AODE 4R70W Class part 1 lesson 4

No video

AODE 4R70W Class part 1 lesson 4

Рет қаралды 298,325

Transmission Bench

Күн бұрын

Removal of the drivetrain and final video of Part 1

Пікірлер: 77

@user-in5xf8pf7e Жыл бұрын

Thanks for people like you let others knows how rebuilding transmission excellent teacher

@aslant9246 Жыл бұрын

thank you for sharing your knowledge and expertise in these video series. you are a talented instructor

@juangarcia-ds2up 6 ай бұрын

Idioma español

@jasont1917 6 жыл бұрын

Excellent videos. Just a few pointers.... use different gloves as the gloves you are wearing in parts of your videos drops tiny fibers into the transmission. Also when you put the bolts in the box for newbies try and not mix the bolts togeather as may cause confusion later. You can put some of the bolts with the parts you disassembled. You are an excellant teacher and i enjoyed the videos. Thank you for your time and knowledge.

@brianlee9310 Жыл бұрын

He's old school lol

@Elcapulove Жыл бұрын

Good morning family and good health to everyone especially MENTAL. Sr. Thank you very much for the valuable information and for your time. REALLY, THE BEST VIDEO💯❤️

@abdulhassan1107 3 жыл бұрын

That was epic. Years back, I bought a DVD that shows all that stuff but yours is a lot better.. more detailed and informative. Thanks a lot!

@donreynolds5233 9 жыл бұрын

wow thank you for making this series, it's an incredible resource

@ricky-ericon8311 Жыл бұрын

Thank you just like back in the days when I was In school I still remember those classes. Great video

@perverso12345 9 жыл бұрын

i always was interested in transmissions .and to be honest i dont have any experience .but this videos have give me the courage and the confidence to open one .thanks for all your work .

@transmissionbench7842 9 жыл бұрын

perverso12345 Thanks.

@khansamasood2713 7 жыл бұрын

adoye

@khansamasood2713 7 жыл бұрын

perverso12345 s

@khansamasood2713 7 жыл бұрын

sdyoe

@khansamasood2713 7 жыл бұрын

awefoi

@michaelromer2016 6 жыл бұрын

Amazing video series! If anyone is missing the anti-rattle device seen @ 6:00. The part number is YL3Z-7A609-AA

@macgyver15147 3 жыл бұрын

The Bob Ross of transmissions

@lorilacendre2917 6 жыл бұрын

THANK YOU SO MUCH I HAVE LEARNED TO TAKE IT APART AND FIX MY OWN TRANS

@tommygreist9560 6 жыл бұрын

I love your very descriptive and educational videos,Thanks.

@JuanHernandez-re5ek Ай бұрын

Thank good teacher nice excellent intruccion to yhe people.thank good work. Said juan look hete now..

@royrocha4608 2 жыл бұрын

This is so helpful, loved it and made it easy to follow two thumbs up

@jeffhurckes190 9 жыл бұрын

The two threaded holes on this pump are of a larger diameter than the corresponding threaded holes in the case. You can use 2 bolts and walk the pump off, just like you would a brake drum.

@user-lb4yi8gf4k 6 жыл бұрын

Jeff Hurckes Hallo

@josedominguez2021 5 жыл бұрын

I love craftsman tools...

@1991tommygun 7 жыл бұрын

i think I might give this a try on my p71 crown vic thanks

@melvinlaurindo910 9 жыл бұрын

Thanks for the videos. Please put lesson 2, parte 1. I'm anxious. :)

@transmissionbench7842 9 жыл бұрын

I am finishing up the video now. It will be uploaded in a few hours. Thanks for waiting.

@TheChristopher042 6 жыл бұрын

Hey James, just wanted to say I love your videos. I watched and rebuilt my first 4l60e with your help. Many thanks. Just wondering if you have a future video in mind on the ford c6? thanks

@luisvelasquez9191 5 жыл бұрын

*_Muy buena la información ,gracias_*

@MrDraftkid Жыл бұрын

Man this guy is awesome

@LazyHerooo 6 жыл бұрын

So real happily sharing knowledge

@TheBigBruski 4 жыл бұрын

I rebuilt my 4R75E following these instructions. Everything went great until I had major slippage in reverse gear. I'm kind of at a loss...

@daileydriven 2 жыл бұрын

Based on my limited scope of knowledge, it sounds like maybe a seal was damaged upon installation.

@TheBigBruski 2 жыл бұрын

@@daileydriven yeah I blasted it apart and the reverse seal he made a big point about wasn't seated properly. So I was able to get it to work properly after that. Absolute best feeling in the world to make it work again!

@jeffharoldson6984 10 ай бұрын

Wow So you went back inside it all way to the reverse?

@1991tommygun 7 жыл бұрын

This is great so professional

@inxtics 4 жыл бұрын

Great video man keep up the good work!

@WayneHarropson 9 жыл бұрын

OK, Now I'm ready for part 2 lesson 1....

@transmissionbench7842 9 жыл бұрын

I just finished the script tonight. I start on the video in the morning. It's a about a 30 minute lesson.

@khansamasood2713 7 жыл бұрын

Transmission Bench afyoo

@Turboboob 2 жыл бұрын

Probably the easiest transmission to repair and have good results after… simple compared to a 48re

@alexisquintanilla9173 9 жыл бұрын

Very good explanation

@peeplesdevon 9 жыл бұрын

great video. could a bad reverse band cause sudden loss of reverse engagement? I can only back my truck about 6 inches in 4low using high rpms on level ground. There is a drop in idle but no "clunk" when I put it in reverse. Everything else acts like it should.

@Zeb-Scott 2 жыл бұрын

You're a genius!

@juanarevalo-wp4iv 8 ай бұрын

Thank you

@YourName-vh1nu Ай бұрын

Ny transmission didn't have that steel spring damperner and I can't find it anywhere

@erickfigueroa7399 3 жыл бұрын

Quick question, I’m working on a 4r75e and the pump to case has a spring return cage but I noticed that the cage was pretty bent up. I’ve been looking everywhere for one but can’t seem to find it, would you be able to point me in the right direction?

@juanarevalo-wp4iv 8 ай бұрын

Good

@2kbluedragon 3 жыл бұрын

thinking about trying this does this also discuss torque converter replacement ?

@lilianamargaritavazquezflo1992 2 жыл бұрын

Cómo poner los dicos y separadores de trasmisión

@2011godfearingman 8 жыл бұрын

Is there an attachment for the slide hammer I can buy somewhere that'll pull the pump?

@kas0016 4 жыл бұрын

I know it's late but u can use a seal puller against the bolt head

@kirkewing7812 2 жыл бұрын

Hello I have a question how do I get to the very first part?

@lonamathews6836 3 жыл бұрын

Will the aode. 4R70 WE. 1984 Work in 68 mustang 289?

@angelrosario9937 5 жыл бұрын

gracias

@albertojimenezarcos3535 Жыл бұрын

Hablas español quiero aprender ese trabajo

@premixedgandhi 8 жыл бұрын

Would the pump be able to slide in flush if any of the friction plates weren't aligned?

@MrUbiquitousTech Жыл бұрын

@alanvillanueva4541 3 жыл бұрын

I have a 94 f150 aode transmission and it dosent have the Spring steel

@scottiusnevious5143 4 жыл бұрын

I think my od band os slipping too. Seems to happen alot.

@alanhardman2447 3 жыл бұрын

Where are the 1 - 3 lessons?

@dagbye990 3 жыл бұрын

Is Part2 available?

@ussraven61 4 жыл бұрын

Anyone know what size metric bolt that is he used to remove the pump?

@Goldchannel12 4 жыл бұрын

Raven61 you can use the bolts that come off the tcase

@brutallyhonestmf5578 9 жыл бұрын

thanks for your videos! whats the name of the small part shown at min 6:00 my transmision is missing that part. thanks again :)

@transmissionbench7842 9 жыл бұрын

It's called a "silencer". It limits a slight little rattle of the the friction and steel plates. If your transmission does not have it, you'll be fine without it.

@brutallyhonestmf5578 9 жыл бұрын

thank you so much. looking forward for the next video on the series! PD I found a broken planetary and sun gear as well as a burned od band in my transmision any idea what can cause this?

@transmissionbench7842 9 жыл бұрын

Broken planetary gears are usually caused by a failed thrust bearing . The little needles come out of the cage and end up getting between gear teeth. Not pretty.

@brutallyhonestmf5578 9 жыл бұрын

weird cant find any bad thrust bearings, I was thinking that the issue was caused by the tc bcz the reason why I take apart the tranny was a malfunction between od and d. At around 45-50mph when you let off the gas the tranny start to downshift like jumping between 3-4 and then after a few times doing that it start to make a grinding noise even on reverse. Im going to install a rebuild tc and new solenoids anyway just in case thanks for any advice :)

@brutallyhonestmf5578 9 жыл бұрын

youre completely correct I check all other 7 thrust bearings but I didnt check the one inside the planetary and is blown in pieces thank you very much !!! can thank you enough!

@stipple5549 9 жыл бұрын

so i cant fine the "Small Spring Steel Part" at *6:02 in video where can i get another one??

@transmissionbench7842 9 жыл бұрын

Hi. The truth is, the transmission will operate just fine without it. It dampens the somewhat faint but detectable sound of the mechanical diode in applications such as the Town Car.

@frankramirez8029 8 жыл бұрын

+StippLeTV TV If you are a perfectionist like me, you want to put that part in even though transmission bench says it is not completely necessary. My tranny didn't have the part either. But I found it for sale at fordparts.com for $8.32. search for "Auto Trans Intermediate Clutch Anti-Rattle Spring". Also found it on ebay for $18.85. search for "INTERMEDIATE CLUTCH ANTI - RATTLE SPRING".