The zip tie fix to stabilize the axle design flaw is genius! Works like a charm now! Thank you!!

Been having problems for quite a while but couldn't figure it out. Your zip tie fix is genius and fixed the problem perfectly. I'm in awe you could isolate the issue to those parts and come up with such an easy solution. Way to go!

I went ahead and bought the new gear socket for $14...worked like a charm...you nailed it!!

Great fix! My pool cleaner froze up out of the blue. Thought something was jammed in the cleaner (one time it sucked up a gopher that fell in pool). It turned out to be those wobbly gears. Your zip ties worked great. Pool cleaner is busy again. Thanks so much!!

“Planned Obsolescence!” Amen brother. This fix worked for me and probably saved a few hundred $$.

Yuuuuuuuuup!....freaking GENIUS!... already bought one of those long spine shafts thinking that was the problem... and it was a problem because it was worn out ...but not the real reason why my pool vergnugen was not working... this fix took only about 5 minutes and two zip ties and it works!... geez save me a lot of time and effort and hassle I was just about to go buy all the guts for this thing...saved me $$$🤑🤑🤑 Thanks for posting this video You're the best!

Your video is amazing! I was getting so frustrated with our 8 month old vacuum because it kept going into the same corner and not moving. Our pool has been a disaster because of landscape construction, and today it finally looks so much better (even with the wind and construction). Thank you so much for this trick!

Man i thought I was crazy for sec. Identified the problem ur solution worked great . New part and all. You still have to do this

5:32 Had the same issue, followed your directions and it worked perfectly!! That was genius! Thank you!!

Thank you for the info! I’ve purchased 2 of these and thought they should last longer. Now I can fix both of them!

Worked like a charm 🎉 Great video. Not just because it fixed my Hayward aquanaut but because steps well documented.

@GarageBattle Mate, you're a legend, thanks for taking the time to make the video.

My Hayward Azua 200 was having issues - would only spin in circles periodically. I tried bumping up the Pump pressure, making sure all collection sources were cleaned out of leaves, palm tree seeds, and finer items. I also cleaned out the wheel grooves, but nothing worked. I was thinking of buying new parts but then found this video which changed everything for me. After making these changes the cleaner now runs all around the pool while on and I am very happy! Problems with cleaning the pool are solved!

GarageBattle - Excellent video!!! Good video angles (even with camera in one hand), good instruction, to the point, and done! Enough reasons why and how. Well delivered. It took me longer to gather zip ties, and tools than it took to fix it.

@garagebattle....thank you so much! My pool cleaner worked in reverse but stopped moving forward and your fix was exactly what it needed to perform properly. Very much appreciated!

Dude thank you! I've only had mine like a year and already giving me problems. Thank you man

Thank you so much for posting this video. The fix works great, so far!.

Thank you for terrific advice. So easy to understand, even an old lady like me can do it.

Worked like a charm. Tysm.

I used this fix. Works perfectly. Thanks for saving me $$$.

Great video. Fixed mine for now.

I wish I saw your video earlier, and I just bought a new one. I will try to see if i could fix the old one. My old one would stop moving periodically.

Dude nice find! Thank you for the video…it worked!

My aquanaut includes a stabilizer piece. It's part of the grey housing. So shaft wobble only happens when you disassemble. My aquanaut is about 3 years old. You can see the tab doing its job without taking the unit apart - just look closely through the black grate at the gear in question - you'll see it.

Fantastic! I love these genius repair hacks! Well done!

Had this exact problem. Do you mind sharing what that gear part is called? I’d like to change it just for maintenance too and then install it with your zip tie method!

GENIUS!

I'm not saying it's not designed to fail. But I think you are misunderstanding the mechanism, that drive shaft is loosey goosey because it moves in and out to trigger the thing to turn around.

Poolvergnuegens we’re good and long lasting before they were owned by hayward. I believe hayward makes them in China now.

N I C E

Why do you have scotty as your thumb nail?

Just expoxy a support that should be there with epoxy putty.