Excellent job providing assembly videos on your products. Also you are still as far as I know the only company sharing crashtest videos online. Very nice work.
@Outbackmotortek3 ай бұрын
Thanks. Yes, we are the only company doing crash bars drop tests. Perhaps more companies will join later on
@yellowvstrom Жыл бұрын
Lo he montado en una Aprilia Tuareg y se ve muy sólido, me envanta. Lo único que no me gusta es la resonancia que se crea con la vibración, es algo molesto el ruido. Tal vez se podrian poner unos silentblocks para absorber las vibraciones y reducir el ruido que generan.
@AdvBrewery11 ай бұрын
Just bought the skid plate crash bar combo using west usa site. Ships from my home state! Great video and instructions. Does this skid plate work with HP7 dominator exhaust?
@DadCanFixAnything Жыл бұрын
This skid plate looks great and seems like it will protect the lower vitals very well. I was ready to buy unti I saw the installation. Now Im not so sure if I want to deal with that every oil change.
@Outbackmotortek Жыл бұрын
It takes 3-5 minutes to uninstall the skid plate. The brackets can stay in place
@DadCanFixAnything Жыл бұрын
@@Outbackmotortek Thank you for the response. I'm still a bit hesitant on the skid plate for the moment as am not sure I want to add any additional time/complication to the oil change process, as there may be times that this is performed roadside somewhere. I really like the idea behind the T-Rex Racing skid plate with the ability to leave the plate on for oil changes. However, their skid plate is otherwise inferior and not as protective as yours (unless adding the significantly additional complication, bulk and weight of their lower crash bars. No thanks.). I will decide on the skid plate later, but I did already order two sets of your crash bars. Thank you for providing products that are not overly complicated, designed to be used, and not just for looks, and thank you for actually testing them before I do!
@AndrewWilmotAu5 ай бұрын
I just fitted your skid plate with swmotech crash bars, but the strap that goes over the water pump wouldn't clear when used with the 15mm spacer provided by SW Motech, and there wasn't any spacer provided with the skid plate from you. Is there supposed to be? One is needed if you were just going to fit your skid plate by itself. I ended up making two 25mm spacers and putting the strap between them (the two spacers provided by SW Motech were 15mm and 36mm). It worked out fine in the end, but you need to address this in your instructions and provide the required spacers at the very least for customers that just want to use the skid plate by itself. You would also need to provide longer bolts with the skid plate as well, as my kit didn't come with the longer bolts either. Luckily SW Motech provided these with the crash bars.
@makoia5532 Жыл бұрын
Hello, why you not use the connection from the exhaust bracket?
@ernest3074 Жыл бұрын
At 3:17 you do not put blue Loctite on the bolt (bracket to integrate the front left crash bar), nor at 3:55 for the right hand bolt. The only time I see you apply Loctite is at the back brackets (5:50). While you stress the bracket has to be loose so you can integrate everything, you do not appear to revisit them later at the torquing part - to apply Loctite. Any reason why not?
@Outbackmotortek Жыл бұрын
We don’t put Loctite on bolts, which thread in the engine block.
@ernest3074 Жыл бұрын
@@Outbackmotortek Would you not even use grease for bolts in the engine box?
@igordutch2808 Жыл бұрын
Great product! Is it possible to use together with OEM center stand?
@Outbackmotortek Жыл бұрын
Yes, it’s compatible
@DadCanFixAnything Жыл бұрын
From my experience, center stands are great, unless you do much serious off-roading and then they are just a nuisance. That is not just due to the extra weight, but if riding more aggressively, they also get in the way a lot and will drop down on any hard hits/landings creating a nuisance at best and possibly a serious risk if it gets caught up at speed. Happy riding!
@beags1979 Жыл бұрын
Will this work with the oem center stand without any modifications to the skid plate?
@Outbackmotortek Жыл бұрын
Yes
@FulTrotl Жыл бұрын
What is the weight of this skidplate?
@Outbackmotortek Жыл бұрын
4kg/9lbs including all the brackets and hardware
@gmarcos95 Жыл бұрын
Is this compatible with the OEM crash bars?
@DadCanFixAnything Жыл бұрын
I think it is.
@marcospeguero53548 ай бұрын
weight??
@Outbackmotortek8 ай бұрын
4kg including four steel brackets and hardware
@2482jamie Жыл бұрын
can i jack the bike up on its skid plate with this ?
@Outbackmotortek Жыл бұрын
Yes, it’s doable
@erkful9 ай бұрын
Why not have captured nuts on the brackets instead of messing around with nylocs?
@Outbackmotortek9 ай бұрын
It makes the overall experience of installing the skid plate easier. Captured nuts can be cross threaded easier if there’s tension on any of the skid plate brackets
@erkful9 ай бұрын
@@Outbackmotortek it’s a lot of unnecessary messing about every oil change. Hunting about every time I drop a nyloc. I have big hands and little patience.
@inmotoverso Жыл бұрын
is only white?
@Outbackmotortek Жыл бұрын
We offer matte black powder coat option as well
@podunkman27094 ай бұрын
Looks ugly. Like home made
@Outbackmotortek4 ай бұрын
Yet we can’t keep up with the demand. However, you’re free to express your opinion.