This video is insanely helpful! Wow! Well done!

I have a gas dryer, that doesn't shut off. I bought a new timer, thinking that was the only possible cause, but I see here there are a number of possible causes. Good video. Thank you

Well, that was an amazing informative video. Very well produced and I was able to see exactly what I needed to do to fix my dryer. We have no Appliance repairman where I live, and it's 3 hours to the closest town. Very expensive to have someone come out. Thank you again, I am a subscriber.

How did so many people not like this video? Its the best ever.

The stance is top tier 👌🏾

Excellent, informative, and no nonsense. Very nice . Much appreciated .

Replaced start switch and now everything back to normal. Thanks!

I removed the sensor to find lots of lint behind it and lint in the hole where the sensor wires fed through. I vacuumed and thoroughly cleaned the sensor, vacuumed the entire dryer and it works normal now.

After watching this video I have now become a certified KZfaq dryer diagnostic technician.

Thanks! Wanted to caution folks that success of this method may vary. I tapped the relay a LOT would not work-could not unstick it by tapping. ordered a refurbished circuit board online for $100.00 (Samsung parts website no longer carried it). Swapping out the boards fixed the problem, but after 3 days the problem was back! however, with this new circuit board tapping the relay does seem to work so far. I wish when something like this happens where a product has a universal problem, even if out of warranty, the company would do something to make things right for customers.

What about the resistor at the start switch? it will keep the timer from shutting the machine off too

Excellent Video! Well Explained!

Great job Matt, excellent video

Great job for your information you have help me a lot ty

Worked for me. Thanks. Samsung Model DV40J300GW

I'm confused!! Could you maybe shed some light on my problem with my G.E. dryer. I vacuumed all the inside of the dryer thoroughly. And replaced the vent tube to the outside. This was done prior to the belt breaking. Just replaced the belt and the door switch to make the dryer work again. Now the dryer heats up but will not shut down. Is it possible a wire came off the timer or something else is wrong. I don't want to call a repairman as it will not be worth the money. Any information would be greatly appreciated!! Thank you David!!

Great! Thank you!

My dryer dries but when it gets to cool down mode it will set there for ever till you turn it off. Any suggestions on where to look for this problem?

I love this guy and I have no idea why lol. I think it's the stoner smile he has 😆

3way door switch, if I did not plug it together the right way will that cause it to keep running after shut down?

My timer isn't stopping when it gets to off. It just keeps spinning around and around like the Energizer Bunny. It just keeps going and going and going like the song that never ends......

Really good video thanks.

How much resistance should a dual element show? I have a couple of Samsung elements that read like: Blue and white--- 46.2 Blue and Red---- 12.5 White and Red---33.3 Blue is in the double if I am not mistaken. In my experience, I can see the 12.5, but the higher reading has me scratching my head. That being said, I think I saw a video where someone else showed high readings similar to these. I am not sure if they showed two high readings. The dryer I am stuck on only heats up to like 90 with all new thermal components.

The timer on my dryer would not stop at off after the 70 minute cycle. The timer continued from off to the air fluff cycle and then to the low dry cycle, however only the heating element turned on but not the blower and it did not tumble. I changed the timer as suggested but the new timer does the same as well. Does this mean I got a faulty new timer or something else is wrong?

Good job

I know this video is a bit old but I figure I would comment. I have a Roper dryer who’s thermal fuse I’ve replaced 4 times now. It won’t shut off whether on timed dry or auto dry. Any idea? I’ve tested the continuity to my timer and not sure if I’m reading it correctly

What is it when your electric dryer works as it should and shuts off at the end of the cycle, but the heat is staying on?

I put a load in my dryer last evening and I didn’t realize it but the dryer kept spinning all night. The clothes were plenty dry and only barely warm when I pulled them out. However, now that I have stopped the dryer from moving, it will not start again. Also, the timer mechanism never finished cycling with this last load. Please help!!!!

Bad element will only keep the timer from advancing in Auto Heat, right? Whether it gets to rated temp of the cycling stat or not had no effect in Timed cycle, right?

My Samsung dryer gets stuck at 1 minute on both manual and auto sensor cycles. The heating element was just replaced...any change the repair and the new problem could be related?

Super helpful. Thanks!

Hello I have a whirlpool dryer after for example I set it for 60 minutes ,when its done it wont turn off,but start buzzing till we turn it off ,what do you think? Please advise Thank you

Thanks for the information

What would cause my dryer timer not to advance while in the cool down cycle?

I replaced the timer not stop

Same fix for gas dryer??

Great job yoi help me

Samsung stacked on 1 min remaining any idea

GE dryer won’t start unless it’s banged and now won’t shut off even with power button turned off.

Why would a dryer timer not shut off in timed mode?

Dryer wont shutoff on certain cycles

So mine stays on all day and clothes are still not dry. Can feel no heat at all.

Timers are expensive. I fix them when I can

he's talking too fast