Antique Lantern Christmas Tree Ornament

No video

Antique Lantern Christmas Tree Ornament

Рет қаралды 47,481

9 ай бұрын

I demonstrate turning a unique, antique lamp ornament that lights up! These make unique and memorable Christmas gifts. If you find my videos helpful, you can buy me a virtual cup of coffee with this link. www.buymeacoff...
Watch the followup video I did with more tricks and techniques on this project • Lantern Video - More T...
The Woodturning Store is a great place to buy the Record Power Camvac Dust Extractor and many other woodturning accessories www.thewoodtur... As an affililiate I earn from qualifying purchases.
As an Amazon Associate I also earn from qualifying purchases from my Amazon shop www.amazon.com....
Here is a link to some inexpensive ones without a timer amzn.to/3Qi5uVS
Link to ones with a timer amzn.to/49h77Mt
Link to some colored ones without a timer amzn.to/3sk2dNY
You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website www.mikepeacew...

Пікірлер: 123

@MikePeaceWoodturning 9 ай бұрын

I added some affiliate Amazon links to make the LED lights easier to find. See the area under the description above. Also check out the follow up video on this project kzfaq.info/get/bejne/Z6uIdpOfl5jKpYk.html Also, I forgot to mention the hole size is 7/8".

@BobShaffer-wt6cs 23 күн бұрын

Another great video Mike. This is a super idea.

@MikePeaceWoodturning 22 күн бұрын

Thanks 👍

@rickmorgan102 9 ай бұрын

I was recovering from some knee surgery and struggling to come up with this year’s Christmas ornament. Knee’s getting better and this ornament gets the nod. Friends and family, the count is 36. Thanks!

@MikePeaceWoodturning 9 ай бұрын

You are welcome.

@arlineastman 6 ай бұрын

Mike Thanks for your videos. Me and the other disabled vets I teach woodturing to have watched your vidoes for years now

@MikePeaceWoodturning 6 ай бұрын

I appreciate that Arlin. Thank you for your service.

@attyschack 8 ай бұрын

Following your instructions and tips, just made a bunch of these for family and friends. It's a fun project. Thanks.

@MikePeaceWoodturning 8 ай бұрын

Wonderful!

@couerl 9 ай бұрын

I like how you did the hanger and this is a cute project. I'll knock a few out this weekend as I'm getting ready to do my Christmas presents.

@randykniebes5364 8 ай бұрын

i always enjoy your explainations thanks

@MikePeaceWoodturning 8 ай бұрын

So nice of you to say

@davidanderson5767 9 ай бұрын

Appreciate your project choices. They are doable.

@garyhead577 9 ай бұрын

I love these....I'm going to make some. I've already ordered the tea lights..😆

@MikePeaceWoodturning 9 ай бұрын

Have fun!

@kandiecandelaria3134 9 ай бұрын

These are so cute!!

@ronpettitt1217 9 ай бұрын

Thanks for this Mike. I have been looking for ideas for Christmas gifts for the gals in my family. I try to make something new for the tree each year. This is perfect

@MikePeaceWoodturning 9 ай бұрын

Wonderful!

@johnchalikian3239 9 ай бұрын

Mike, nice ornament and demonstration. You did not mention the diameter of the 4 holes. Looks to me between 3/4-1” diameter. I will be doing this project and will see what size works. Thanks for all that you do.

@MikePeaceWoodturning 9 ай бұрын

You are correct. I used 7/8"

@stefancartmale8034 9 ай бұрын

Wonderful project and thank you for the follow-up video with the better angles and decorating tips! I made 3 in the shop today and have the blanks set for 9 more!

@MikePeaceWoodturning 9 ай бұрын

Wonderful!

@1954JDR 9 ай бұрын

Easy and beautiful!👍👍

@MikePeaceWoodturning 9 ай бұрын

Thank you! 😊

@danielcave466 9 ай бұрын

Great project thanks

@leenoble7472 9 ай бұрын

Thanks Mike. Another great video.

@MikePeaceWoodturning 9 ай бұрын

Glad you enjoyed it

@andersodman296 9 ай бұрын

Thanks Mike! I gave it a try and my wife loved it so now I have to make three more! 😄

@MikePeaceWoodturning 9 ай бұрын

Fantastic! Happy wife happy life.

@mikelarlham6764 9 ай бұрын

Well, I made one, they’re really cool!!! Thanks for sharing this idea!!👏👏👍👍👏👏

@MikePeaceWoodturning 9 ай бұрын

You’re welcome 😊

@kellyshaw2877 9 ай бұрын

These are great Mike! Thanks for making a video of that article.

@michaelmorris3627 9 ай бұрын

Thanks, great demo!

@mrstinamuller2687 8 ай бұрын

I going to try this Thank you 😀

@davidmorgan7522 9 ай бұрын

That's cool! Thanks for sharing Mike! Take care, Dave

@MikePeaceWoodturning 9 ай бұрын

You bet

@ptcruiser2012 9 ай бұрын

Thanks Mike. Really good idea to bring this project to life via video. As always you are quite thorough with your detail. A bit hard to hear you sometimes but no reason to spend more money. You get your point across and that is what is important.

@MikePeaceWoodturning 9 ай бұрын

Glad you enjoyed it!

@markwoodcock01 7 ай бұрын

Hi Mike, Mark here from the UK. I found this a great video, you explained everything so well, thanks for sharing and keep them coming !! 👍🏻

@MikePeaceWoodturning 7 ай бұрын

Thanks, Mark.Safe turning my friend.

@mikelarlham6764 9 ай бұрын

Very nice! A cute little lamp, I think I might have a go at this one!!!🌲🌲👍

@MikePeaceWoodturning 9 ай бұрын

You should!

@kshaffer1964 9 ай бұрын

Very nice... I made about thirty Christmas trees to give away last year. I may well try making a few of these ornaments this year. Thanks for the idea and demo.

@AndysCornishCreations 9 ай бұрын

Hi Mike... Love this idea... nicely turned and a great finish... I may be copying this one if you don't mind... Take care my friend...All the best.....Andy

@MikePeaceWoodturning 9 ай бұрын

Sounds great!

@jnol9009 9 ай бұрын

Another nice Christmas project! Well done and take care.

@MikePeaceWoodturning 9 ай бұрын

Thanks, you too!

@MrPete1x 9 ай бұрын

Thanks Mike, an idea for all those off cuts and scraps

@MikePeaceWoodturning 9 ай бұрын

You bet

@Tim_Pollock 8 ай бұрын

Thanks for the inspiration Mike! I've been wanting to turn a lighthouse for several years and after seeing your video I loved the look of the lantern and decided it would look good for the top of a lighthouse. I just never had been satisfied with the designs for the top I'd seen others used on theirs. I turned my first lighthouse using this design and I think it came out pretty good. I also made one of the antique lanterns for my mom.

@MikePeaceWoodturning 8 ай бұрын

That is awesome!

@lancemorgan651 8 ай бұрын

Great video Mike, looks amazing,

@MikePeaceWoodturning 8 ай бұрын

Thanks 👍

@artfoolbodger3139 9 ай бұрын

For extending drilling depth, try a 3/8" x MT2 endmill holder from a machinists' supply.

@chrisgiftshop3127 9 ай бұрын

These are great. Been looking for a kitless ornament of some kind and looking forward to trying this. I still need to go back and check out the candle one you did as well. Thanks for sharing.

@MikePeaceWoodturning 9 ай бұрын

Please do!

@jackthompson5092 9 ай бұрын

Beautiful little lamp Mike.

@MikePeaceWoodturning 9 ай бұрын

Thanks 👍

@haroldsworld 9 ай бұрын

awesome

@marcroemelen6836 8 ай бұрын

Sir I hope you don’t mind I shared your video on my facebook. I am in awe with your work. You are a real artist. I hope one day I’m able to make things as beautiful as you do.

@MikePeaceWoodturning 8 ай бұрын

The more mistakes and shavings you make the better you get. 10,000 more Grasshopper!

@brianjohnson5141 9 ай бұрын

I did a quick test run on this ornament and loved it. I guessed that the 4 holes are 1”? I didn’t hear you mention the size Keep up the awesome work you have been very inspiring to me and I am sure many others.

@MikePeaceWoodturning 9 ай бұрын

7/8"

@glencrandall7051 9 ай бұрын

I really like this one Mike. Not that I didn't like your previous stuff but this one just reached out and grabbed me. It looks like an easy turn. And the tea light gives it a little extra. You didn't mention the diameter of the side lights. I am guessing about 3/4 inch. Maybe a bit smaller. Thank you for sharing. Remember, when the wood goes around, the face shield goes down. 🙂🙂

@MikePeaceWoodturning 9 ай бұрын

7/8", thanks for asking.

@kimmetzger279 8 ай бұрын

Great job, Mike. Just one more detail would have been nice: how far up from the end of the block did you drill the holes. I guessed 1 1/2"

@MikePeaceWoodturning 8 ай бұрын

40mm

@DKWalser 9 ай бұрын

Mike -- I really liked this idea and may give it a go. When I was watching the video, I thought a set of the lanterns would really look good if you could use multicolored tealights (instead of simply warm white, some lights would be blue, others green, red, etc.). Sure enough, Amazon has them for about 50 cents each (when bought 24 at a time). You might want to add a set to your links -- just to give everyone one more option.

@MikePeaceWoodturning 9 ай бұрын

Good idea. The Amazon link genrator is not working at the moment but I will add links later.

@walshjp17 9 ай бұрын

I very much like the lantern ornament, Mike. Well done. Some of your turning, however, was blocked because of the camera angles (the initial turning of the roof, for instance) and the volume was in and out. I had to keep increasing the volume to hear what you were saying.

@MikePeaceWoodturning 9 ай бұрын

Sorry about that

@davesullivan3289 9 ай бұрын

Mike. I really enjoy watching your videos. You do such a great job in explaining what you are doing that it seems so simple to do. Where do I get a texturing tool at. Have you ever thought about using a wire for accent. I hope you never run out of ideas to make. Thanks

@MikePeaceWoodturning 9 ай бұрын

Thanks for your kind words. I actually did use a burn wire on a couple but mostly obscured by the metal reactive paint. Check out my Amazon shop link in the description for every video. www.amazon.com/shop/mikepeacewoodturning I will get a small commision on anything you purchase from Amazon withing 24 hours of you opening up my shop link.

@derekbillingsley4457 7 ай бұрын

Would be better if you had it side on so we could watch how you progress

@_Egor_Egorov_ 9 ай бұрын

Еxcellent

@alun7006 9 ай бұрын

Thanks, Mike - I will definitely have a go at making one of these! Can you tell me about your drill table? It looks to be made of wood or melamine laminate or similar?

@MikePeaceWoodturning 9 ай бұрын

Yes, melamine

@mdaley3102 8 ай бұрын

Very nice idea. I really like the lantern look. How did you do the oxidized copper look like the one in the thumbnail.

@MikePeaceWoodturning 8 ай бұрын

Watch the sequel video link at the end of this or in the video description area.

@billy19461 9 ай бұрын

Couldn’t see a thing you were doing. An overhead view would have been much better. You know that I always love your videos.

@MikePeaceWoodturning 9 ай бұрын

Noted!

@user-bm8jw4uc2d 8 ай бұрын

Mike, you didn’t mention what size bit you used to drill out the center of the lamp. Cute ornament!

@MikePeaceWoodturning 8 ай бұрын

7/8"

@MarklTucson 9 ай бұрын

Very neat Christmas project and definitely goes on the "things to make" list. One question, would there be an advantage to drilling all the way through the blank for the side holes instead of drilling on each face? ... or would that introduce other issues?

@MikePeaceWoodturning 9 ай бұрын

I would be concerned about the holes being perfectly centered if the blank was not absolutely square. It could cause an off center hole on the back side - Twice. But try it and see and let me know how it works out for you.

@MarklTucson 9 ай бұрын

@@MikePeaceWoodturning Thanks, that's a good point, one would have to start with a perfectly square piece to get good results.

@artswri 9 ай бұрын

Great project, great gift idea. Thanks a bunch!

@user-hy2lf2gd9g 9 ай бұрын

Loved the videos that you put out. Just watched the lantern one and as a new turner it is with in my scope. Where bouts are you located. I'm in Washinton. Eric morgan

@MikePeaceWoodturning 9 ай бұрын

Atlanta

@pj48854 9 ай бұрын

Great job Mike! Can u send me the info on where u get ur bandsaw blades? Thanks!

@MikePeaceWoodturning 9 ай бұрын

Sorry. My seller is gone. Highland Woodworking has them.

@TheJkaeser 8 ай бұрын

Hi Mike,...I turned the Antique Lantern ornament you demoed and was a hit with friends and family. Thank you. I do have a question regarding finials..How do you under cut the base so that it fits the curvature of the ornament. I can't seem to be able to get a tool in close enough without hitting the chuck or getting a catch. Your help would be appreciated. Thanks

@MikePeaceWoodturning 8 ай бұрын

Practice makes perfect.

@TheJkaeser 8 ай бұрын

Thanks for the quick response Mike, but not quite the answer I was looking for...@@MikePeaceWoodturning

@markb8954 8 ай бұрын

@@TheJkaeser Give urself more length on the undercut side.

@lancemorgan651 8 ай бұрын

Hi mike could you tell me what size fostner bit you are using in the piller drill please

@MikePeaceWoodturning 8 ай бұрын

7/8" as posted in my pinned comment and a couple of responses to the same question. Can't believe I did not make that clear in the video like I should have.

@lancemorgan651 8 ай бұрын

@MikePeaceWoodturning thanks Mike sorry must of missed that

@christineplucker6959 9 ай бұрын

Mike, great project, always looking for a new Xmas ornament, this one is perfect. I like your commentary as you’re working, however, it would be most helpful if you spent some time moving the camera to give us a better look at what you’re doing. Having the camera in only one position throughout the sequence leaves viewers wanting. Keep putting out these projects, love ‘em!! -Dave

@MikePeaceWoodturning 9 ай бұрын

I agree. Watch the followup vid I did Tues.

@waynesovocool4556 26 күн бұрын

What diameter are the drilled holes?

@MikePeaceWoodturning 25 күн бұрын

Side holes are 7/8" bottom to fit Tea light but about 1 3/8"

@larryfetterman3528 9 ай бұрын

What size drill bit did you use for the holes?

@MikePeaceWoodturning 9 ай бұрын

7/8". I just put this in a pinned comment that goes to the top of the comments for others to see. Thanks for asking.

@TheJkaeser 9 ай бұрын

Mike, I was following this video to try and make a later. You said that from the bottom of the block the hole center should be 40 mil. That equates to .04 inches. In the video it looks like you measured up about 1.5 inches. Do you have plans for this on your site....Thanks...

@MikePeaceWoodturning 9 ай бұрын

40mm

@Rodneygd 9 ай бұрын

So, I’ve just finished making several of these for holiday gifts. After showing them to various people the next thing asked after how do you make them is how much do they sell for. Anyone with experience selling their creations?

@MikePeaceWoodturning 9 ай бұрын

I do very little selling but have set upa table at a few church and neighborhood holiday sales. I sell my birdhouse ornaments for $35. These are actually faster to turn but I believe they would easily sell for about $35 in my area. YMMV.

@Rodneygd 9 ай бұрын

Thanks Mike!

@scootermagavin12 9 ай бұрын

FYI, I'm m not seeing the tea lights on your Amazon list.

@MikePeaceWoodturning 9 ай бұрын

They were cheaper on ebay so I did not provide an Amazon link. Thanks for checking

@scootermagavin12 9 ай бұрын

@MikePeaceWoodturning Thanks, Mike, I'll search ebay. Thanks for all of your videos! I made your snowmen last year for Christmas gifts. Looks like this year will be this lantern.

@TheJkaeser 9 ай бұрын

I like this ornament but would have liked a better camera angle so that I could see what you were doing...

@MikePeaceWoodturning 9 ай бұрын

I hear ya. Watch the followup video.

@archiehebron8944 9 ай бұрын

Madrone?

@MikePeaceWoodturning 9 ай бұрын

Spalted Bradford Pear

@terrycrouch1390 9 ай бұрын

Can't see the work very well at the current camera angle.

@MikePeaceWoodturning 9 ай бұрын

Watch the seqquel.

@johnmeeks9618 9 ай бұрын

Mike, I like the ornament when it was all done, but your camera angle shows me nothing about how you are doing the turning and shaping.

@garyfestarini9608 8 ай бұрын

The project is great and the method is well presented... However it is disturbing that you encourage wearing a watch and ring while you are turning. It is a potentially dangerous practice

@MikePeaceWoodturning 8 ай бұрын

Thanks for sharing your concerns. We each have to decide what is a risk worth mitigating and what isn't. And we need to understand what that risk is. I have done both. YMMV.