How To Completely Remove The Samsung Monitor Mount or Stand Hinge

Рет қаралды 706,033

4 жыл бұрын

IF THIS VIDEO HELPED YOU - PLEASE SUBSCRIBE- HELP ME GET TO 100k SUBS PLEASE!
Buy this cheap spreader kit if you don't want to mar the plastic: amzn.to/3l190D4
Consider these monitors as a better choice: amzn.to/36xMTAf
Only attempt this if you are comfortable taking monitors apart. You do run the risk of damaging the screen if you are not perfectly careful. This video shows how to completely remove Samsung’s pesky mounting stand and hinge so you can hang your monitor on the wall or use it with a monitor arm. This video shows hot to remove the arm, pedestal AND the rotation hinge that is mounted to the panel from the inside with screws. This removal and assembly can all be done using a flathead screwdriver and a Philips head screwdriver.

Пікірлер: 864

@kooltob 4 жыл бұрын

The award to the stupidest design goes to Samsung! Thanks dude, you saved me, was going nuts.

@jaboijill3787 3 жыл бұрын

Dude you can fucking say that again

@jbdsatvv 2 жыл бұрын

almost destroyed the desktop.. Never Samsung again! Stupid design

@bekacynthia 2 жыл бұрын

Hahaha, me too! Finally got it off

@ErikHinrichsen Жыл бұрын

God damn, no wonder this monitor was so inexpensive.

@Sip-that-Soju 4 ай бұрын

Just destroyed mine I was gonna get a new one anyway but still mad af am korean but this model of monitor @@jbdsatvv

@nigelhutchinson5332 3 жыл бұрын

Man, this was really perplexing me, I was like "there's no way you have to separate the panels". Thanks for the video. Brutal design.

@merfibeemused 3 жыл бұрын

Absolutely true and what makes it worse is that Samsung send instructions how to remove it which directs you to swivel the stand arm up and then basically batter the mechanism with your hand and simultaneously pull it down until it comes off....yeah good luck with that one. I bet even the people packaging these in the factory tell anyone they know who's thinking of buying one to steer well clear. RUBBISH DESIGN!

@Azeerpro 6 ай бұрын

Same

@yapolloable 3 жыл бұрын

Without this video, I'd never ever thought of disassembling the monitor just to remove the stand. Shame on you Samsung.

@ice69191 9 ай бұрын

100%

@shineman963 4 жыл бұрын

I’m glad I’m not the only one that searched this up

@irishish12 3 жыл бұрын

I've never been so relieved to find EXACTLY what I was looking for on the first try. Thank you for your time and effort! Made my night less stressful.

@ryanmccleave3562 3 жыл бұрын

I can’t begin to describe what curse words I used toward Samsung when I tried to mount this. Thank you so much for the tutorial. Whoever designed this, needs to go back to school. Amateur hour. Thanks again

@micahbell8533 3 жыл бұрын

I can't even fathom what they were thinking when they made this abysmal design and then tacked a Vesa mount on as well. You were a huge help!

@Connor-wj9op 4 жыл бұрын

Was looking for a solid straight to the point tutorial and this worked great. Thank you!

@Archifx 4 жыл бұрын

Glad it could help!

@atique2545 2 жыл бұрын

Warning! So many people actually got help from this nicely demonstrated video but many ended up damaging their monitors including me. I used my Samsung monitor for 5 and a half years and never had I ever faced a single problem.Then I tried to do this carefully but when I removed the hinge, a vertical black line of approx .5 mm appeared in the middle of the screen. It has ruined my beautiful monitor. Those of you who will try this process, kindly keep this in mind.

@ramirodecono3647 Жыл бұрын

Hey man, same shit happened to me. This is samsung's fault 100% though, why the fuck would they make that design...

@murphybrown32216 Жыл бұрын

I have a vertical line on the left side, anyone have a fix?

@Jax_Augustin Жыл бұрын

@@murphybrown32216 same here, please if anyone knows how to fix it

@murphybrown32216 Жыл бұрын

My plan at this point is to heat up and resolder all the solder joints on the power supply board. I have a microscope for working on small stuff and looking at the board, every solder joint on the board is a cold joint and not making good contact. I called Samsung and the secondary number and was told to call the parts number and I would need a new screen. I emailed the parts people who said I needed to call the tech number to find the problem first, they were only parts people.

@shoto2883 Жыл бұрын

same happened to me today

@Scyblee 3 жыл бұрын

Thank you so much. Clear concise and so easy to follow. I had it finished in the same time you explained it. Nice work.

@OriginalYank 3 жыл бұрын

I was *this* close to pulling out the hack saw. Subbed to a new cool dude in stead. A win for all involved, especially the monitor!

@ryle1683 3 жыл бұрын

whoever design the stand deserves a pro... TO BE FIRED!

@lyn3667 3 жыл бұрын

I appreciate the assist. I have two monitors with this kind of backing and finally decided to make the change to a mounted setup. :)

@MSloc314 3 жыл бұрын

BRO, PERFECT. Straight to the POINT. Thank you x’s infinity

@DesmondNgBC 4 жыл бұрын

Thanks for this, totally agree with you on design. Wouldn't have opened my panel if not for your video.

@stevenwarrington5189 2 жыл бұрын

Literally saved me! I was going to the store to buy a custom stand, then I saw this! Literally saved me the time and money!! Thank you good sir!! 🙌

@Caeleinn 3 жыл бұрын

THANK YOU! I recently splurged on a Samsung curved monitor and decided to put it on a wall mount. I finally managed to get the stand off but that large bump is preventing me from pushing the monitor as far back as I'd like. I feel confident enough now to remove that bump and finally have my monitor as flush as possible to the wall.

@matthenderson4019 9 ай бұрын

People like you and videos like yours are the redemption of KZfaq and the internet in general. You're awesome! Thanks!

@sebastianroa3918 3 жыл бұрын

Thank you so much for this. I've got a Samsung C27F390FHU monitor, and I wasn't able to remove its stand. Now the job is done. Greetings from Spain.

@damiangray5641 4 жыл бұрын

Thank you, i would never have been able to do that without this video !!!!

@jaimered 3 жыл бұрын

This was really helpful - thanks for posting

@arlenerandolph5379 3 жыл бұрын

Hubby agrees w/ u 100%. Lol, he was fussing about why Samsung did this when they know u wanna mount ur monitor. Thanx so much 4 making this video!!

@LeviLife 3 жыл бұрын

Bro This video saved me at least 3 days, 10 headaches and actually the monitor itself because I would have been breaking it up to pieces from anger and frustration 😍

@Awesomebird27 3 жыл бұрын

Thank you so much for this, I've had this monitor arm mounted for so long and every time I'd bump my desk that stupid bit would smack against my wall. I was actually so close to just taking a damn buzzsaw to it, but now I thankfully don't have to. Good tutorial worked out great

@Replicant9900 3 жыл бұрын

Two words, Sawzall :)

@wkdlillaw 2 жыл бұрын

Thank you so much! Can't believe this was the only way to remove the stand! I somehow managed to do it with little damage from the screw driver. Thank you for making me laugh at the end, I've been swearing and shouting for the past 15 mins 😂

@DanishSyakir_ 2 жыл бұрын

This tutorial literally saved my life. Thanks man

@phoenixfire9313 4 жыл бұрын

Excellent and informative tutorial. Thumbs up!

@markhoneyslug 2 жыл бұрын

Thank you for posting this, I was about to give up on this for the second time and resign myself to the stand getting in the way of my being able to angle it down on a new two screen monitor stand. Now I don't have to! Thank you!

@RosiePosiePony 2 жыл бұрын

Even 2 years later this video helped my husband and I out! Thank you! 😁👌💖

@phenilalanina 6 ай бұрын

Three years later, you're still helping people with this. I'm moving out and couldn't pack it correctly with that stupid base attached to it. Life saver! Kudos to you, my dear sir.

@jonathanparle8429 2 ай бұрын

I just bought a brand new one today and in frustration I was about to use brute force to remove it. Glad I did not. And after reading all the comments I am not going to risk it - I think I can still vesa mount it even with the attachment still stuck to it. Luckily I am not wall mounting but arm mounting so there won't be anything getting in the way. I had only wanted to remove it for aesthetic purposes. Mine is the 27 inch curved model.

@TheSeaton22 3 жыл бұрын

Thanks so much for this video. Very informative and entertaining. I like what you said about throwing the stand as far away as you can. LOL

@brianjohnsted Жыл бұрын

Omg...thank, thank you, Did I forget to say THANK YOu! So many videos on removing tje stand? Only yours really focuses on actually removing the stupid bracket. THANKS AGAIN.

@MarX485 3 ай бұрын

Just found this one and used it for both of my 24” Samsung screens. Worked like a charm. Reading through people’s comments on damaging their screens, a tip: no need to remove the backplate completely, just undo it enough to lift it up a little bit and slide in a screwdriver underneath to undo the two bolts.

@knittingpixie7471 10 ай бұрын

What a life saver! 👍I spent ages trying to figure it out. Thank you

@Jasmine-pz4hu 3 жыл бұрын

Thank you! Made it very easy! And I really appreciate you getting straight to the point. I did not have to wait 7 minutes before getting to the information that I needed. :)

@Fjjsu 3 жыл бұрын

Lo subis en 2020 papá, 3 años estuve con ese pie del monitor colgado en un soporte hasta que ahora veo tu video. Sos groso, idolo, crack, titan de titanes.

@bruninhamrso 3 жыл бұрын

The amount of work, damn. Thank you so much for your help my dear stranger

@Replicant9900 3 жыл бұрын

I'll be helping my dad with this problem, so thanks! Glad I bought HP and Acer monitors, very easy to remove the stands from them.

@Kolbask Жыл бұрын

Kudos to you, man, for making this video, you have just saved my day! Or rather night. Thanks heaps!

@13aaryan 3 жыл бұрын

Good video, for anyone else doing this just use a plastic prying tool or guitar pick. It won't damage the plastic and will keep the resale value of the monitor a tad bit up.

@ankurbhattacharya466 3 жыл бұрын

Thanks a ton for this video. Really saved the monitor from getting damaged by the excessive force that I was about to use. Must be the mind of a genius behind its design.

@Glenport 4 жыл бұрын

Thank you. This saved me a huge amount of time and stress.

@moritzbiendara6130 2 жыл бұрын

Thanks for solving that riddle for me! I was really stuck because nobody ever could intend you to open that back just to remove the stand, or could they? Now I can proceed :-)

@justinkovar3922 8 ай бұрын

Thanks so much for making this. What specialized tools would you recommend for taking this apart with less chance of damage?

@Fety0072 Жыл бұрын

Great work - method worked perfect even though no flat holes to prise at the bottom - thanks heaps and I agree, not a very well thought about setup! Cheers.

@petrissebriel4713 Жыл бұрын

Thank you for the great Demo. Kinda makes you wonder about Samsung tech altogether, for all the hype.

@tryfree1 21 сағат бұрын

I was about to get the grinder out to cut of. Saved me as I didn't want to disassemble. I have removed it following step by step. Thanks a million. We'll explained. Fingers crossed there are no lines on the screen. Thanks again...

@USMCSANGER 2 жыл бұрын

I was going nuts, I knew I wasn't the only person dealing with this issue. Thank you for this

@superflykitty 2 жыл бұрын

Super-duper helpful!!! Thank you.

@melaniem9578 5 ай бұрын

This is the tutorial I’ve been looking for. Thanks so much for taking the time to show us how to get this done!

@yuli4077 Жыл бұрын

First time I've ever added a comment to any youtube video but you deserve it!! Great video and saved me alot of work. Thanks!!

@julia50314 3 жыл бұрын

Thank you! Would’ve never figured it out without your video

@NEVERKNOWSBE5T 3 жыл бұрын

Thank you so much for this exactly what I needed

@Curiously8 3 жыл бұрын

Your vid definitely helped this gal out, thanks! Was pissed when I saw this design after buying it...BIG FAIL FOR SAMSUNG...but it led me to this search and your vid :) Cheers

@stiphy 9 ай бұрын

Thanks this was exactly what we needed to get this thing on a wall mount. It wasnt bad but only because you showed is exactly what to do!

@JustPraiseHim 3 жыл бұрын

THANK YOU - I have been fighting this for days!!

@TheTwinsanddogs 3 жыл бұрын

Very helpful. Thank you!

@JoeDiLillo 3 жыл бұрын

Amazing! And thank you! You saved me lots of headaches!

@RVZNKaraoke 3 ай бұрын

Thank you. I thought that was too complicated to be true...but I also have the version without the VESA holes, so I had to get a universal claw adaptor. I wonder when I open this up if it will still have the metal, just not the holes. It's been a few years, but it might have been a display model at Costco. I doubt they would've made that one different....right? But I read of another person getting theirs from Costco without the holes.

@echopheonix 3 жыл бұрын

I just bought a pair of these to mount on arms, and I was furious by this terrible design choice. Thank you so much for the assist!

@cu8350 Жыл бұрын

Thanks for doing this! Silly design, but your video really helped me!! Thanks again!

@brodes4651 4 жыл бұрын

I think you dropped this 👑

@senseidiabloaldirecto8773 3 жыл бұрын

I have a Samsumg Monitor Curve, Do I have to follow the same steps as in the video? Thanks

@lauvillacampa9834 7 ай бұрын

This is insane!! What were they thinking? Thanks for the video!

@bobjones6602 3 жыл бұрын

Your the best, thanks. Turned out great once I got the old stand off!

@marciabraham 2 жыл бұрын

Thank you. I actually tried to return this monitor just days after buying (I couldn't get a good crisp image when paired with my mac) and I couldn't find a way to ship it back because of the damn arm. The amazon seller said "just pull it out" -- and of course they would not take responsibility for the damages if it broke, which clearly it would have.They would not help me return it nor would they refund my money, so I've been stuck with this stupid thing for a year. Finally decided to go ahead and use it with a new setup I have and it's working nicely, but I really want to get rid of the arm. I should have checked YT when I wanted to return it!! Thank you for this :)

@PremOneEarthOneFamily 5 ай бұрын

I dont usually comment on youtube videos. But your solution made me stress free.. I am going to return this monitor bought from Costco ..and i had to remove base. Very bad base stand design !

@edenrosederonsard 2 жыл бұрын

Thank you; very helpful!

@calvinng6326 Жыл бұрын

Thanks for the tutorial! Really needed this

@bekacynthia 2 жыл бұрын

I learned through another video but your explanation was top notch!

@L3X369 3 жыл бұрын

I found out that I can move the monitor up and down a bit during the time I disassembled this. Than you for posting this video!

@piotrzieba8720 4 жыл бұрын

Dude you saved my life! Thank you

@shayan8270 3 жыл бұрын

Man it's the worse when someone puts a gun to your head and tells you to remove their samsung monitor's stand. I feel you bro.

@piotrzieba8720 3 жыл бұрын

@@shayan8270 Haha this made me laugh thanks for the input

@dgp_hannes9451 3 жыл бұрын

Oh yes

@willporter2488 3 ай бұрын

Super helpful. Thank you.

@JethreL8710 Жыл бұрын

Thanks man! You’re a life saver….and yes - totally agree what a silly design jn order to remove the stand, ya gotta open up the monitor 🤦🏽‍♂️ Thanks again !

@LinusWestphal Жыл бұрын

Very helpful thanks!

@c.w.a.i.n. 3 жыл бұрын

Great video, saw what was involved and said screw it, then noticed that the base can wiggle off the arm, at least on my model. There's a seam that can be pried open and then all you are left with is the hinge part sticking out the back. In my case it's going on a monitor arm, so the little bit sticking out isn't an issue.

@Archifx 3 жыл бұрын

Yeah. You got lucky. Some monitor mounts get in the way of that stupid hinge.

@dougmasters4466 Жыл бұрын

Used this video a Second Time! Works like a charm! Thanks

@foxyfrantic7964 2 жыл бұрын

Just bought a new monitor for my PC intending to mount it & this saved me so much headache! Thank you!

@aquinomarcoalessandros.7-g36 4 жыл бұрын

Can't help but laugh every time you point out how stupid this design is. Thank you so much for the tutorial!

@josephbicknell6522 19 күн бұрын

You’re so helpful. Thank you.

@timhayes45 Жыл бұрын

What a cluster, thanks for sharing.

@Jacob_AL_Moore 2 жыл бұрын

Thank you! This was super helpful.

@FTWSplash 3 жыл бұрын

very helpful, thank you so much man

@therealmydoghasnonose 2 жыл бұрын

Lifesaver! I was close to breaking it ☺️Thank you.

@PieceChestnut 3 жыл бұрын

Awesome video. I was about to return my wall stand or light Samsung's support or fire

@khrisgaines7760 4 жыл бұрын

Thank you for your help.

@AldMD-cm2mz 2 жыл бұрын

Dude thanks! This is exactly what i was looking for

@bobus889 2 жыл бұрын

Thank you! Very helpful video :)

@Nitrolego 2 жыл бұрын

thank you for this video it has helped me install my monitor arms

@LatinoGamer96 2 жыл бұрын

You’re a freaking life saver, thank you !!

@vincentengberg3227 Жыл бұрын

Tyyy so much for the help. i recently gonna get a new moniter and i want my samsung (current one im using) to be on the side so thanks. bless you

@exequielborghi 2 жыл бұрын

Thanks. I can believe that someone did a tutorial of this. I bought an arm and couldn't figure out how to get rid of the base. Love you, ma´m.

@JacquesPotter 3 жыл бұрын

You are my hero for the day! Thank you!!

@Altareiss 3 жыл бұрын

HI, There is no screw on the SF350 model, 22". Any advice?

@andylowe364 3 жыл бұрын

Thank you for this!

@fbonacic 3 жыл бұрын

Absolutely agree with you man!

@DaveMcEvoyMusic 3 жыл бұрын

Thank you for this video 👍

@xryosukex3324 3 жыл бұрын

Thank you my friend 🙏🏾

@ZepyhrVentus 13 күн бұрын

extremely helpful video.. thanks mate

@iuvavum 3 жыл бұрын

You safed my day dude! Thanks a lot!