No video

Applying New Hull Liner on Speedboat

  Рет қаралды 9,278

Sailrite

Sailrite

Күн бұрын

In this short video tutorial, you’ll learn how to apply new hull liner fabric to a speedboat. This is a no-sew project that anyone can tackle with just a handful of materials and supplies. This video is part of our Speedboat Makeover Series. We’re redoing an entire speedboat - upholstery, flooring, side panels and more - using Sailrite tools and supplies. At the end of our how-to series, this speedboat will look brand-new. Join us for this exciting DIY series.
Watch the Speedboat Makeover Series: • Speedboat Makeover Series
Intro - 0:00
Removing Old Hull Carpeting for Patterning - 0:46
Applying Spray Glue - 2:44
Installing Boat Blanket - 4:09
Patterning for Shapes & Curves - 7:02
Materials & Tools List - 13:02
Materials List:
Boat Blanket Black 72" Fabric - SKU: 100113 www.sailrite.c...
Headliner Adhesive 13 oz. - SKU: 123288 or 3M™ General Trim Spray Adhesive - SKU: 73211 www.sailrite.c...
3M™ Specialty Adhesive Remover 32 oz. (Quart) - SKU: 108984 www.sailrite.c...
Tools List:
Chalk Pen White - SKU: 123131 www.sailrite.c...
Clear Acrylic Ruler 6" x 24" - SKU: 102400 www.sailrite.c...
Gingher® Scissors Right Hand Lightweight 8" - SKU: 101017 www.sailrite.c...
Rags, Box Cutter

Пікірлер: 6
@Jim-fe2xz
@Jim-fe2xz Жыл бұрын
Nice project! I've found that where you can if you use a roller to apply extra pressure over the surface the bond is even stronger.
@SailriteDIY
@SailriteDIY Жыл бұрын
That's a great idea!
@davestewart9146
@davestewart9146 Жыл бұрын
Nice 👍😁
@SailriteDIY
@SailriteDIY Жыл бұрын
Thank you! Cheers!
@bobcfi1306
@bobcfi1306 Жыл бұрын
I liked the boar blanket material. I have a 1979 hunter sailboat with nasty carpet on the interior vertical surfaces. When I remove the carpet there is some residue glue on the fiberglass surface. Is it ok to just install the boat blanket directly over that surface? Thanks Bob
@SailriteDIY
@SailriteDIY Жыл бұрын
Yes, you can apply the new boat blanket over an surface that still has old glue residue on it. As long as it is flat with no chunks of old carpet stuck on the surface. You must remove the old nasty carpet, but not the old glue residue.
How to Upholster an Engine Cover for a Speedboat
1:14:17
Sailrite
Рет қаралды 12 М.
How to Install Woven Vinyl Flooring on a Speedboat
26:18
Sailrite
Рет қаралды 10 М.
لااا! هذه البرتقالة مزعجة جدًا #قصير
00:15
One More Arabic
Рет қаралды 50 МЛН
No empty
00:35
Mamasoboliha
Рет қаралды 12 МЛН
小蚂蚁被感动了!火影忍者 #佐助 #家庭
00:54
火影忍者一家
Рет қаралды 52 МЛН
IQ Level: 10000
00:10
Younes Zarou
Рет қаралды 13 МЛН
How to make a fiberglass boat Dodger
18:36
Sailing Rebel Star
Рет қаралды 15 М.
How to Upholster Side Panels on a Speedboat
48:22
Sailrite
Рет қаралды 14 М.
#8 FIRST TIME Upholstery Challenge!! Boat Seats
22:14
Kentucky Yankee
Рет қаралды 3,9 М.
How to DIY off-brand "SeaDek" from Amazon (SAVED OVER $2000!!!)
12:30
Waterman’s Way
Рет қаралды 216 М.
Fiberglass Gelcoat Repair (So you hit something with your boat)
15:24
The After Work Garage
Рет қаралды 479 М.
Man Turns Ruined Garage into Amazing Workshop | Start to Finish by @tyap-lyap
30:12
How to Upholster a Speedboat Bench Seat Backrest
48:41
Sailrite
Рет қаралды 38 М.
لااا! هذه البرتقالة مزعجة جدًا #قصير
00:15
One More Arabic
Рет қаралды 50 МЛН