AnyCubic Photon M3 Max Auto-Feed Not Working Functionality Diagnosis and Repair

Рет қаралды 2,501

7 ай бұрын

I reached out to anycubic about my autofeed unit not working, instead of them walking me through how to diagnose the issue, they sent me a full set of parts with the cap, pump, and tubes, but still I didn't know what did what or how
I eventually figured out what does what so here is some guidance for you guys
I reached out to anycubic about my autofeed unit not working, instead of them walking me through how to diagnose the issue, they sent me a full set of parts with the cap, pump, and tubes, but still I didn't know what did what or how
I eventually figured out what does what so here is some guidance for you guys
Side note, using anycubic resin bottles, when the status reads:
No Resin In Bottle, I weighed the bottle:
186 without cap, i emptied everything in that bottle to another fresh new bottle, so now it reads:
96 without cap, which means theres an excess of 90 grams that the pump cant reach / autofeed
BRAND NEW FULL BOTTLE: 1093 with cap
BRAND NEW FULL BOTTLE: 1085 without cap
www.tmprojection.com/links
/ tmpro_cos
/ tmprojection
/ tmprojection_com
/ tmprojection
/ tmprojection
www.ebay.co.uk/sch/i.html?_ss...

Пікірлер: 16

@TMProjection 3 ай бұрын

Guys I redesigned the cap completely, improving many things, check out the full video with print files here: kzfaq.info/get/bejne/aNyiiLmVtL-8ZoU.html

@kmyymk2 3 ай бұрын

Some plastic wrap solved my problem thank you i was getting a little mad lol

@gwhite00 6 ай бұрын

Great advice, thanks

@FreeRadical666 3 ай бұрын

Thanks. Happened for me too. Going to try your fix.

@NeoIsrafil 6 ай бұрын

Thanks man, i had a suspicion that there was something not right. Mine didnt come with a washer. I fortunately have a ton of nylon, rubber, and fiber washers so i put one that was about the size of tbe bottle diameter in and suddenly it was pumping fine.

@TMProjection 6 ай бұрын

my pleasure, anycubic couldve just this in the support instead of sending me a whole new replacement lol

@TheDominicano13 4 ай бұрын

Thank you man. That was my problem too 😂😂

@bensontam 2 ай бұрын

are you touching the resin by your bare hands?

@DevilsWings 5 ай бұрын

Hey don´t know if you will see this comment, my feeder is for some reason only dripping instead of flowing like yours. Got any idea why it does that? I did put the little paper washer back on and closed the lid tight. And it´s on 100%.

@TMProjection 5 ай бұрын

yeah i figured out the problem completely, its the cap design, its crap actually im making a new video on it and a full 100% fix, i redesigned the cap ill publish a new video and files on the new cap soon

@DevilsWings 5 ай бұрын

@@TMProjection thank you so much. Your legit the hero we all need. Ngl without your video on the little paper washer i would´ve been clueless. Always thought you don´t need them and threw does away. I might try out some flat gaskets for piping maybe the ones out of rubber might work better.

@violator013 4 ай бұрын

⁠@@TMProjectionjust poured some silicone into feeder’s bottle cap to make permanent gasket. Silly design with these paper gaskets. Update: just tested, works like a charm

@alejandroflores6038 4 ай бұрын

fuck man I've been trying to find the solution to this for so long... I think I might've accidently thrown that washer away

@TMProjection 4 ай бұрын

actually update on this video, even that washer itself doesnt fix this most of the time, ive redesigned the cap, which is the issue in itself, ill have those files out soon

@alejandroflores6038 4 ай бұрын

@@TMProjection sweet, ill keep tabs on checking in on that update!

@alejandroflores6038 3 ай бұрын

@@TMProjection hey following up on this, did you ever release that file you were talking about?