I got mine just a few days ago and I like it so far print quality is good. My only complaint is the flinging poop lol highly recommend printing the poop catcher. Not a big fan of the slicer either a poorly forked version of PrusaSlicer. It also wastes a lot more filament for multicolor prints than necessary. assembly was definitely a breeze I have assembled a lot of 3d printers, and this was the easiest. But overall I think its a great printer and I am happy with it.
@Diy.dopamine_7 күн бұрын
@@Creepy_tales75 the poop catches print is a must! And if I can make a recommendation, use the anycubic beta slicer. It’s based off of orca slicer and is sooooo much better. But I agree with you, one of the easiest printers I’ve set up!
@vablackbeltАй бұрын
oh nice it takes the small rolls of filament too! thats exciting i can't wait to set mine up
@Diy.dopamine_Ай бұрын
yup! although not as smooth as using the regular size rolls, still works great and gets the job done!
@RutuBhowmikАй бұрын
Users often appreciate the machine's ease of setup and use, as well as the quality and accuracy of the printed products.
@Diy.dopamine_Ай бұрын
Yup! It’s a great printer if you’re just getting started with 3D printing
@RutuBhowmikАй бұрын
@@Diy.dopamine_ yesss
@jimmying8172Ай бұрын
I've subscribed because you are Canadian too!
@Diy.dopamine_Ай бұрын
Cheers bud 🇨🇦🍻😉
@mrfoamerukАй бұрын
the 12-minute bench I did on it came out almost perfect.
@Diy.dopamine_Ай бұрын
That’s awesome!
@BricoMatos20 күн бұрын
Bonjour, Plein de petites questions, le benchy, c'est celui proposé par la marque dans la clé usb ? Si c'est le cas, c'est pas une réussite de leur part ! 12mn seulement pour une telle pièce, il aurait mieu valu la faire en 15 et qu'elle soit parfaite ! Sinon, on n'a rien vu de la partie logicielle, tu as utilisé quoi pour piloter la machine ? Cura ? (beurk) Prusa slicer ? Orca slicer ? Et tu ne donnes pas vraiment de caractéristiques techniques. Je cherchais à savoir quelle est la température max du plateau, mais même chez eux, il n'y a rien d'indiqué !! Sinon merci pour ta vidéo.
@Diy.dopamine_20 күн бұрын
Hey there! Thanks for you questions and I’m happy to answer them. They do provide the speed benchy on the usb and yes it’s not perfect. However they do provide a second benchy printer with normal settings that prints in about 16 mins which does turn out perfect! I used both Anycubics slicer as well as the beta Anycubic software which is based off of orca slicer. The user interface of the Anycubic slicer is awesome! However the beta version based off of orca slicer gives you so much more control!
@Diy.dopamine_20 күн бұрын
Translated to French: Salut! Merci pour vos questions et je suis heureux d’y répondre. Ils fournissent la vitesse sur l’USB et oui, ce n’est pas parfait. Cependant, ils fournissent une deuxième imprimante de banc avec des paramètres normaux qui imprime en 16 minutes environ, ce qui s'avère parfait ! J'ai utilisé à la fois le slicer Anycubics ainsi que le logiciel bêta Anycubic qui est basé sur le slicer orca. L'interface utilisateur du slicer Anycubic est géniale ! Cependant, la version bêta basée sur Orca Slicer vous donne bien plus de contrôle !
@steveng724Ай бұрын
This , the anker make m5c , and the creatility k1c are all the same price. Im not sure which is best.
@Diy.dopamine_Ай бұрын
@@steveng724 considering this one has the multicolor printing as well as the filament dryer in an all in one package, I think the Anycubic would be your best bet
@monkeysausageclubАй бұрын
Very reasonably priced for an multi colour enabled bed slinger.
@Diy.dopamine_Ай бұрын
@@monkeysausageclub cheapest one u can find on the market
@ElectroMac74Ай бұрын
can you instead of the change color tower print something useful? thanks
@Diy.dopamine_Ай бұрын
@@ElectroMac74 if you use the regular Anycubic slicer, no. But if you use orca slicer, I believe you can set it up to print useful objects instead of printing the purge tower!
@ElectroMac74Ай бұрын
@@Diy.dopamine_ thanks for the info
@tulio3dprint3 күн бұрын
el benchy salio feo jajajjaja, yo el spiderman lo hago con un extrusor a un color y los 3 colores en la misma capa desde hace 7 años
@Diy.dopamine_3 күн бұрын
Hey that was just an example of a benchy printed on the hype speed. A regular benchy turns out perfectly! And I printed the speed benchy once more on a more stable desk, and the print quality has turned out almost perfect! And that’s great that you’ve been able to print multi color prints with one nozzle!
@nekrosoft139 күн бұрын
Anycubic could have done so much better with cable management. Those cables should never have been in the front
@Diy.dopamine_8 күн бұрын
@@nekrosoft13 for real!!! It’s the one thing I don’t like about the printer. Other than that, the printer is absolutely amazing!!!
Ай бұрын
Essa também faz ruido no eixo Y tal como a Kobra 2?
@Diy.dopamine_Ай бұрын
não, isso não faz barulho no eixo y como o kobra 2. é bastante silencioso durante a impressão no modo normal.
Ай бұрын
Boa resolveram esse problema pelo que parece@@Diy.dopamine_