Anycubic Photon Mono X 6Ks Review - Better than any M5 printer
Рет қаралды 59,080
Күн бұрынBuy the Anycubic Photon Mono X 6Ks Here: geni.us/MonoX6Ks
Amazon: amzn.to/3OG6e6x (This and all Amazon links in our video description are affiliate links. Clicking these and making any purchase will earn us a commission from Amazon at no cost to you)
Anycubic doesn't seem to understand what "S" means, unless to them it means, Whatever the heck they want it to mean at the time. Does it mean "Speed", "Simple" or something else? Because here it's been used to say that this is a better version of a similar printer that has a different name, but also a cheaper version of another printer that does have the same name, sans "S". But anyway. What they have delivered, is their best new printer so far. yeah, despite the lower resolution, this is better than anything the M5 series has to offer, it's better built too!
Get any printer working easily with the Photonsters XP Range Finder - www.thingiverse.com/thing:602... (watch my video for full instructions • How to Print Perfect M... )
Join this channel to get access to perks:
/ @fauxhammer
Buy WARGAMER - The best Resin for Miniatures yesthats3dprinted.com/pages/w...
3D Printer Cleaning Mat: geni.us/3DPrinterCleaningMat
This Video is part of our series looking for the Best 3D printer for Miniatures; www.fauxhammer.com/top-10/the...
Special thanks to the following Creators who provided models
Creature Caster - www.myminifactory.com/users/C...
Wolverine - Drafnir Studios - cgtrader.sjv.io/3eJyqv
Artis Opus FauxHammer Essentials Set: store.artis-opus.com/products...
FauxHammer Patreon - / fauxhammerblog
FauxHammer Facebook Group - / painthub
FauxHammer 3D Printing Group - / 3dprintedminiatures
FauxHammer Discord - / discord
Best Airbrush For Miniatures: www.fauxhammer.com/top-10/bes...
Beginner Airbrush: www.fauxhammer.com/featured/b...
Affiliate Links to support us.
Element Games - elementgames.co.uk/wargames-a...
Wayland Games - affiliates.waylandgames.co.uk...
Forbidden Planet: forbiddenplanet.com/catalog/?...
Amazon - www.amazon.co.uk/s?k=Warhamme...
Website: www.fauxhammer.com/
Facebook: / fauxhammerblog
Twitter: / fauxhammerblog
Instagram: / fauxhammerblog
Pinterest: www.pinterest.co.uk/fauxhammer/
Video Editing by VidPros: app.vidpros.io/r/J50Z26
00:00 - Intro
@FauxHammer 8 ай бұрын
Buy the Anycubic Photon Mono X 6Ks Here: geni.us/MonoX6Ks Amazon: amzn.to/3OG6e6x (This and all Amazon links in our video description are affiliate links. Clicking these and making any purchase will earn us a commission from Amazon at no cost to you) Get any printer working easily with the Photonsters XP Range Finder - www.thingiverse.com/thing:6023738 (watch my video for full instructions kzfaq.info/get/bejne/fdNgYN1qnJfYl40.html) Join this channel to get access to perks: kzfaq.info/love/_9Jsf3SP8aMJgn0xv5jHjAjoin Buy WARGAMER - The best Resin for Miniatures yesthats3dprinted.com/pages/wargamer?ref=FauxHammer
@leonardocastaneda904 7 ай бұрын
Between this and the Halot Mage non pro which would you pick if both where 350 including tax and shipping? I can't make my mind! Thanks for the amazing video!
@FauxHammer 7 ай бұрын
@@leonardocastaneda904 between them? I’d pick the Mars 4 Max kzfaq.info/get/bejne/h9ichLefypnHYJs.html
@lakai69dg 3 ай бұрын
I just got mine because of this video! It's amazing. Sadly it's been to cold on the west coast U.S as of late so I've just been printing exposure tests but honestly even at 58°F it's working nice in my garage.
@highrise9559 8 ай бұрын
I have both the 6Ks and the M5s and though both printers are awesome, the 6Ks is nowhere near as good as the M5s. I will often print duplicates of the same pieces to both printers since I am still learning to paint. I have both printers calibrated extremely well and am using the exact same resin in both. The M5s consistently prints better than the 6Ks and with less fails. Don't get me wrong, the 6Ks is great and I don't regret for a moment purchasing it. But in the end, the M5s is the clear winner.
@kypdurron6168 8 ай бұрын
Are you Happy with the m5s? Because of Ross reviews, I have cancelled my preorder and ordered the Saturn3 . I am very happy with it, but i wanted to try out the features of the m5s, and iam happy, that i dont have issues with that feature but iam sad that i can't try them out
@guillaumevanoost811 8 ай бұрын
@@kypdurron6168it’s a saturn 3 or saturn 3 ultra ? Don’t know if I should change my order to a saturn 3 ultra. Thanks
@kypdurron6168 8 ай бұрын
@@guillaumevanoost811 Saturn3 without ultra. It prints fantastic
@highrise9559 8 ай бұрын
@@kypdurron6168Very happy with my M5s. I did abandon the ACF after using up a bottle of High Speed Resin because I really don't need the speed, especially since you have to print at 100 mu (0.1mm). I usually print at 50mu. The only time I have failed prints are when I screw up the supports. Being a noob at resin printing, that happens quite often. Also, the Anycubic app works flawlessly.
@markburton5292 8 ай бұрын
do you find the auto level to be somewhat random. that's what as I'm finding. if not i wonder what the difference is.
@maxpower8080 8 ай бұрын
Your revievs are the best on KZfaq by far. Not just compoaring stats, you test the printers, every detail, i like
@FauxHammer 8 ай бұрын
Thanks so much ❤️❤️❤️
@user-bv9lu7du6p 8 ай бұрын
How do you feel about matrix light sources in general vs cob refractive vs cob collimating?
@chuckrodriguezfishing2799 7 ай бұрын
By far best reviews on KZfaq!!
@FauxHammer 7 ай бұрын
thanks so much!
@pablofiasco2 8 ай бұрын
thanks again for another great review! the Mono X 6Ks looks tempting, and the price is nice, but i think im still gonna hold off a bit on purchasing any printers
@eugenax9345 8 ай бұрын
I'm holding of for 1,5 years already :D sometimes you just have to pull the trigger. Was a very hard decision between the Elegoo Mars 4 Max (tempered glass protector...) and this, but Faux's video, the dual rail, +50mm height, and the 4 point build plate leveling won the race for me. Hope I won't breach the LCD screen anytime soon :D
@careymilicich 8 ай бұрын
Thanks for the video, I've just ordered this via your link so I hope you get your cut! I was originally considering the M5/s but this should be best for my needs and be a bit cheaper. Thanks
@FauxHammer 8 ай бұрын
This is a good call. I think this is better than the M5s,
@careymilicich 8 ай бұрын
That, and the other major 3D printer companies are reluctant and/or refuse to send to the southern hemisphere backwater that I happen to live in.
@shayne7300 8 ай бұрын
I pulled the trigger on one of these and a wash and cure plus 8 days ago.. Despite no youtube reviews existing when I dropped my coin on it.. Mines due to arrive tomorrow and its my first resin printer.. My main use will be for parts and components for various projects rather than models, looking forward to setting this up now.
@ThatboyWrong 7 ай бұрын
any updates? I'm upgrading from a photon S from back in2019 and as far as im concerned, this is the best price point for features for what im doing.
@kaharthemad 4 ай бұрын
Been eyeing this one. for a while I guess it is time to pull the trigger. Thanks for the great review. Any way to get the US sponsor links moving forward. Would like to give credit for the purchase where credit is due
@Techzal3D 2 ай бұрын
I've been using it for about a month. I only had experience with a Formlabs DLP printer before and changing over to this one was super easy, and I would argue way easier to use. Been using clear, water washable resin and the models look incredible. The fact that its a DLP looks promising for setting up a farm too.
@dalestringer51 4 ай бұрын
I recently upgraded from the PhotonS to the Mono X 6Ks. The fine printing is way better than I am use to. However, the are things I love the PhotonS and wish the 6 Ks had. I may be getting a little picky, but here are the things I think the older PhotonS was better with over the 6 Ks: 1) The PhotonS had the square arm bar. I could the build plate 90 degrees and put it back on. This let the extra resin on the build plate drip down(fairly fast) into the resin pan. You can't do that with the 6 Ks. Maybe I can make an arm attachment to do this again. 2) The 6 Ks build plate top is fairly flat compared to the PhotoS's. The steeper build plate top on the PhotonS helped the resin drip off into the pan below. 3) I miss the three fixed sides and lift-up front on the PhotonS. The 6 Ks top has to be set aside somewhere and I don't have a lot of room. 4) The resin pan hold down screws on the 6 Ks are a pain, since you need to completely unscrew them to get the pan out versus just loosening them up on the PhotonS.
@Periimplantar 4 ай бұрын
Congratulations for the channel, great job! I'm a dentist and what I value the mostly is sharpness and precision in print quality. Between this Anycubic Photon mono X 6ks and de Elegoo Saturn 3, which one do you think would suit me better?
@ArtificerGoblin 8 ай бұрын
Didn't even realize this printer existed! Gotta look into it
@FauxHammer 8 ай бұрын
I like it quite a bit
@richh5038 8 ай бұрын
is there somewhere that shows how you print multiple exposures on the one plate? i love your content. thanks
@Aim4TheHead1 7 ай бұрын
I've been searching for the same thing with no luck
@petercallison5765 8 ай бұрын
About time this was reviewed.
@FauxHammer 8 ай бұрын
Sorry it took so long, it was done a few weeks ago but I had other priority commitments so had to delay the release
@StrangeKvol 6 ай бұрын
When will your resin be available outside the UK (Denmark to be specific)? Love the vids!
@Tee3001 8 ай бұрын
I just got this printer to replace my old Saturn S. Its on sale right now for $289 plus a $25 coupon , so I took the plunge to try it out. I hope its as good as you say.
@FauxHammer 8 ай бұрын
Well, I'm sure you'll be happy. It's a. Great printer. Nice price too!!!
@shotgun2010 3 ай бұрын
They gave me this printer as a replacement for my photon mono x2 that broke. I like it so far. Using water washable resins on it currently. Would you recommend this over the M5 still and what about M5S pro
@sugz865 3 күн бұрын
Hey brother I just wanna say thank u for this video an review on the x6ks I just bought one myself an I'm fairly new at 3d printin but when i bought it i didnt know if i got a good one or not an also better then the m5 which i still havent done any prints on it yet aint got my clean an cure machine too clean my prints with yet but glad too know I chose the best one lol thank u five star review
@FlesHBoX 8 ай бұрын
I would definitely like to try out the wargamer resin.... just as soon as it's available in the US, lol.
@SLYASF_NZ 3 ай бұрын
@fauxhammer Not sure if anyone has pointed this out yet but you have incorrectly calculated the micron size, firstly the axis you stated is 5790 pixels is actually 5760. Also neither 5760 or 5790/195.84=34 nor does 3600/122.4=34 This printer actually has a micron size of 29.4
@Mirek_-ph3xl 22 күн бұрын
Sorry, you are wrong. 3600/122,4 = 29,4 pixel per mm (0,029 pixel per micron), but 122,4mm/3600=0,034 mm per pixel (34 microns per pixel).
@carlosantunezmeza 7 ай бұрын
hi! great video, Just a question here, r u saying that this printer is better than the M5 series because this one is build with better materials? but in terms of microns, the M5 delivers 20 microns against 30 microns on this one, in that terms m5 is better? thanks! I am a new subscriber!
@FauxHammer 7 ай бұрын
It’s better built and the print quality on this is also much sharper than on the M5s too
@Harh1981 8 ай бұрын
Hi, Ross... Watched a lot of your and Vogman videos and became more and more confused considering actual print quality of the new 12K printers. Surely I've noted you have declared a war against ACF film, but then you find out the new Saturn 3 Ultra doesn't produce that kind of blurriness, though Vogman have noticed that specific ACF texture on both M5S and Saturn 3 Ultra both looking the same (alas he was talking more about surface finish than print sharpness). So now I feel a bit stuck - does M5-not-S provide the Saturn 3-non-Ultra print sharpness or not? :) I would just buy Saturn 3 since it has confirmed per pixel print quality (seen on one of the channels recently), have that advanced homogeneous light source, but theese aren't available yet - no, they are, but for a double M5 price, what is not an option. And since you've checked even 6Ks and compared it to the rest of thouse, to summarise it as a set of questions, can you confirm that: 1) ACF film used on M5S is at least visually the same one on the Saturn 3 Ultra? This is to sort out can some specific ACF type can be a source of this problem or can it be the light source; 2) Does M5 produce the same print quality as Saturn 3 since they use the same screen? Or the light source (M5 is obviousely a bit a cheap printer with this LED array) makes the difference? Thanks, Ignat
@FauxHammer 8 ай бұрын
Hiya thanks for watching, let me answer your questions directly. 1, yes the SCF looks visually identical to every other ACF film. 2. No. None of the M5 printers have print quality on part with either of the Saturn 2 printers, or even the Saturn 2 I have a video coming to explain the differences
@Harh1981 8 ай бұрын
Thanks, will look forward your video. Hope to get explained, what is SCF too =) Sounds a bit grim, hope Saturn 3 availability (i.e. prices) will move down to match M5 - now there is only Saturn 2 for that price on Ali :)
@Prickles2001 8 ай бұрын
I'm looking at getting my first resin printer for minis after owning an FDM printer for many years. I'm leaning towards the Elegoo Saturn 3 Ultra with wash and cure station. Is there anything else I should seriously consider instead at this point in time? I don't mind the price. There's just so much stuff out there that it's almost overwhelming lol
@richstokes144 8 ай бұрын
There's the question really: are you looking for something to cut your teeth on resin printing so you can decide if it's something you want do long term or are you looking for a 3d printer to keep long term? Also a lot of this depends on your use case and what you intend to print. As Ross points out in several videos, pixel size is important, but also once you get below 30-35 microns you're really into diminishing returns for most applications. Learning to use Anti Aliasing well and what it's limitations are will give you a better result than dropping to a 20 micron pixel size without AA (in my opinion). If you want a cheap and cheerful printer to try it out, the Anycubic Photon Mono 2 is a great place to start. If you want something bigger this 6Ks is probably also a good shout for it's current price. Both are/will be popular, so getting input from other owners should be easy. And as popular models, they should be relatively easy to move on if you feel like graduating to something fancier.
@Prickles2001 8 ай бұрын
@@richstokes144 thanks for the suggestions. I'm just wary of buying something smaller (and cheaper) to start with, only to then want to upgrade before too long lol.. My plan was to just print mini's like 40K stuff.
@richstokes144 8 ай бұрын
@@Prickles2001 It's hard to judge printed models unless you see them yourself in person. But for my own similar purposes I've found a 35 micron pixel and layer height with good Anti Aliasing to be absolutely fine. You may feel differently. How do you pick a starting printer? That's hard to say, I've avoided Elegoo because their ball joints on the platforms look crap compared to the 4 point system other makes have, but lots of people use them without issue. Acf is crap, speed is not what you're optimising for with minis you're generally looking for a sharp detail so the latest speed printers at £450 are basically as good as a £350 printer from last year for minis.
@FauxHammer 8 ай бұрын
This is overwhelming. I will be doing a video soon. But I think this printer is a solid deal at this point in time. There is a new printer from a big brand coming soon. Maybe in the next month we will hear. I can't say more, but I have a meeting on Monday where I will hear more
@sglhkzp 2 ай бұрын
Hello. Nice videos👌👍👍. The AA, whorks in this printer, using chitubox? I ONLY use chitubox to slice miniatures. Thanks you☺️
@hauleroid 8 ай бұрын
Hey Ross, why are you pouring resing onto the build plate but not straight into the resin rank instead?
@CatEatsDogs 8 ай бұрын
It looks more cinematographic
@FauxHammer 8 ай бұрын
Just because it looks better on camera
@hauleroid 5 ай бұрын
@@FauxHammer thanks, now I can die peacefully)
@inking4517 3 ай бұрын
That tenjin model is so detailed can u share the link where i can get it
@wimvandenhout 6 ай бұрын
Great review, Does this printer do better then the D2 DLP printer. I am looking for an upgrade for technical components. Looking for best tollerances
@FauxHammer 6 ай бұрын
DLP is still more accurate. That’s the benefit of the technology, but printers like the Saturn 2 and mini 8kS are bloomin close
@wimvandenhout 6 ай бұрын
Thanks for the quick response. you confermed my thought i will have a look at the saturn 2 and mini 8Ks but i think it will be the D2@@FauxHammer
@TunneLVisioN42 8 ай бұрын
I don't have access to the video yet but I actually purchased 2 of these recently and there has been a problem with the slicers ignoring "Rest after retraction" times, did you notice this? did you also notice that there is about a 6 second rest after retraction that you cannot turn off in the first 50 layers? I have been going back and forth with an Anycubic engineer, I'll check out the video tomorrow but I am curious if you have noticed these oddities as well? As you probably know Rest after retraction is important for thicker resins and slightly colder temperatures. Besides that the printer has been good.
@FauxHammer 8 ай бұрын
I hadn’t noticed this at all. I found prints to be relatively fast. What slicer are you using?
@TunneLVisioN42 8 ай бұрын
@FauxHammer Currently support in Lychee and slice in Chitu, it wasn't an issue with prints not being fast, it's more that the machine just completely ignores rest after retraction settings, the first 50 layers are always 6 seconds after full retraction until the UV light source comes on and then after the first 50 layers there is 0 rest after retraction, no matter what you set, it is always 6 seconds for the first 50 layers and then 0 after that, I usually use .05s but the backlight comes on immediately regardless after the 50th layer.
@richstokes144 8 ай бұрын
@@TunneLVisioN42 I've just noticed something like this with mine. Using a 1.8 sec exposure and a 1 second rest, the first 50 layers (or rather the balance of the first 50 once it's out of burn in and transition layers) appear like they spend around 8 seconds at the fep, while layers 51 and onward sit at the bottom for about 2 seconds. What initially worried me is that the screen shows the print for the full 8 (ish) seconds, not the 1.8 ish seconds I'd expect. I have the tank on and am reluctant to remove it so I haven't done a check that the light is actually on for the whole of the 7.8 seconds. Have you checked this?
@TunneLVisioN42 8 ай бұрын
@@richstokes144 Thats another weird thing about the machine that I didn't add just so I didn't overload my comment, your observations are correct, the LCD screen is turning on and staying on for a long time during the rest, but, if you turn the lights off in the room where you are printing you will notice that the LCD (which usually indicates the UV exposure has started) is turning on much sooner than the actual UV light does, so that's just another oddity in the mix, not only does the machine ignore rest after retraction, it sets its own extremely long rest for the first 50 layers then ignores any rest after retraction from the 51st on just like you say, this is a VERY important issue especially with thicker resins and less than ideal temperatures, you need that rest after retraction and it's not acceptable that the machines are ignoring it, it's something I'm surprised that wasn't caught, anyways enough tangenting on my part, it's really easy to see the glow of the UV and when it turns on compared to the LCD screen, in all my tests the UV times are activating correctly, the LCD screen just turns on way earlier than the UV source, this is the only machine I have seen to do this, there is a forced firmware time set that cannot be altered by the end user. This is not okay.
@richstokes144 8 ай бұрын
@@TunneLVisioN42 OK, I have found a setting called "Exposure Off Compensation" which is the last option available on the LCD screen while a print job is running. There is no mention of this in the hilariously bad manual for the 6Ks. The option has 2 settings "Open" and "Closed". This appears to be a poor translation for "on " and "off". I set this to "closed" and the printer is no longer adding 6 seconds to the first 50 layers. I'm not certain it's respecting the "Light-off Delay" value from Lychee though, I think it's ignoring is effectively using a zero value.
@jrmh096 8 ай бұрын
Would you recommend this one over the elegoo Mars 4 ultra?
@FauxHammer 8 ай бұрын
Depends if you want the size of this more than you want the quality of that
@Gregatron13 4 ай бұрын
Well I got my Mono 2 working, and now I'm wondering if it's big enough. So now i think I need one of these 😝😂
@MIN3D_reviews 8 ай бұрын
fast print madness is even raiding resin printers, and this one stands besides it looks gorgeous. 34 micron prints are a lot more better than standard resin ones, and reachable price.. it's a good deal
@FauxHammer 8 ай бұрын
Yeah, fast print stupidity. At least in the marketing BS, this generation will upset a lot of new printer owners
@dkev001 8 ай бұрын
I have a M5 standard and its been flawless. Though, I don’’t print miniatures. 1:6 and 1:4 is my preferred scales. Also, Anycubic’s slicer is a long way off from Chitubox and Lychee. That’s just a silly statement.
@FauxHammer 8 ай бұрын
Yeah, at that scale you're very unlikely to notice. And ufvyoure happybwuth your printer, that's what matters most
@trevorliddle9251 8 ай бұрын
That’s good to know. I print at those scales too. I have a Photon M3 and it’s been great but I’m looking for something bigger. Maybe I’ll just go for the standard M5.
@manbroskyrides6559 5 ай бұрын
Lychee is king when it's compatible (for resin at least)
@DanA-eb4ik 7 ай бұрын
I’d love to get some of your resin, but I’m in the US. What’s the next best resin for minis?
@FauxHammer 7 ай бұрын
i liked the Anycubic Craftsman DLP before i made this, but others swear by Sirayatech fast with some Sirayech tenacious mixed in. i never tried it
@Kimkim-gl6qc 9 күн бұрын
I didn't find this info anywhere but can you clarify if Anti aliasing work Mono 6ks? If work, is it both on chitubox or only Photon workshop? Thank you.
@egekose7005 Ай бұрын
Do mars 4 have a better print quality or anycubic x6ks?
@3D_Printing 8 ай бұрын
Flyingbear Revision 2 3D Printer review please; add Klipper and see the speed
@romegarza1138 Ай бұрын
What slicer are you using for this? I keep getting file errors while printing.
@sglhkzp 2 ай бұрын
Does AA works in this printer, when use chitubox? Thanks
@rmfberry261 8 ай бұрын
feel like this hits that sweet spot micron wise. anything smaller its very difficult to perceive
@FauxHammer 8 ай бұрын
Yeah, this or anything around this is fine
@rmfberry261 8 ай бұрын
@@FauxHammer had to edit my comment. I must have had a stroke while writing. Glad you were able to understand what I was trying to say lol.
@rmfberry261 8 ай бұрын
@@FauxHammer question for you. i plan on running anti aliasing. should i over shoot and go for a 20 something micron printer in attempts to preserve some fine detail?
@FauxHammer 8 ай бұрын
@@rmfberry261 Well,what Antoiailiasing helps with is smoothing the edges, when you have smaller pixels, you should not need as much antiailiasing. But anything below 35 um is normally ok with 2xaa and 32x image blur. anything above this like 45 or 50 microns you would be bestter with higher AA When you get down to 20, I still feel that 2xaa and blur is the sweet spot to sogften out every single voxel line. the difference in quality at that level, really isn't muc.
@petercallison5765 8 ай бұрын
Since we can't get wargamer resin Australia, has anyone tried the new Anycubic ABS+ V2? This is water washable with the properties of ABS so it could be very similar.
@FauxHammer 8 ай бұрын
I’ve not tried it. I have their original ABS, when I get some. I’ll try it, but most abs have soft details
@Gregatron13 7 ай бұрын
What resin would you recommend for us rebels?
@FauxHammer 7 ай бұрын
I liked ANycubic DLP Craftsman before we made this.
@enricobononi8655 8 ай бұрын
So the multiple exposures test works only for anycubic?
@FauxHammer 8 ай бұрын
yep. RERF feature (Resin Exposure Range Finder). some other printers have had some odd hack methods to simulate this, but it's janky and requires different exposures of each layer without a plate move. you would need to code it yourself.
@melvin.castro 8 ай бұрын
what is the difference between mono x6k vs mono x 6ks i got x6k recently ?
@FauxHammer 8 ай бұрын
Quite a lot based on the product page, But I never had the X 6k
@akbaragill00 7 ай бұрын
I've been looking for a printer that could fit 8 or maybe 10 or 12 miniature to print😅 my mono 4k can only print so much🥺
@FauxHammer 7 ай бұрын
would be good to go a size up.
@akbaragill00 7 ай бұрын
@@FauxHammer it's either this or the m3 premium, i wish i can see a photo of someone fitting a lot of minis on the build plate tho, just wanna see how well it fits😅
@keiseyku 5 ай бұрын
What's the print speed like?
@Ally_Smudge 8 ай бұрын
When you say the build quality here seems better too (09:23) which printer are you saying has the better build quality?
@FauxHammer 8 ай бұрын
Did you watch from 09:15?
@JohnSullyX 8 ай бұрын
Yes I'm wondering the same thing! Watching from 09:15 . When you say "build quality here seems better too", do u mean the elegoo or the anycubic?@@FauxHammer
@genericgaming4392 8 ай бұрын
Would this be a good first printer for someone starting out?
@FauxHammer 8 ай бұрын
Yeah it’s solid if you have the budget for it. But also check out it’s equivalent for. Elegoo which is the Mars 4 Max
@stonyi2225 8 ай бұрын
@@FauxHammer elegoo mars 4 max they say is over they don't sell anytmore
@ladouceurmatt 6 ай бұрын
Currently have a photon mono x, I’m thinking about getting this printer, will there be a huge benefit of quality when I upgrade to this? Or will it be minimal.
@LOLMEN-vh6lj 4 ай бұрын
It Will be minimal
@roytera 6 ай бұрын
Hi. Got one of these a couple of days ago. About to test it this weekend, but have not been able to figure out how you cut a pease of the RERF file to get room for al 8 on the plate?
@FauxHammer 6 ай бұрын
I used meshmixer to cut it. You can also do it in Chitubox Pro or Voxeldance Tango
@artyomkhromov5363 Ай бұрын
@@FauxHammer can you share your R_E_R_F file?
@abbixaivena1712 5 ай бұрын
Is this printer better than the X2? I noticed on their website that the X2 is "originally"priced higher, so I was curious if their is a big difference in the two?
@abbixaivena1712 5 ай бұрын
I haven't been able to find a comparison between the two. 😅
@peterkiss1204 8 ай бұрын
I wonder how can it produce better results than the M5 as it has larger pixel size and lower contrast ratio (by the datasheet). Maybe the lack of forced anti-aliasing? The build quality seems better for sure. Unfortunately it has somewhat smaller build area. I don't know why people despise the Photon Workshop that much. I'm using it without any issues or major inconveniences. It lost some features from the last version though. The "save scene" function just disappeared (like WTF?) and while the automatic support generating method got much better, the manual editing or placement of them got somewhat weird. In the old version you just saw where will they be placed in real time, while now it generates them at once when you're done with the editing.
@ashleywhitehead3710 5 ай бұрын
Photon workshop is ok. I use Lychee to support and PW to slice. Occasionally, the 6ks will give a bad file error part way through the print causing the print to fail with files sliced with lychee. So I use PW to slice. My only gripe is it so dang sloooooow. Probably because it doesn't support GPU acceleration. Saving the sliced file is just as bad also. I'd hate to try and slice a full build plate at 12k with PW. It would take half a day. EDIT: Just updated to PW 3.2.1 and the slow slicing issue seems to have fixed. Good news. I do actually have another gripe with PW. The lack of being able to set independent lift and retract distances. As it is now D0 and D1 are used for both lift and retract values. Increases the print time by 2 seconds per layer as it is now with my resin profile.
@batuhangok3683 5 ай бұрын
Does anyone have slice settings for this printer?
@ThePiitteri 8 ай бұрын
But is it really so that the X 6Ks doesn't have the Wifi antenna but the previous 6K has?
@FauxHammer 8 ай бұрын
Yeah this is a downgrade to the 6k and an upgrade to the Mono 2 bloody stupid naming
@MrArknova 7 ай бұрын
I'm interested in your settings for the craftsman resin if you dont mind posting it.
@FauxHammer 7 ай бұрын
I don’t post my settings on purpose. Please check my how to print video, this will explain why
@MrArknova 7 ай бұрын
@@FauxHammer fair enough, I printed some tyranids with the craftsman resin but lost my settings and it’s been hit or miss since. Back to the drawing board lol
@Smok1125 5 ай бұрын
Saturn 2(hardly available), Photon Mono X 6Ks or Mars 4 Max? They are in approx similar price. Or is it better to pay more for Saturn 3 or Halot-Mage?
@FauxHammer 5 ай бұрын
Why do people want a Halot Mage, I have no idea who is recommending that trash. AS for Masr 4 Max or X6kS, get whatever si cheaper, the do the same thing at the same quality. Saturn 3 is much better than those.
@Smok1125 5 ай бұрын
@@FauxHammer Some youtubers say its good. Thank you so much!
@timonix2 8 ай бұрын
I am just waiting for a 13", sub 34 micron printer. Aaaany day now. Cmon guys I know you can do it.
@FauxHammer 8 ай бұрын
Well. Maybe a couple of weeks
@RealDaveWinter 4 ай бұрын
7:33 why the hell are you pouring the resin on the top of the print bed? That's by far the easiest way to, not only add bubbles to the resin, but make a hell of a mess too.
@FauxHammer 4 ай бұрын
It’s a secret. I’ve only told some viewers why
@Ugly_Baby_Gaming 8 ай бұрын
so what about the Z wobble as upgrading the rod to a ball screw would cost loads not to mention "IF" being able to get into the firmware even change the step travel.... the Z is most important print quality over the XY res as unless printing a ball or needles XY becomes not too important (so can you tell me dose this 6ks equal the m5, and the Elegoo Saturn 3 ultra with this in mind) I custom built my printer back in 2014 to have laser resin and FDM and CNC the FDM parts are not very good for anything useful unless printing rubber parts or mold making FDM printers are sooo annoying and a real pain to dial in even though I built it to have a laser print volume of 400mm cube I have never even attempted to ever try as I burnt the galvo drivers out that cost the same as a new printer... dam thing is the size of a washing machine would rather just buy a small one to sit on my desk than fafo .... this one is drawing me in as 200 bucks of resin can be bought with the money saved over the 12k printers... don't want the m5s because of the auto level as the 4 bolts are gone on the bed and this giving more problems than it solves.. but I like the look of the Z rail on the m5 and m5s but would probably choose the Elegoo Saturn 3 ultra if going for a 12k drill some holes in the right place move the antenna switches and ports... lets face it if your going to be a mong and drop resin in your house there is no reason the resin wouldn't go down the side and cover the usb slot??? slight angled vertical front mount with a resin splash flap that gets lifted so no chance of snapping the usb when shagging the wife no resin drips so easy to change power lead at the back ALWAYS .... !!! CARBON FILTERS DO NOTHING TO TOXIC AIR !!! they only remove smells
@FauxHammer 8 ай бұрын
I'm really sorry I tried reading that several time sand I do not understand what you are actually asking.
@Ugly_Baby_Gaming 8 ай бұрын
@@FauxHammer lol bit of a rant. just on about customizing really sorry lol
@FauxHammer 8 ай бұрын
@@Ugly_Baby_Gaming ok no worries, just wanted to be sure I wasn;t missing an important question. Feel fre to rant.
@fpsVAMPZ 6 ай бұрын
I can't get anything to stick to the build plate. Can't figure it out.
@RealDaveWinter 4 ай бұрын
Sand the build plate. Nothing sticks to shiny, so if your build plate is perfectly smooth, use sand paper on it to rough it up. You'll increase the surface area for the resin to adhere to but about 10x.
@AwSmMascaraXx 4 ай бұрын
Elegoo 4mars max or anycubic photon mono x6ks? Same price
@FauxHammer 4 ай бұрын
This is taller if that matters. but that's about it in terms of difference
@FuriouseMiniatures 8 ай бұрын
@FauxHammer your links arent working can i get some working ones?
@FauxHammer 8 ай бұрын
geni.us/MonoX6Ks Should be working? It will send you to the main Anycubic store or the Germany/France store if you are from one of those countries. What are you seeing?
@slyfawkes7772 8 ай бұрын
And we're positive that the sharpness of print quality is largely an attribute of the printer's, and not the resin's merit?
@FauxHammer 8 ай бұрын
Well, resin is always more responsible for sharpness than any printer. But I use a resin which is intentionally quite sharp to show off the best the printer can do with more realistically used resins
@jacdimond 7 күн бұрын
Fauxhammer. After 5 prints with ultra tough resin in black, ive only managed one actual print, the rest havent even stuck to the plate and printed.Wondering if you could a brand new printer guy out? Losing my mind a little 😅.
@FauxHammer 7 күн бұрын
Yep, watch my “how to print miniatures video, then my guide to Chitubox and Lychee settings I posted last week. My guess, your base exposure time is wrong..
@Lurker1222 7 ай бұрын
Just picked this up as my first resin printer for $279 on amazon free shipping. Did I win the game?
@FauxHammer 7 ай бұрын
well, i just lost the game since you mentioned the game...
@OCybress 5 ай бұрын
Damnit!
@3dPrintingNederland 16 күн бұрын
Almost. I just got one for $257 including shipping 😮
@DiavloPL 8 ай бұрын
Anycubics naming convention and flooding of versions put me away from it. I've started with first Photon, but I'm now Elegoo client. I just really do not accept anycubics confusing, overcomplicated, overpopulated range of printers.
@FauxHammer 8 ай бұрын
Well, the Mars 4 line? Including the Mars Mate, which works with more Saturns than marses…
@DiavloPL 8 ай бұрын
@@FauxHammer hah fair point, but still Anycubic wins confusion competition.
@endscreen1shorts478 Ай бұрын
5:50 wow, congratulations, it's the first time I see someone thinking that way, how did you calculate it, is there a calculator, I'm interested in my m5s pro to calculate, is this confusing me, you chose 30 micron layer high, closer than 34 micron pixel size , then why didn't you choose 34 micron layer high, does that sound more logical to me than the 30?
@FauxHammer Ай бұрын
Because most stepper motors have an accuracy of 10um, or so the marketing tells us
@endscreen1shorts478 Ай бұрын
@@FauxHammer and I ordered anicubic 14k pro, instead of watching your videos before I ordered it, I ordered it because I want to get small details on the 3d model, now I have to change the fep film, I'm sorry that I didn't watch your videos before I should have taken saturn 12 k, I found many 3d models on the internet that were printed with saturn 12 k and they look awesome, and do you know how many I found from anycubic 14 k? zero, I guess they won't send me 2 kg of free resin for quick printing, will I throw them away, I don't understand the point of quick printing at all if you lose half the details on the 3d model, and why that stupid film for quick printing, I'm totally disappointed
@SophiaNix69 2 ай бұрын
Is this printer really better than the M5?
@FauxHammer 2 ай бұрын
In print quality, yes
@privat9605 8 ай бұрын
The math in your video is wrong, isn't it? You're saying to take the X or Y print area measurement and divide it by the pixels on the same axis. But on the screen you're showing pixels / measurement.
@FauxHammer 8 ай бұрын
Yeah sorry. Ooops. I hit it right in Excel. But its harder to do in video.
8 ай бұрын
I want to play warhammer fantasy 7th edition but can't afford it so printing them sounds like a solution but i checked out myminifactory for a while to build a skeleton army as my first 500 points but couldn't see.. Anyone know an artist that makes warhammer fantasy vampires, ghouls, skeletons etc?
@FauxHammer 8 ай бұрын
Thanks for watching, Sorry but i don;t encourage direct Warhammer prints or shares to be on thsi page. but You can find a ton of Undead proxies on My Mini Factory,
@ki777iz 8 ай бұрын
Can I use my mom's credit card?
@FauxHammer 8 ай бұрын
yes you can. but i recommend don't.
@luxferre5546 8 ай бұрын
6:53 Dafuq?!? What the hell is going on? 50 £ for a bottle of water?
@FauxHammer 8 ай бұрын
Hmmm, printing models?
@luxferre5546 8 ай бұрын
@@FauxHammer The supports dude they are sweet as strawberries. Sometimes it can get very frustrating with the supports but I`ve never seen any supports that go smooth like this. You just picked the model right outta there. Amazing
@FauxHammer 8 ай бұрын
@@luxferre5546 Ummm, makes me worryu who you;re buying your models from lol
@Fatpumpumlovah2 6 ай бұрын
why would i buy via your link when its 299 on amazon?
@FauxHammer 6 ай бұрын
Wow, it's like you're having a go at me for a video that was release months ago before it was available on Amazon and I didn't know it's since been added.
@Fatpumpumlovah2 6 ай бұрын
@@FauxHammer really bro? its been on amazon for months at that price, wtf u talking about?
@FauxHammer 6 ай бұрын
@@Fatpumpumlovah2 Mate, what is your damage? Who hurt you? I make the video. Put the link in that is available at the time and then I very rarely look back. What are you complaining about? Do you just like to complain? I can put an Amazon link in here too and also make a commission. I just didn't because I didn't know and never thought about this ever again to go back and check... You got it cheaper on amazon, well done mate. You could come here and go, Hey Just FYI, this is cheaper on amazon and that would be viewed as a helpful comment.
@Fatpumpumlovah2 6 ай бұрын
@@FauxHammer wait, are you melting? is works killing you? It was a question!!! probqably saving many extra 99 bucks eh!? calm down.
@chuck2703 4 ай бұрын
You're on the man's channel complaining about how you can optionally buy it through the link.
@SgtHouse 8 ай бұрын
Why? Why must we wait 4 days? Why must you tease us??? 😢
@catnamestaken 8 ай бұрын
Another hmmmmm
@FauxHammer 8 ай бұрын
Remind me what the last one was again
@catnamestaken 8 ай бұрын
@@FauxHammer it was the comparison of the saturn ultra and normal variant and in the comments just printers in general
@ogthebarbarian641 4 ай бұрын
The 6ks was by far the worst and most frustrating printer I ever bought. I own both the Mono X and the Mono X 4k and neither of them gave me the headaches that the 6ks did. After 4 months of Anycubic after sales support and going through the Anycubic wiki for troubleshooting with a fine tooth comb it has delivered NOTHING but uninterrupted failures and wasted resin. Do not buy - it's a piece of sh*t.
@shotgun2010 3 ай бұрын
Not had a single failure with mine compared to photon mono x2 it's better. Sounds like you have exposure or temperature issues.
@trepapormipija4041 8 ай бұрын
Hi! I'm undecided between Elegoo Mars 4 Max 6k and Anycubic Photon Mono 6ks, Which one should i buy being my first resin machine?
@FauxHammer 8 ай бұрын
Honestly, whichever one you like. Both are great printers. Neither delivered better quality.
@stonyi2225 8 ай бұрын
in viet nam elegoo they say no sell elegoo mars 4 max anymore and they say is OVER for this Mars 4 max
FauxHammer
Рет қаралды 121 М.
Why Are THESE Amazon's BEST Selling 3D Printers? Anycubic Photon Mono 6Ks vs. Creality Halot Mage 8K
Elevated Systems
Рет қаралды 26 М.