Gas Dryer Repair: Fix Heating Problems

Рет қаралды 2,045,371

Күн бұрын

Whirlpool Built Gas Dryer Repair, Troubleshooting Heating Problems. This video looks at how to troubleshoot and repair problems with your whirlpool built gas dryer. Repair dryer not heating, dryer taking a long time to dry, dryer too hot. Whirlpool built dryers are easily recognized by the lint catcher or trap located on the top of the dryer. This dryer repair video will show how to troubleshoot and fix problems with your dryers gas valve, dryer igniter, dryer valve coils, dryer flame switch, dryer thermal fuse, dryer cycling thermostat, dryer hi-limit thermostat, dryer timer, dryer temperature switch, as well as ducting problems, and other heat related gas dryer problems. Whirlpool gas dryers are built under the names Whirlpool, Roper, Estate, Kitchen Aid, Inglis, Amana, Maytag, Kirkland, Kenmore. I hope this helps you fix your dryer. More appliance repair help videos at applianceassistant.com/Dryer-...
For proper appliance repair training I recommend training.fredsappliance.com

Пікірлер: 861

@robroberts2064 5 жыл бұрын

If you can handle a multi-meter this is hands down THE BEST dryer explanation video. Many thanks!

@brusharp 5 жыл бұрын

Your comment about the solenoid coils failing slowly while allowing initial burn was right on the money. Odd symptom, spot-on diagnosis. Dryer fixed in two hours, including trip for parts. Thanks a million.

@irvingsantiago6701 Ай бұрын

Attention to detail and listening with patience has its rewards. Thank you for the instructional clarity.

@mma7120 5 жыл бұрын

This video helped me solve a strange problem I had after replacing the thermal fuse and cycling thermostat. I had no voltage to the igniter because I had the wrong wires connected to the thermal fuse. I saw this error when I looked at wiring connections in this video. Thanks for posting it

@applianceassistant 12 жыл бұрын

My pleasure, I'm glad it helped! Thanks for taking the time to comment!

@ashinteractive 11 жыл бұрын

Thanks so much for posting this! You saved me time and money today, and those are 2 commodities that I hate to waste! I spent $17 and a couple of hours of my time to get our dryer back up and running, rather than waiting a week for a $60 maintenance call plus any parts and labor afterward! I love it when things like this work out, thanks again!

@redsnakehead 2 жыл бұрын

Eleven years later, still helping folks. Thank you sir!

@vincezing4607 6 жыл бұрын

This is a great video. Was doing research on why my Whirlpool Duet gas dryer wasn't drying my clothes. Was difficult to determine the defective part without an ohm meter. The burner pilot would turn on and the flame would ignite but on the second cycle when the pilot turned one flame would not ignite. This video helped me identify the coil solenoid. Replaced them for $10 and good as new.

@applianceassistant 11 жыл бұрын

Thanks for taking the time to comment! I'm glad it helped!

@tylerpowell6428 4 жыл бұрын

This was PERFECT! My igniter wouldn't glow and once I replaced the thermal fuse, we were back in business! Thank you so much for the excellent instruction that made this fix cheap and easy!

@applianceassistant 11 жыл бұрын

My pleasure! Glad it helped. Thanks for the comment!

@applianceassistant 11 жыл бұрын

Thanks for the comment! Glad it helped!

@loragen1 Жыл бұрын

I agree with the prior complements. It is so refreshing to see a clear and complete tutorial that provides exactly the information that the title claims, without the usual sales or personal publicity motives. Also, the explanation as to why there is an internal heating element inside the four-wire cycling thermostat is the first of all the many KZfaqs that explained this and got it right. Thanks!

@applianceassistant 12 жыл бұрын

Glad I could help! Thanks for taking the time to comment!

@applianceassistant 11 жыл бұрын

Congratulations on your successful repair! It's a wonderful thing when a plan comes together! Thanks for the comment!

@702ringo1 7 жыл бұрын

Excellent explanation on how a gas dryer works and how to properly read and interpret wiring diagrams. Wish you'd been my teacher when I was an apprentice many years ago. Thanks, this is going to help a lot of people properly diagnose and troubleshoot their problems with their dryers.

@applianceassistant 11 жыл бұрын

My pleasure! Thanks for the comment!

@acer372 7 жыл бұрын

yep watched this and fixed the gas valve coil solenoids 30 minute repair on my admiral 5 cycle thanks works great now

@dmperfection 3 жыл бұрын

Wow! This is by far the best all-in-one dryer help. Thank you. Easy to understand, good pace, the voice is reassuring, and makes what I thought was difficult to understand, quite frankly, simple. Thank you very much. I'm sharing with anyone I know.

@Jason-iy8zt 7 жыл бұрын

I bought a multimeter, diagnosed the fuse, replaced it...so easy. Thanks for the video!

@memo1975 4 жыл бұрын

Most comprehensive video I've seen yet, very thorough and well produced - easy to follow and no yakking. Thank you!

@Rabbit.760 3 жыл бұрын

Still a nightmare to deal with 🤣

@djranlove 3 жыл бұрын

THANK YOU SO VERY MUCH! I replaced the gas valve solenoids less than 24 hours ago but the problem persisted, but thanks to your video I realized the dryer was set to "Cool Down" therefore it wasn't heating up. You saved me a lot of time and the unnecessary replacement of parts that were functional. Thanks again!

@applianceassistant 13 жыл бұрын

@mondays89 Thanks! I'm glad you liked it. This project isn't paying very well so far, so its a big encouragement to hear that you found it helpful. There is a lot of other electrical and mechanical fundamental information and help at my web site. A link is in the description to this movie. That foundational stuff is very important, and when it is clear and well understood repair work becomes fairly simple. Thanks again!

@JohnPaulIto1 5 жыл бұрын

Best video I found on this topic, thanks! On replacing solenoid coils, two extra details would help -- the three-prong one in front should have the wires low, the two-prong in back should have them high; and there's a protrusion on the top of each coil that goes in a hole in the cover, easiest to line up if the cover goes on the coils first, then the whole thing back in position.

@applianceassistant 11 жыл бұрын

Thanks for the feed back Steve! Congratulations!

@MVMike62 5 жыл бұрын

Great video. I've changed many igniters, belts, a set of valve solenoid coils, a timer, and a squirrel cage fan but never a Thermal Fuse. Thanks for the tip on checking there. With no volts at the igniter I went straight there and sure enough !! Open fuse. $5 later, she was good as new again.

@applianceassistant 12 жыл бұрын

That's wonderful! Thanks for the comment!

@darajane1748 6 жыл бұрын

Great Job with this. Tested the coil valve one was bad replaced them myself and works like a charm. No huge bills, just new coils. Bonus was able to clean out the inside of the dryer, found 20 bucks worth of change a few earrings, 2 broaches, a 10 dollar bill, and assorted other treasures.

@staceybaima2279 5 жыл бұрын

This is probably the best overall video I've seen to troubleshoot a gas dryer. It's all encompassing and step-by-step. We just figured out the issue with our Kenmore Elite H3 is the gas solenoid valves. Getting parts tomorrow! Thanks!

@applianceassistant 11 жыл бұрын

Good find! Thanks for the comment!

@DayClanTribe 11 жыл бұрын

Absolutely one of the best instructional videos I've seen for the DIY'er! No nonsense, straight to the point, sequential investigating and top-notch editing and production. This is a 10 in my book. Hope to find more like it for other appliances. Thank you!

@justanotherproject2day Жыл бұрын

Excellent video! Reading the comments I learned to check continuity of each component before disassembly and replacement. Opened up the dryer and tested the main components which were all good. In the end, some critter had crawled up the exhaust pipe and created a nest causing air flow resistance. Outdoor washer/dryer. Cleared and cleaned the exhaust pipe and it ran like new!! No replacements needed. Start with the simple things first!!

@PrattMadeThat 4 жыл бұрын

Great video, saved me the cost of a repair man! I had a big ball of lint stuck in the duct and it popped the thermal cutoff. Lesson learned I need to clean my duct more often. Anyone reading this, don’t be afraid of the “advanced troubleshooting”. In conjunction with the video, I went to there website to do a little reading and it was all very clear what worked and did not work using a multimeter.

@mmvogel1207 13 жыл бұрын

Appliance assistant, you guys Rock! I researched the symptom in your comments and matched it up to my issue to the "T", and followed your great video advice and replaced my coils. The problem fixed with my two year old Whirlpool gas dryer. Thanks for the advice.

@kentfitzsimmons6872 6 жыл бұрын

Thank you so much for the video. So, when I checked the thermal fuse with the multimeter nothing happened. No reading. Bad fuse. I get it now. I bought one in town and put it in. I used a multimeter for the 1st time and fixed my dryer. God bless you sir. You are helping people with your gift. Good things will come to you. :)

@applianceassistant 12 жыл бұрын

@BasicBeatMusic Thanks for the comment! Glad I could help!

@martinlopez807 5 жыл бұрын

Best video. My problema was no heating it all and whit this explanation find out the fuse was bad .. Fuse cost me 10.85 Dlls Cheap in easy 😉

@plumeriafarmer20 8 жыл бұрын

Thank you for a great video and explanation. Changed my coils, problem solved, About n 1 hour of my time to open the dryer, diagnose, remove the bad coils, go to the appliance store and get new ones and reinstall. $26 probably saved me $200 in serviceman repair labor cost.

@stevensabeh6852 5 жыл бұрын

This is by far the best fix it video. Very detailed and step by step troubleshooting. Excellent. Thank you

@applianceassistant 11 жыл бұрын

Your welcome! Thanks for the comment!

@pgltunk62 8 жыл бұрын

This is the best video on fixing your gas dryer. I have never worked on a dryer before. I barely know how to use a multi meter. Followed the instructions in this video right down to pausing it to see the settings on the multi meter shown. Fuse ...ok. Igniter...ok. Flame switch...open circuit! $15.00 later, dryer is fixed! Awesome! Thank you very much.

@applianceassistant 11 жыл бұрын

Good for you! Thanks for the comment!

@mikeg8028 6 жыл бұрын

Thanks! My Kenmore Elite gas dryer wasn't heating. After looking at various online videos (not this one) and repair guides and suggestions online, I replaced the fuse, the igniter, and the high limit thermostat, and none of those solved the problem. The igniter still didn't light up. I checked the flame sensor for continuity and that was fine. Finally, after watching this video, I saw in the repair manual that came with the dryer that there was also a heater relay in the circuit. Once I found that part on the dryer, I realized there was also a motor relay, and they were the exact same model. I swapped the two and the igniter worked (I had to hold down the start button because now the motor didn't stay running). I installed a new relay and now I have a working dryer again. I wish I had started with this part, but at least the dryer is fixed!

@applianceassistant 12 жыл бұрын

Thank you for making that point! The drum does need to be in place for the blower to properly draw the heat away from the hi-limit thermostat which will kick the burner off after about 10-15 seconds if the duct is clogged or the appliance is open not allowing the blower to pull heat. Sorry I didn't make that more clear! Congratulations! Thanks for the comment!

@tonykaphan6855 7 жыл бұрын

Simple, straightforward video that guided me through the diagnostic procedure I needed to fix my own clothes dryer. I was able to fix it myself and for only $25 including shipping! Thanks so much for the help, you likely saved me and my family hundreds of dollars!

@robertakerman3570 2 жыл бұрын

Best explanation yet!

@relin1995 10 жыл бұрын

As a 52 year old women I am used to doing things myself but never attempted anything like this. after watching your video, I was able to pinpoint the ignitor. got one online for $20 dollars and replaced and all was well. thanks so much for making your video so easy to understand. I hate to pay for repair people who charge so much just to walk in your door. You saved me so much money and the repair was not hard at all. thanks thanks thanks!

@johnblaisdell2179 3 жыл бұрын

It's been years since I worked on a gas dryer. Thanks to your Video as a refresher I repaired 2 today.

@applianceassistant 11 жыл бұрын

That sounds about right... Drum temperature fluctuations depend on the moisture content of the clothing, burner size, and temperature settings. Thanks for the comment!

@JCPicache 5 жыл бұрын

This was fantastic. Thank you for putting this together, and I certainly appreciate the sentiment of helping others with our newfound knowledge.

@joannmartinez4098 3 жыл бұрын

Dryer keeps cutting off electrical outlet and won't turn back on.

@applianceassistant 12 жыл бұрын

That's awesome! Thanks for the comment!

@pierrechatelain3536 10 жыл бұрын

Excellent Video - I look through several videos and this one is complete, simple, and because of its content, I bought a 3.86 fuse and fixed my dryer. I had no hope and this is the first time I used a voltmeter and understood how it works.

@pdgearhead3504 6 жыл бұрын

Excellent video with great diagnostics. I replaced a blown thermal fuse and then determined the cause for the failure (obstructed and kinked vent hose). Thank you!

@vanessaweemsss5740 Жыл бұрын

Also wanted to tell you how wonderful it is to have someone who knows how to read the voltmeter to troubleshoot. This is a great learning video for those of us who don't know how to read the multi-tester or schematic drawings. My brother became an engineer in electronics, and when he was first studying, I never paid attention to everything he'd say he was learning, and I now wish I had.

@applianceassistant Жыл бұрын

I know the feeling! So many great concepts went in one ear and out the other. Once that chance passes,it seems like the only way I learn is through trial and error. Thanks for your comments!

@PatrioticGestalt 2 жыл бұрын

Hi, as a 9-to-5 paper-pusher, you and five other KZfaqrs have helped me fixed my Maytag Atlantis dryer. I wanted to thank you guys for your very informative video. So... thanks. LOL. I replaced the solenoids to fix the problem.

@psychofish1 11 жыл бұрын

Just a big Thank You. Mine was wire which came loose off the flame sensor and sat under the flower tube, so I couldn't see it. But as I tested the various components according to your instructions, I found one of the terminals to the flame sensor unconnector, and dug underneath a blind spot to find the matching wire. Thanks for the posting the video and providing all this feedback support to people asking questions. I will order any appliance parts I might need in the future from your company.

@alwayscan21 13 жыл бұрын

Unbelievable, great video. Great detail. I fixed my whirlpool dryer a couple of times in the past but this time it was firing on and the flame went out after 10 to 15 seconds. The comments and your very helpful replies to other gave me the answer. My vent was clogged from lint from a very fluffy blanket. Thank you

@applianceassistant 11 жыл бұрын

Thank you! I'm glad you liked it!

@applianceassistant 13 жыл бұрын

@bellcherian Thanks for the comment, Glad I could help!

@stevent1074 6 жыл бұрын

Excellent video. Even technicians experienced in other types of controls may not be familiar with the logic used on a gas dryer. Approaching the problem in a step by step manner most problems reveal themselves. Don’t get discouraged if your issue falls under the “advanced” category. It’s called that for a reason. Make a copy of the diagram you can write on to keep track of what’s happening in the circuit. Watch the video again. Ask-What points do I want to check next? If you stick with it you will figure out what’s wrong, you’ll fix it, and that’s something to be proud of.

@Ruffneckdman 12 жыл бұрын

Okay...so my dryer gave out after a couple of thousands of wash that had to be dried...I followed the prescribed troubleshooting on this video and "Voila!" my dryer is now back into action for a mere $25.00 in parts and delivery via ground Fedex...I'm so indebted to this instructional video and the author "applianceassistant"..thank you thank thank you!!!

@dungthai2193 8 жыл бұрын

I thank you for the Description on troubleshooting problems, my gas dryer has power, fire, but no fluent gas, I replaced a few components like: thermostats, flame igniter, and thermal fuse. But after seeing this, I realized the coil valve solenoids were the main problem, bought the part and install them. Works perfectly fine now. GREATLY APPRECIATED!!!!

@n7ypg 7 жыл бұрын

Issue was the fuse, and THANK YOU for walking through the wiring diagram and explaining the electrical circuit for the flame sensor, igniter, coils, etc. Cool stuff!

@markjennings4101 5 жыл бұрын

Thank You! With help of this video, I replaced my thermal fuse, and the dryer is working as it should again.

@lexconor8498 6 жыл бұрын

FANtastic video! I had a multimeter, no idea how to use it. But with your instruction I was able to establish that the fuse was bad (lucky me, first thing I checked!). Bypassed it just to double check. I cleaned the entire machine, including removing the lint catch tunnel thing. GOod thing! THe very bottom had thick, caked on lint that was severely narrowing the passage of air. Need a screw driver to chip it away! I think that's what caused the overheating that blew the thermal fuse. Got a new belt, and the rear seal was hurting so ordered new one of those. Not bad for a 20+ year old machine! The timer is limping along, but at $140 I'll cross that bridge later. They should have appliance salvage yards. THanks again!

@applianceassistant 12 жыл бұрын

@garciaJo65 Thanks for watching and commenting! I'm glad it helped!

@robwallingsford9274 4 жыл бұрын

Not only informative but well executed in practices, explanation and oratory(not monotone, clear & concise speech no echo, etc). Well done👏👏

@war3agl3 12 жыл бұрын

Awesome, watched your video, found my fuse was faulty and $19.06 later the dryer is working again. Fantastic!

@acfixerdude 11 жыл бұрын

Great vid, I'd like to add to the discussion for those watching. If your dryer's ignitor is lighting up but it fails to trigger the valve it the ignitor could be weak and need to be replaced. You should of course check the other possibilities mentioned in this video but keep the ignitor in mind. Cheers.

@applianceassistant 13 жыл бұрын

@alwayscan21 Thanks for the positive comments! It's always great to hear of a symptom, cause, and success!

@cjmerobot1204 2 жыл бұрын

Because of this video I found my flame switch was bad. 10 bucks on eBay and my dryer is working again. Thank you!!!

@applianceassistant 11 жыл бұрын

Thanks for backing me up Joey! I've barely been keeping up with the local service calls and have been slacking on the youtube comments a bit the last few days... Thanks again!

@LnStar492 2 жыл бұрын

That was the very best explanations of how a dryer works and how to efficiently trouble shoot the problem with a multimeter. Thanks for providing a schematic and showing the various paths. I feel I can take on any dryer problem now. :)

@andreube 10 жыл бұрын

Thank you very much for clear, intelligent and helpful advice. Helped me understand and isolate the issue quickly!

@kannantm2731 4 жыл бұрын

Thank you so much.Its a fantastic introduction for dryer repairs.

@robin0655 8 жыл бұрын

I have a Whirlpool gas dryer that no longer heats but still cycles. It's unusable without any heat. I've ck'd the outdoor vent and only looked at the back which is completely encased. I think gas dryers of the past had an accessible entry to relight pilot. I get that those times are past. The video is very informative and have given me a few other ck's before calling it quits. Thank you & well done!

@tyronnturner8622 3 жыл бұрын

I work for Samsung as a repair man,you just help me complete a stop.Thank you and god bless, Ps dont stop helping people

@erlindoramos7396 6 жыл бұрын

Thank you, with your video I was able to repair my dryer and find out what to replace, it was the igniter for a whirlpool .

@applianceassistant 11 жыл бұрын

I'm glad it helped! Thanks for the feed back!

@applianceassistant 12 жыл бұрын

That's true! In some states it's required the installer replace it... Replacing the plastic flexible duct is highly recommended! The stuff in the video isn't the best but it's generally okay, you just need to avoid dips and bends in the duct. Definitely much more prone to clogging than the rigid duct though. Thanks for the comment!

@gregmartin2788 10 жыл бұрын

Thank you for the video. (very nicely produced, btw) You just saved me a service call!

@applianceassistant 11 жыл бұрын

Thanks for posting! That is definitely true when it comes to range ignitors. However, I have never in 16 years seen a weak dryer ignitor that would not trigger the flame switch... I suppose it's possible but very rare. Thanks!

@charliecubero2260 3 жыл бұрын

I fixed my gas dryer with the help of this video. Thank you.

@applianceassistant 11 жыл бұрын

Sorry it took so long to get back with you! A dryer coil replacement is usually about 130-150! Kudos to you my friend!

@applianceassistant 11 жыл бұрын

Sorry for the delay... Congratulations! Thanks for the update!

@applianceassistant 10 жыл бұрын

Thanks! the timer connections change from model to model so I was a little vague when discussing the timer. Wire diagram is key on diagnosing timer problems. Generally there is the timer motor power connection, the dryer motor connection, and the heating circuit connection. However, wire colors and terminals are different from model to model. Thanks for the feed back!

@applianceassistant 13 жыл бұрын

@bandcministry That's what it's all about! Thanks for the comment!

@markkern3591 7 жыл бұрын

thank you so much! you have saved me time, and money buy posting this. it turned out to be the coils on the gas valve. YOU have warmed my heart, and my Dryer thank you!

@ArtisaneSC2 11 жыл бұрын

That was my assessment as well after doing further research. I'm ordering the parts today. Thanks so much for the advice. This video was a BIG help!

@TexasKid747 8 жыл бұрын

Thanks for this video. This made my gas dryer repair super easy. Coil replacement. BIG thumbs up! Interesting that Samsung doesn't offer the coils separately but everyone else does. My gas valve assembly said Maytag so I got Whirlpool coils. This is a Funny industry.

@eyeballcontact 13 жыл бұрын

Thanks...Was ready to go buy a new dryer. My issue was a 19.95 thermal fuse and a good cleaning. Makes me wonder how many dryers awaiting recycling roadside just need minor repairs. Maybe I'll shop those next time. Nice easy to follow video. Thanks again. Mike

@applianceassistant 11 жыл бұрын

Sorry it took so long to get back with you! I'm trying to get back up to date on my comments after a big side project. Thanks for the comment! I'm glad you liked it!

@JaronLindow Жыл бұрын

This video helped me find and fix the problem. And my failure to follow instructions helped me find a live 120v cuss inducer.

@antelthrope 2 жыл бұрын

Great Video! I couldn’t find another guide that discussed the flame switch, which ended up being our issue w a kenmore 600. Thank you so much for this detailed video!

@jonathanmccary967 2 жыл бұрын

This video helped me fix my first dryer issue. I replaced my valve solenoids thanks to this video's help. Awesome video!

@applianceassistant 12 жыл бұрын

@jake20214 My pleasure! Thanks for the comment!

@ggkohler 10 жыл бұрын

Outstanding video. I appreciate the clear and concise presentation. Many thanks!

@applianceassistant 13 жыл бұрын

@EVANHUNT Thanks for the comment! It's nice to hear what is helpful, so I can make improvements on future productions!

@carlpartycity 9 жыл бұрын

Thanks for the video, I replace the coil and it's back up and working.

@applianceassistant 11 жыл бұрын

Wow that's quite the complement... There is some amazing stuff out there! Thanks!

@vincezing4607 6 жыл бұрын

This is a great video. Was doing research on my Whirlpool G

@garrirt23 11 жыл бұрын

Great video... Wish I'd seen it BEFORE I replaced the igniter. Replacing the solenoid coils did the trick. Thank you. Saved a service call. Great Video!