'm surprised any company would still bother using them.

Great Info

Danke!

I find your content excellent, thanks for taking the time to make the respective measurements and inform us about it, I would like to know if you can do a review of the new Antelope Zen Quadro? Greetings from Bogota- Colombia.

I’d love to see if you could review one newer Tascam audio interfaces (4x4 or 802i) as these support optical ADAT and I believe time-clock sync... & thanks for this useful Audient review!

That sticker part was great.

excelent!!! Great job!!! thanks!!!!!

Where have you been my Bro? Nice new setup.

Good work

I just got myself this interface for my birthday and I want to add a couple of things that I think are important. 1) you can drastically improve crosstalk measurements (and, I presume, performance) by changing the Panning Law to 0db. I tested it myself with RMAA looping the monitor out into the line in, and with the default settings I got -50.1db, with Panning Law set to 0, I got -100.9db. 2) Maybe the software update has fixed it, or maybe they fixed it in newer units, or maybe even your unit was defective (or I got an extremely good one) but in my case you don't need to max out the gain to drive Shure SM7b and the noise is much lower. In the software the gain maxes out at 65db, and speaking at around 5cm/2in from the grill I was averaging -8db with peaks approaching zero even on a relatively moderate voice level. 60db of gain is more than enough, I'd say even 55db is plenty. And I dunno how to measure EIN but to my ear the noise for me is lower than what is shown in the video. So if you are considering buying this interface keep that in mind.

Julian keeps it real🎵🎵🎵

Thanks, Julian for another comprehensive review. This is the first I am hearing of Antelope. So, thanks for that, too. I am researching microphones. Any chance you could review Antelope's "Edge Solo" (XLR) or the "Axino Synergy Core All-in-One Large Diaphragm USB Microphone"?

Was waiting for an Antelope or UA interface!

I’m very curious at the analysis of the Apogee Element 24 and the new Apogee Symphony Desktop compared to the rest of the field you’ve evaluated.

Man, that was super informative... I just need to know your thoughts and graphs on Apollo Solo (for Windows) and Arturia Audiofuse and then I’ll make my choice for the next interface

Great review Jay. I was taught the big difference with this kind of interfaces (from this Antelope to up the star of pro equipment) is the quality of the converters and as far as I know it's an audible thing. I wonder if there is an objective measurement related to this, in other words there are ways to actually put measures and numbers behind a "this is an interface with professional quality converters"? And which are these?

Отличный,честный обзор!По таблицам и сравнительным показателям сразу видны все плюсы и минусы данного дивайса.Особенно радует показ плат и конверторов АЦП-ЦАП,т.к. мало какой производитель раскрывает этот "секрет")))Все пишут "топовые конвектора" ... а всё-таки кто-то предпочитает AKM, а не Cirrus Logic или Burr Brown ...

Very good review. can you review the universal audio apollo twin X and the RME babtface pro FS ? Thaks

Thank you for this interesting video, it saves me from buying garbage.

Good spot on the screen brightness issue, same on my unit. I was only getting the buzz when using ZEN GO analog line output into my amp, S/PDIF output was ok. I actually thought it was my other computer connected to my Maia S2 amp and it was its USB DAC that was causing the interference (i have two computers connected to 1 amp driving passive speakers), but the brightness fix has stopped it :)

I hope you'd get to review the Audient iD14 mk2 next :D Keep up the good work Julian. 👍

Being forced to create an account is a deal breaker for me. Thanks for the reviews as always!

Thank you for this great review! Are you planning on doing an Apollo twin review too?

Hi Julian, Love your channel! Are you planning on doing a RME babyface pro FS review, perhaps? Thanks!

Great job bro 👍 very appreciate 🙏 thanks for telling the input dynamic range . That's why antelope didn't tell specs in official website

Excellent review and very helpful thanks. One question I have, is it possible to 'reamp' and use an external effects unit such as a Strymon big sky guitar pedal? Normally this requires an output 3 in addition to the normal Left and right outputs 1 and 2. Can the RCA or spdif outs be used for this purpose? Thanks in advance

3:45 Julian: "Once again I have cut a worthless warranty label" Another greatly in depth review! That Zen logo seems very similar to AMD's Zen logo hhmmm

hahaha when you went like " I really can't get passed this sticker " I went " hmm I mean yea it is kinda expensive you probably just want to return this. But then you opened it anyways hehe, awesome work man

The interference from the LCD is from PWM flickering! This is due to how many of the speciality display controllers handle brightness. It's very common in high refresh rate computer monitors. This will bleed into your audio if the monitor is being controlled by the same chip as the audio effects so it's best to run it 100% brightness just like a high refresh rate monitor. Great review by the way!!! Keep up the awesome work.

😂😂the tension at the warranty really got me

Now I really want this interface 😭

Thanks for the review. It seems this is almost perfect as an interface, especially if you use an external A/D converter. Perhaps they'll be able to squeeze a bit more performance from their next gen in those trouble areas you mentioned. This seems like a decent competitor to the UAD, though UA definitely has them beat if you like spending thousands of dollars on hardware-accelerated plugins.

Thank you Julian. Fantastic, and thorough review. The kind of inteligent review that allows others to make the right purchasing decision. A bit too bad about the input noise performance. Still, one of the better audio interface performers in the consumer grade DAW markets. I expect Antelope will do well with the Core Go. Be well!

Just stumbled across your channel and you have completely out done any review that I;ve watched before! Ould be really interesting to see some comparisons against older interfaces like the focus rite Saffire range and some of the older avid converters! Would also love to see a review of the Antelope Orion to see if something that high end has the same sort of flaws as the zen go. Great video!!!

Just bought it as a package with the Edge Solo mic, 15 additional FX, Bitwig 16 track (Not needed as I got Logic Pro X) for under AUD1000. Looking forward to have this replace my Scarlett 2i2 package...

The knife part had me howling 😂

Hi Julian , Excellent video.What about RME babyface pro fs vs Antelope ZEN synergy core vs Solid state logic ssl2+ vs Black lion audio revolution 2x2 ?

the bonus whit antelope interfaces beside the realtime efx are their worldclase workclock

Do you have a listing of interfaces as you show with the headphone power and mic input performance but with all the specs? That would be great.

Cutting the the warranty seal on a device, simply to quench your curiosity, is irresponsible. Now with that out of the way, cut that baby & open it up! You are fantastic bud! Hope all your new adventures are going excellent. As always, be well bud.

Thank you for sharing! Can you make a video about the Arturia audiofuse Rev2 (if is possible)? Have a nice day! From Chile...

Would love to see Audient Sono and something from RME AND apogee

Hi Julian!) thank you for interesting videos! I would like to see your test of “apogee symphony desktop “ ! I choosing between UA and Apogee Thank you! Kind regards, Denis

Great Video like always.! :D Do you plan on reviewing the appollo twin series? Another real time performance audio interface! ;)

Pity about the warranty sticker, would really have loved to see inside the interface. Amazing work!

please review the motu Ultralite mk5... love your videos...so usefull!

Great review! Even though they are quite different, but if you had the choice: Antelope ZEN GO or Arturia AudioFuse Studio?

ooof look at that LCD bezel!