GM Truck & SUV Turn Signal Problem 1999 - 2013 Chevy and GMC (GMT-800 & GMT-900)

GM Truck & SUV Turn Signal Problem 1999 - 2013 Chevy and GMC (GMT-800 & GMT-900) | AnthonyJ350

Рет қаралды 105,190

3 жыл бұрын

If you have a 1999 to 2013 GM truck or SUV you might be encountering turn signal issues. Symptoms may be: Hyperflash, Turn Signal Indicator not working, Brakes flashing with the turn signal or no turn signal at all.
In this video we go over areas to inspect and parts that may need to be replaced.
Parts:
Flasher Relay: GM Part# 10383321
Rear Junction Block: GM Part# 15304995
#GMT800 #GMT900 #TurnSignal
Subscribe for more automotive tips!: bit.ly/sub2anthonyJ350
Watch my most popular uploads!: bit.ly/anthonyJ350howto
Check out my Amazon storefront www.amazon.com/shop/anthonyj350
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com/shop/anthonyj350
E-Mail: info@gofasthavefun.ca
T-Shirt: teespring.com/en-GB/AnthonyJ3...
Music available - www.jinglepunks.com & www.epidemicsound.com
Intro - "Heartbreaker'" - Gloria Tells
Outro - "I just can't change my Emotions" - Basixx
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
GM Truck & SUV Turn Signal Problem 1999 - 2013 (GMT-800 & GMT-900) | AnthonyJ350
• GM Truck & SUV Turn Si...
ANTHONYJ350
/ anthonyj350

Пікірлер: 78

@user-xw4hn7lb3x 7 ай бұрын

Almost bought a GMC AT4X for $100k! I've been driving around in my 2002 Silverado for the last 15 years. Its paid off of course. Decided to sink a few thousand dollars in it instead of buying a new truck. Just too damn expensive. I've replaced a lot of things from door locks, ignition switch, door latches and hinges, windows and motors, to the hvac actuators and many other components. I have to say, the truck drives and feels like new again. I'm much happier with my decision.

@AnthonyJ350 7 ай бұрын

You fixing your perfectly good 2002 was the right choice. Better financially and for the environment too, because you help reduce production emissions.

@Moondog66602 5 ай бұрын

If you get a good old vehicle, and have some basic skill and tools, regular maintenance can help it last a really long time. My 1998 Chevy 1500 is at 382k miles, still running good.

@AnthonyJ350 5 ай бұрын

@@Moondog66602 Most definitely. I prefer older vehicles, much easier to diagnose and keep going.

@smoken6spd Ай бұрын

Great video helped alot!

@AnthonyJ350 Ай бұрын

Glad the video helped!

@TripleDShow 5 ай бұрын

I just started to have similar problem and going to pull this module and clean and retest tomorrow. My truck is in Albuquerque new mexico. It is a 2000 with 285k. I did crawl under and take a peak at this module and it looks like it has never been removed.

@AnthonyJ350 5 ай бұрын

Let us know what you find!

@priscillaalford9711 Ай бұрын

Thank you so much for your excellent video

@AnthonyJ350 Ай бұрын

Thank you for watching!

@jewllake 3 жыл бұрын

My 06 Yukon has the same junction block and so did my 06 Sierra. Even my new 2018 Sierra has the same thing. I've never have had to do anything to that, but I live in Northern CA. We do get rain, but no snow or salt on the roads. I bet people who launch boats may have issues with that part. Good video!

@AnthonyJ350 3 жыл бұрын

That's a good point about boat owners. Thanks for watching!

@edermorales3831 Жыл бұрын

Thanks this help me a lot

@AnthonyJ350 Жыл бұрын

So glad to hear it helped you!

@snipedeedillygaf4973 6 ай бұрын

tbis has to be the one vid im looking for i hope

@AnthonyJ350 6 ай бұрын

Hope it helps you!

@stealthg35infiniti94 3 жыл бұрын

Anthony nice isolation of the malfunction although I would not have replaced the part once fixed. I also would have used Deoxit with an acid brush on the pins to throughly agitate the product thus removing any embedded corrosion. Blown it air dry, then put a pea size drop of dielectric grease in each connector. That should make it water resistant for years to come. No parts required.

@AnthonyJ350 3 жыл бұрын

But why risk it? It lasted 16 years, just change the part and not worry about it. It was like $100.

@AnthonyJ350 3 жыл бұрын

But didn't you see the example of condensation? What if moisture is going through the case? We don't know how it's manufactured.

@stealthg35infiniti94 3 жыл бұрын

@@AnthonyJ350 Sometimes OEM and aftermarket modules/equipment seals get "Tired" and fail to seal adequate...When possible, I'll take them apart and reseal with All Weather RTV Selicone. Save the replacement parts money for some other fun things.

@AnthonyJ350 3 жыл бұрын

@@stealthg35infiniti94 Would you take apart this completely sealed unit that controls the lights and trailer brakes? Would you risk driving with the old part?

@stealthg35infiniti94 3 жыл бұрын

@@AnthonyJ350I always attempt to repair first to a reliable point. If I don't feel the repair is not going to have much longevity, then I replace the item. Other factors come in to play, such as replacement cost, how long does it need to last, how critical is the part, is it a high failure item? Every situation has its own opinions to contain with.

@patrickschley6418 5 күн бұрын

2003 GMC 2500. I had the 7-pin plug apart on the truck bumper and have no power on the red (left blinker) wire while the right brown wire is fine. The panel you replaced, does this control the trailer too? I have a buddy who tells me the Rear Junction Block could not be the issue.

@drewbush6535 3 жыл бұрын

Nice

@AnthonyJ350 3 жыл бұрын

Thanks for watching!

@Igottarace Жыл бұрын

Love your channel. I did this even though it didn’t look bad and also changed the flasher to Novita and didn’t fix my problem. I went to all led bulbs and they all work except the rear turn signals. When I put the led rear turns in, all 4 side markers stop working. When I put the incandescents back in, everything works as it should. Before the flasher, I put resistor turns in and everything worked until I turned the headlights on. Seems every time I try something, a different problem arises. Any idea?

@AnthonyJ350 8 ай бұрын

Check out my GM truck grounds video kzfaq.info/get/bejne/etecY7imnZO3fp8.htmlsi=oxeezQX5d0ns0jOG And install load resistors at each turn signal bulb.

@troubleshooter1975 Жыл бұрын

I actually don't think the problem was 'inside' the module! Having specialized in finding difficult electrical problems, the most likely cause is the connectors themselves. It appears that distribution block is just that. I suspect there is NO circuitry inside it (at most, might have two diodes for the high brake l lamp - and these symptoms didn't directly correlate to the high brake function). [It might not even have a PC interconnect board at all, could be welded buss strips inside]. I do not dispute replacing it, but if it was the harness connectors, then a more meticulous inspection of both the plugs and the jacks, would have been the most helpful. If the module jack pins were in good shape, and the corrosion was mainly in the plugs, then replacing the module did nothing. Cleaning, spraying and re-mating the plugs, is what likely fixed it. I do like you; I spray a cleaner/lube first, as it can penetrate down to the wire crimps that the grease won't reach, and also the receiving socket's interior area (male pins). Then I apply grease to the female end, and re-seat the connectors several times before final engagement. [A 1/16 or so of grease in every pin 'port' is all I use, but you could 'pack the sleeves pin ports if you anticipate extreme conditions.] Note, TOO much grease can trap air pressure and blow out the connector's nose gasket ring, or the rear wire boots/sleeves! What he showed is about how much grease I apply. Mr K L

@AnthonyJ350 Жыл бұрын

Thanks for the comment!

@ragnarlinn6431 Ай бұрын

I have an 04 2500hd But my front ledt turn signal lights up when I apply the breaks. What would case this to happen I changed the switch relay under the steering wheel

@AnthonyJ350 Ай бұрын

Voltage bleed through. What brand LED did you install?

@rodrigodeleon8777 3 жыл бұрын

You should do more content on your cateye

@AnthonyJ350 3 жыл бұрын

I have a whole Playlist. You didn't see it?

@rodrigodeleon8777 3 жыл бұрын

I have but more 😂👍

@jewllake 3 жыл бұрын

@@rodrigodeleon8777 yep!

@hunt3r...69 3 жыл бұрын

Hello! How can I get in contact with you? I would like to know about a costumized sub box -Aroon

@AnthonyJ350 3 жыл бұрын

Hi there, you can email me at info@gofasthavefun.ca

@Raider_Jimmy 2 жыл бұрын

So I have a 2005 Silverado 1500 when I turn on my turn signals to turn the signal bulb and the running bulb turn on together on the taillights, how can I get them to alternate back and fourth?

@AnthonyJ350 2 жыл бұрын

They don't alternate when you turn your lights on? Mine is the same year and just does it.

@Raider_Jimmy 2 жыл бұрын

@@AnthonyJ350 no what I haven’t tried actually turning them on and see what they do, going to check in a while I was just looking during the day.

@AnthonyJ350 2 жыл бұрын

@@Raider_Jimmy Try it and let us know

@Raider_Jimmy 2 жыл бұрын

@@AnthonyJ350 so this group I follow on fb told me that they don’t alternate because I have led bulbs in them 🤦‍♂️

@AnthonyJ350 2 жыл бұрын

@@Raider_Jimmy I have LED bulbs too. Is mine the only one? Did you try it with the lights manually on and signaling yet?

@dovanation 3 жыл бұрын

Dang, just throw the parts cannon at it. That'll fix the issue!

@AnthonyJ350 3 жыл бұрын

We did

@Hot80s Жыл бұрын

The great white north were even rust starts to rust.

@AnthonyJ350 Жыл бұрын

Thanks for the comment

@omargarcia1996ogog Жыл бұрын

My turn signals arnt workin or wont make noise is it cus i changed my turn signals to switchback LED BULBS?

@AnthonyJ350 Жыл бұрын

Did you install load resistors? kzfaq.info/get/bejne/hLOfjKqCzaqWdH0.html

@omargarcia1996ogog Жыл бұрын

@@AnthonyJ350 they have built in resistors on them they was workin fine but recently rn nun my singals work or make or make noise

@AnthonyJ350 Жыл бұрын

@@omargarcia1996ogog The relay flasher might need to be replaced. I showed it in the video

@omargarcia1996ogog Жыл бұрын

For a 2002 tahoe is located in same place?

@AnthonyJ350 Жыл бұрын

@@omargarcia1996ogog Haven't verified but probably similar. The frames are different.

@kennethfontes1201 Жыл бұрын

Y is it my relay is a lot smaller on my 2091 Tahoe there a bit. Biger on video

@AnthonyJ350 Жыл бұрын

No idea

@GetToughOrDie 10 ай бұрын

So..I changed this Module and STILL All my rear lights are blinking with the turn signals! I'm thinking "Where else do all these lights/wires come together where they can cross each other"?? I guess the Trailer Plug. PLEASE help if anyone has a idea if this can be a ground or what else it can be. Meanwhile I'm gonna light test everything and hopefully find the issue.

@AnthonyJ350 9 ай бұрын

Did you change the relay? Check the grounds as well.

@pchevelle9653 2 жыл бұрын

This video was not good for a 2009 Silverado. They don't have a flasher relay. It is in the bcm...

@AnthonyJ350 2 жыл бұрын

You still have that junction piece in the back on the frame. Which is where I had the problem and what the video was predominantly about.

@talonsheek3593 Жыл бұрын

Hey I have a 09 Silverado and my entire left side (blinker and brake lights) do not work. I have checked all the fuses and even gotten a new fuse panel. What did you find wrong with your Silverado?

@fortrep1 9 ай бұрын

@talonsheek3593 I have a 2010 and having the same problem. Did you find out what was wrong?

@partytimexxx8931 Ай бұрын

Yeah this isnt applicable to 2008 chevy Avalanche. From everything I've researched the flasher module is built in to the BCM. Pass Rear blinker doesnt flash with standard bulbs and with led they work but hyperflash. Other side works perfectly. I work on mechanical all day but electrical is a headache for me. Is there a ground on the rear somewhere that could affect only one light?

@AnthonyJ350 Ай бұрын

I would measure the ground wire on each side. I had headlight issues due to a poor ground a couple years ago.