Arduino Bluetooth AT commands HC 05 HC 06

No video

Arduino Bluetooth AT commands HC 05 HC 06

Рет қаралды 61,215

DIY GUY Chris

Күн бұрын

Пікірлер: 105

@DIYGUYChris 4 жыл бұрын

★☆★ WRITE A COMMENT BELOW TO BE THE WINNER OF THIS MONTH 🏅🤖 ★☆★ 🏆HERE IS THE DISCOUNT CODE THAT YOU CAN USE IN JLCPCB : JLChris 🏆 MANY OTHER GIFTS TO WIN 🏆

@xpymka9832 Жыл бұрын

THANK YOU, BRO! My stupid teacher gave me a code that didn't work with this module and insisted that everything was correct, and it turns out it was me being foolish. I searched the entire internet because of him to find out how to connect it properly and make it work, and then I accidentally stumbled upon this video. I tried doing everything as you showed, AND IT WORKED! Thank you so much for the video XD.

@DIYGUYChris Жыл бұрын

Keep up the good work 😉

@MynameisBarry 2 жыл бұрын

I've tried many tutorials, every try wasn't success until i watch yours ! Thank you !

@DIYGUYChris 2 жыл бұрын

Keep on going forward 🤟

@lenoxlewis611 3 жыл бұрын

I have HC05 and I tried almost everything but I see serial monitor shows "ready" but entering AT does not return anything. Please help!!

@prestononuselogu9973 2 ай бұрын

I have the same issue

@karanbhardwaj3599 4 жыл бұрын

Thank you so much for this video. I am new in IOT and I just started making things. I made serial communication between laptop arduino over bluetooth and I will work on NodeMCU. This is most interesting thing and I believe software , hardware and your creativity can make world changing technology .

@DIYGUYChris 4 жыл бұрын

Thanks for your comment I hope you will be the 1ST prize winner 🏆 Let us know if we can further assist you

@shikhadeepankar 4 жыл бұрын

I just found out about your channel and I subscribers immediately because almost every question I had got solved thankyou

@sarette509 4 жыл бұрын

Thank you so much MEGA DAS u were of great help with my electronics engineering final year project😊😊😊

@arletpaz8010 3 жыл бұрын

i tried this on a nano and a uno and nothing.........this dont work at all!

@HarryColvin-o3t 22 күн бұрын

Just a quick question. Are all kcx bt emitters the same as far as AT commands?

@kobitadurgesh6123 3 жыл бұрын

This very useful video elctronic lovers and i also love this video

@emylia7496 4 жыл бұрын

Great tutorial, many useful info I learned many things from you #MEGADAS keep going #bestChannel

@DIYGUYChris 4 жыл бұрын

Thanks for your comment I hope you will be the 1ST prize winner 🏆 Let us know if we can further assist you

@Mahiya_Steam 2 жыл бұрын

THANK YOU VERY MUCH

@muhammedimdaad 3 жыл бұрын

why did u assign 38400 at the beginning and then changed it to 9600???

@DIYGUYChris 3 жыл бұрын

That's the default baudrate and it could be set as whatever BPS you need

@miaharley8051 4 жыл бұрын

Awesome Keep going I suggest to make videos about some sensors the way you did with the motors, that was useful

@DIYGUYChris 4 жыл бұрын

Thanks for your comment I hope you will be the 1ST prize winner 🏆 Let us know if we can further assist you

@shubhammarathe534 3 жыл бұрын

Hey. I want to use arduino uno, mpu6050 and hc 95 Bluetooth module. The problem is about power supply. Can i power hc 05 bt module or mpu6050 with external battery? If yes then please tell how

@DIYGUYChris 3 жыл бұрын

Hello yes you can use external power supply, just use an external 5V DC power adaptor and connect its (+) wire to Bluetooth VCC and (-) wire to both Bluetooth and Arduino GND then from Bluetooth to Arduino just Tx to Rx and Rx to Tx Same for any other device

@shubhammarathe534 3 жыл бұрын

@@DIYGUYChris Thanks buddy. Can i share my fritezing digram for my project with you? To clear doubts about it. Actually i am doing Arduino project first time so for doubts can i?

@JohnBacas 4 жыл бұрын

Nice video..!! Keep up the good work. I would expect a little more explanation about the AT commands, not just "read the link in the description"...

@user-jl1qb6qg4t 7 ай бұрын

Why does my bluetooth HC-05 have a blue LED blinking

@pepopepez105 2 жыл бұрын

not response AT ¿?

@xeither289 2 жыл бұрын

LOVE GOF AND EVERYONE!!!

@davechapman5572 3 жыл бұрын

Thank you for the video. It worked fine the first time I tried this, but the second time with the same HC-05 it doesn't work. It won't send back anything after sending "AT". What did I do?

@livinginOrwells1984 Жыл бұрын

Same here, except doesn't recognize but shows some gibberish in serial monitor and won't show up in scan on bt terminal app

@shahnewajbd4623 6 ай бұрын

After that how can i communicate with mobile phone Bluetooth,, please help me

@shalanfm 7 ай бұрын

Thank you

@DIYGUYChris 7 ай бұрын

welcome

@chrisking3639 11 ай бұрын

You show the HC06 but then don't show how to connect it or (the issue I am having) getting it into AT mode as it doesn't have a button. Any other vids or suggestions?

@puntergaming2455 2 жыл бұрын

Sir I have a question that can't we use a remote which can connect to the bluetooth module and cantrol what ever we want but why we only use our phone so plz can show us how can we do it??? Love from India ❤️❤️

@dlofton123 Жыл бұрын

The current name of my buetooth HC-05 does not show up when scanning on my windows PC

@chuicoevenmerk 2 жыл бұрын

Can I make the Bluetooth. Or configure it as Bluetooth speaker only?

@chalanisiriwardhana8426 2 жыл бұрын

This tutorial is very good but I couldn't change baud rate. Can you give some advise for that please?

@DIYGUYChris 2 жыл бұрын

Have you tried the appropriate AT command line for baud rate changing?

@hannahwilly3841 4 жыл бұрын

Hello MEGA DAS Good video as always

@DIYGUYChris 4 жыл бұрын

Thanks for your comment I hope you will be the 1ST prize winner 🏆 Let us know if we can further assist you

@nkostelidis 3 жыл бұрын

Hello. Is it possible to change data bits from 8 to 7 with AT commands?

@bencypg 3 жыл бұрын

Not able to set AT+POLAR,1,0 using USB to serial convertor. All other command works fine. Tried 3 different HC05 and also different USB to serial convertor but only this command does not work. Please help

@alhapidzteguhgumilar 3 жыл бұрын

THANKS. IT WORKS!

@DIYGUYChris 3 жыл бұрын

Congratulations 🤗

@maddilasumanth7888 3 жыл бұрын

When I type AT then I am not getting ok or ready. White blank screen only visible. Please slove this problem

@DIYGUYChris 3 жыл бұрын

Hello Are you setting the appropriate baudrate?

@bananakids_1212 26 күн бұрын

⁠@@DIYGUYChrisSame issue, yes the correct baudrate was set

@yaacho 3 жыл бұрын

you saved my life :D Thank you!!!!!!!!!

@DIYGUYChris 3 жыл бұрын

Welcome anytime ☺️

@marsanishadraa 3 жыл бұрын

this is a great video, thank you, but why when I open serial monitor the reply that I got is nothing? not OK like in your video

@DIYGUYChris 3 жыл бұрын

Probably you are not setting the serial monitor baud rate as same as the one you set for your Arduino Serial! Check it and check the wiring diagram as well.

@michellejacob2566 Жыл бұрын

Hey, I have a doubt. As soon as we connect it with Arduino and enable it, we will get to see its name in the bluetooth option on phones?

@DIYGUYChris Жыл бұрын

You will see the name on phone Bluetooth search as soon as you power the module, with or without connecting it to Arduino, as soon as you wire the VCC and GND pins.

@friendsbirdfarm8501 4 жыл бұрын

I want expect more about arduino

@DIYGUYChris 4 жыл бұрын

Thanks for your comment I hope you will be the 1ST prize winner 🏆 Let us know if we can further assist you

@berkytatchom 5 ай бұрын

I'm writing a comment😊

@leowai769 4 жыл бұрын

Great info. Thanks

@DIYGUYChris 4 жыл бұрын

Thanks for your comment I hope you will be the 1ST prize winner 🏆 Let us know if we can further assist you

@rupakomati781 2 жыл бұрын

What is full form of HC in HC06

@alhapidzteguhgumilar 3 жыл бұрын

How about at command for Esp32? Can u do that?

@ioanesichinava6668 3 жыл бұрын

Hello, I have next problem. I changed Name, But when I Change PSWD it save on serial monitor and not connect Mobile, it is write " incorrect Pin or PassKey" why? thanks

@R2KSASA205 2 жыл бұрын

What is typing in the program please reply

@agi1a1or 4 жыл бұрын

Excellent video!

@DIYGUYChris 4 жыл бұрын

Thanks for your comment I hope you will be the 1ST prize winner 🏆 Let us know if we can further assist you

@ariviyalarivom6507 Жыл бұрын

can we do this using arduino uno? or does it requires a controller with two rxd and txd pins?

@DIYGUYChris Жыл бұрын

You can do it with Uno because of the simple reason that the Uno microcontroller is similar to Nano microcontroller, follow the same wiring as mine and use the same code

@Amine-dlmr 2 жыл бұрын

Why i dont see anything on my serial monitor?

@Amine-dlmr 2 жыл бұрын

ive tried all the baud rates and double checked my connections. My HC-05 is in AT-MODE and nothing appears. Even when i try easy ON/OFF code with an android device, nothing show up. What can i do about it?

@livinginOrwells1984 Жыл бұрын

Hi Chris, can you tell me if I can use the 'D0' and 'D01' pin that are labeled 'tx' and 'rx' instead of the D2 and D3 pins you show? Please help! :)

@DIYGUYChris Жыл бұрын

Hi The Rx and Tx pins of Arduino are occupied by the Serial monitor but you can wire the Bluetooth to those pins after completing the Bluetooth AT command configuration. Let me know if this is not clear enough for you

@livinginOrwells1984 Жыл бұрын

@@DIYGUYChris Okay thanks Chris, really appreciate it! I finally got it AT commands working and connected again and will try those tx and rx pins and lyk. Cheers!

@livinginOrwells1984 Жыл бұрын

@@DIYGUYChris Forgot to ask...what do I have to type in code to upload after switching to tx and rx pins? 'D0' and D1' or some form of tx and rx?

@sarthakmishra5418 2 жыл бұрын

Sir I am a beginner and having a lot of interest in Electronics. I study in class.7 and learning programming c++ and python since class.3 I want the NANO board.

@timm3802 2 жыл бұрын

AT command to change pin, need to be in " " - else it will not work. AT+PSWD="2022" will work.

@Soul-ro7pm Жыл бұрын

It doesn’t say ok

@ahmeda4717 3 жыл бұрын

Thank you for a great video Sadly I wasn't able to upload codes even though I did the AT commands with no problem

@somisettyyashwanth3887 4 жыл бұрын

Nice video great info

@DIYGUYChris 4 жыл бұрын

Thanks for your comment I hope you will be the 1ST prize winner 🏆 Let us know if we can further assist you

@jagdish_aneshwar 4 жыл бұрын

Can you make smart glass

@alexmarie33 2 жыл бұрын

You are the best

@DIYGUYChris 2 жыл бұрын

Thank you 🤗

@MynameisBarry 2 жыл бұрын

if you have ERROR:(1D) for changing the password: try this AT+PSWD="1234"

@y0uyo 3 жыл бұрын

Thanks

@anotherbrick55 2 жыл бұрын

You didn't give any information about non-buttons.

@karanbhardwaj3599 4 жыл бұрын

Pls make tutorial video on NodeMCU esp8266 + Arduino Uno and make communication between them

@DIYGUYChris 4 жыл бұрын

Thanks for your comment I hope you will be the 1ST prize winner 🏆 Let us know if we can further assist you

@Andi-gy6dj 4 жыл бұрын

I request the project, which is the project to update the clock using a cellphone via a Bluetooth connection

@DIYGUYChris 4 жыл бұрын

Thanks for your comment I hope you will be the 1ST prize winner 🏆 Let us know if we can further assist you

@ElectroRetro 4 жыл бұрын

Great video

@DIYGUYChris 4 жыл бұрын

Thanks for your comment I hope you will be the 1ST prize winner 🏆 Let us know if we can further assist you

@DIYGUYChris 3 жыл бұрын

🎉🎉Congratulations 🎉🎉 You have won the 2nd prize🥈 of the gave away program which is 30USD that you can use in JLCPCB platform to order some PCBs🤩 Please write your username of your JLCPCB account. If you are not registered yet then you can go to JLCPCB.com and create your account then write your username here in a comment 🎉🎉🎉🎉🎉🎉🎉🎉

@ElectroRetro 3 жыл бұрын

@@DIYGUYChris electronics220903 This is my username.

@DIYGUYChris 3 жыл бұрын

@@ElectroRetro coupons sent to your account. Kindly check 😊

@ElectroRetro 3 жыл бұрын

@@DIYGUYChris I received the coupon, Thanks.