Apple Watch Series 3 Battery Replacement

Рет қаралды 87,334

Күн бұрын

Step-by-step repair guide how to change dead or worn-out battery in apple watch series 3. If the watch draining fast - you need to replace the battery, you can do it yourself according to the video instructions.
Buy tools and parts on AMAZON:
Screwdrivers set: amzn.to/2Dp1Rcm
Opening tools: amzn.to/2Zcwmdo
Magnetic Mat: amzn.to/2Rw4G2w
Tweezers: amzn.to/39rWix5
Glue B7000: amzn.to/3y2O5ZF
Battery: amzn.to/3aSLSqn
ALIEXPRESS:
Screwdrivers set: ali.pub/302o00
Plastic Pry Tools: alli.pub/6dhrz1
Tweezers: alli.pub/6dhrts
Battery: alli.pub/6dhrku
Force Touch cable: alli.pub/6dht1j
Glue B7000: alli.pub/6dkgeu
More photo and video guides on our website: www.how-fixit.com/
FOLLOW ME:
Instagram: / howfixit
Facebook: / howfixit
Twitter: / howfixit
** Why my Apple Watch Battery Draining Fast **
After a while, the battery in the Apple Watch Series 3 worn-out due to daily use. Unfortunately, there is no way to fix battery wear and tear, and the only solution left is to replace the battery with a new one. This repair process takes about 40 minutes and requires caution for the device, the main thing is not to rush and follow all the step by steps.
*** DISCLAIMER ***
This video intended for general information only. We will not accept any liability for damage or injury caused while following this guide. Any reliance you place on such information is therefore strictly at your own risk. This video description and commentaries contains affiliate links, which means that if you click on one of the product links, I could receive a small commission.
*** AFFILIATE PROGRAMM ***
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
#howfixit #howtofix #repair #applewatch

Пікірлер: 33

@ControllerSupported 10 ай бұрын

I had a few moments of holding my breath and nervousness, but between the Ifixit kit, and this video, my watch is back to life again! Thank you so much!

@batman1169 4 ай бұрын

How is it in the water ❤

@Arrsiix Жыл бұрын

Solid, straight to the point, informative 👍 good content man. Keep up the grind.

@brad6742 8 ай бұрын

The triwing screwdriver provided w/ my battery kit stripped when attempting to loosen the battery screw. Also, I don't think you need to remove the screen cables on the gen3 watch. I'm ordering a 0.6 mm Tri Wing Screwdriver for $3 bucks on ebay, I'll get back to you if it works or not. Update: The "Y 0.6 mm Tri Wing Screwdriver" perfectly fit the battery screw. Watch is now charging the new battery! Hardest part was aligning the 3M adhesive on the watch frame, once the paper backing was peeled off. In this video they forget to peel off the old adhesive and just put glue over the old one lol, I recommend peeling off the old one and getting the 3M adhesive, which is probably what apple used originally.

@raiderman28 Жыл бұрын

great work, great video. keep up the good work.

@adrianodasilva2917 Жыл бұрын

Thanks guys this helps me a lot..❤

@brigittaforray2582 9 ай бұрын

Thank you for this informative video. Thanks to you my watch is up and running again. Thank you!

@wanaraz Жыл бұрын

Why did you disconnect those 3 connections. The battery would have come out without doing that right?

@katherinewilson7937 Жыл бұрын

I thought exactly the same thing. There was no need to remove the LCD and digitiser. That he or she did it twice is entirely nonsensical! It's just adding unnecessary steps and complexity. Same with using the tape - he or she should know that replacement batteries come with their own adhesive built in on the underside of the replacement battery... It's almost as if the person wants to show off that they're adept at removing and then reattaching the 3 connections. Crap video to be honest!

@wanaraz Жыл бұрын

@@katherinewilson7937 LOL. Highly critical today I read. LOL

@Interlocutor_ 7 ай бұрын

@@katherinewilson7937 Replacement batteries don't come with their own adhesive. Also, removing the LCD ensures that you don't damage the ribbons or connectors during replacement. Leaving the LCD in would leave you with very little room to work with. You'd have to be some kind of fucking idiot to do or think that way :)

@lucreziamattei8495 4 ай бұрын

Once you have replaced the battery, the battery health in the settings’ll be restored to 100% or not?

@cagasburafantastica4027 Жыл бұрын

nice vid man, keep going, love from italy❤️

@DBRising 5 ай бұрын

I wonder if that black battery adhesive is available somewhere.

@anon.3486 Жыл бұрын

Random q - when I power it back on after replacing the battery - would the existing data still be there (ie any not-yet synced data)?

@brad6742 8 ай бұрын

yes

@youarehere1251 4 ай бұрын

Will do this after I retire.

@ReneaDooserider Жыл бұрын

Where can i bye parts needed for this?? Also id like to take repair classes for apple. Im in vancouver wa. Any help would be great. Thank you.

@kan-a-nekboonin8662 6 ай бұрын

thank you so must!

@gwenhutson Жыл бұрын

Thanks!

@howfixit 9 ай бұрын

Thanks for your support !

@user-te6nk3cg4k 11 ай бұрын

My watch saying low battery please continue to charge how to fix this ?

@mm2clips792 Жыл бұрын

I want to know if my apple watch has a defective battery because ive only owned it for 4 months and the battery health is at 95%. My friend bought the same exact watch 3 months before i did and his battery is at 99% health so is mine defective?

@user-nf4hi5lc6i Жыл бұрын

بتاكيد

@ReneaDooserider Жыл бұрын

How do I check the battery health of my Apple Watch Series 3? Open the Settings app, then tap Battery. Your current charge level

@user-nf4hi5lc6i Жыл бұрын

@@ReneaDooserider all, Diana, Hannah Talbot, Paris

@gwendolyncarson6127 10 ай бұрын

Screen can seperate into 2 pieces , the dark ring and then the center piece😮

@DB-ho3ux Жыл бұрын

Screen stopped working after trying this modification. Watch vibrates when trying to turn off. Might have pinched the ribbon cable the wrong way when re-installing. Thoughts?

@screen-protector Жыл бұрын

Ribbon cable missalignment mostlikly. And, this job is not for everyone ;). I can't recommend it to anyone with not taking a risk into account. Only when you do these things for some time, you know your way around.

@brad6742 8 ай бұрын

don't remove the ribbon cable, only the battery cable needs to be removed during battery swap

@lukehunter668 5 ай бұрын

@@brad6742which is the ribbon cable?