You asked "I hope this video is educational for you". Yes, the video was instructive, and I recognize in you the potential of a teacher. Good that you have not linked the code, it's better to understand everything and implement it yourself. you got a like and won a subscriber

THANK YOU FOR SAVING MY LIFE! after days of trouble shooting i finally saw what a REAL board should look like. I HAD A BAD CABLE! i had no idea that it had leds at the back or a bunch on the top mine only showed one yellow blinking. your clearly intelligent nobody ever showed these facts.

I've just looked at a bunch of Arduino Ethernet primers and for the most part they are junk. Yours is great. Very informative.

Just followed your instructions, to the letter and it worked perfectly first time. Thank you for a very very good lesson. God Bless.

Well done ! (maybe a serial resistor with the LED would be more orthodox? )

great video! One of the best Arduino tutorials I have done!

Its possible to use this library in Esp32 or there is a library specific to the Esp32 ? My question is, how to connect my Esp32 in router and internet with cabe ?

can you read two separate analog signals and send the data to google docs using Ethernet shield? if so a video would help greatly.

Finally I control LED over internet(anywhere of the world). Thanks. I get Idea from you

Thank you sir for the valuable work. It really helped me.

if we use phpoc shield, will all connections remain same? or after stacking them up, do we need to connect them will some separate way? please reply

Goede uitleg !!

This could be used anywhere or just for local area network

good tutorial thanks glynn

Is the Mac address always sama each module? If not, where i can get it because my module no Mac sticker addres's

I don't know if you can help ive bought a wiznet w5500 ethrenet device iam using your code and I get an ip address but I don't get a link status lights on the rj45 connector the cable iam using works

Thanks for the tutorial it was really helpful I have tried to butcher your code a bit to control a stepper. The HTML displays on a website with the button: I added the following loop below to try and control the stepper but it doe not seem to work. Any ideas?: if(readString.indexOf("?button1on")>0) { stepper.setCurrentPosition(0); while(stepper.currentPosition() != 600) { stepper.setSpeed(400); stepper.runSpeed(); } delay(2000); }

Thanks for sharing! everything is perfect, but the led wont turns on ... can't understand why.

Very Useful video.... Thank you

thank you after I followed your tutorial, my program can run well. I have a question whether you can give me a tutorial to display the message on the P10 matrix LED with the Controlled HTTP Requests webserver?

Very good explanation of the ethernet shield for arduino. I have a challenge been dealing with for some time. Can I control two lines of video from an digital cctv camera that is not IP? The camera is a Samsung SEB-1005R with an RJ45 connector but the wiring is NOT for 10/100/1GbaseT instead it uses the internal 3 pairs to transport 12v and the video signals on one pair. I have used the RCA yellow cable to connect to my TV and it works fine. I want to view this camera input on a web server. Does arduino has a library for working with video this way? Anyone with information please feel free to comment.

How can i add 2 liner dispaly and control other from connecting to my internet? Like internet vendo? Can u help me sir?

Do you know auto negotiation in w5500 Ethernet shield.... kindly help me sir ..I'm completely stuck with this..

Best Video Explain😊

Nice one, i need this to pass my project. thank you

nice cod , thenk you

Thank you verry much for this video , can we use instead of web page and html a Labview application ?

please Can you help me in the program to control two leds , I am a student in data network.

how did you formulate the mac address. what does these things mean?[ 0xDE, 0xAD, 0xBE, 0xEF, 0xED ] what do the "letters" mean? i have a mac address im using Ubuntu 16.04 and my network gives me information and claims my mac address is 12:A0:

I tried doing d way u have done sir but I'm getting error as when I click buttonoff d led turned off after delay of few msec it automatically turn on without cliking ledon button why?

thanks for the tutorial, how about a webserver using ultrasonic in ethernet module?

Thanks

Can you please explain how can someone make a webpage to operate multiple Arduino from same page (different set of button for each)

is there other commands that you can tell me about as well as the ones shown in the video for creating the web page like maybe link to commands thanks glynn

Good day binary update, I have an issue of connecting my arduino ethernet shield to my network. In my working place i have a 16 port cisco switch that connect all devices together with a desktop computer (using this IP address: 192.168.0.1-255, subnet Mask:255.255.255.0). i use the desktop computer to log into any device interface and do whatever I want, So I manually assigned this Ip address to the arduino ethernet shield because I have no router, but the desktop cant ping the ethernet shield....... PLEASE HELP ME what to do

and it is connected to desktop application?

won't show anything when i put the ip into the url bar

Can you upload a file with the code ?

when is the readstring variable defined? or rather how?

Hello... I want to connect 2 points A and B. Each point has an Arduino Uno, Ethernet Shield w5500, router and access point. accesspoint in point to point mode and ip settings in 1 network. The distance between points A and B is 1 km. Can the arduino at point A and B communicate with this topology? thank you very much

Can you please share Arduino connected LED will be controlled from anywhere in the world using MQTT Protocol

Hello mate...do you have this kind of setting but control servo by using Logitech usb joystick?...and a button to make the servo back on it's original positiol..

mac address 12:A0:50:D5:F7:7F how do i change it to your format?

getting a error readstring was not decared in this scope

Does the computer also need an internet connection to the model?

Can u please included code in description

how that script worked without /BODY is what I don't get... - also, did your LED have a built in resistor?

Hi, I was trying to do this project and I established everything but when I try to enter the server it just gives me a white screen can you help me fix it?

is it possible to control led from anywhere from world with internet or, only on local web server?

Good Tutorial. I have a question . Can we control this led over internet?

Is it possible to make the page inside Wampserver's localhost server and pass the information to the arduino?

Is your website responsive?

i need a program as like this if my select temp high or low send a mail in my address and i can monitor the temp in ip address i already make a program its only send sms but i cant monitoring by ip please help

any help would be appreciated

cant see the buttons

How connect laptop to router and ethernet please how to syinchron

Hello, is it posible to run php code on the webserver?

I need HELP,…. I create my own .html file, how i put the file on arduino to read when i click a button activate led??

when i upload the code and open serial monitor it takes to much time for arduino to react and it gives me 0.0.0.0 what i have to do please anyone can tell me? thank you

How is this working without resistor?

Please provide these arduino purchase links

Can i get the code

why im getting server is at 0.0.0.0?

Arduino : 1.8.16 (Windows 10), Carte : "Arduino Uno" hi , thnk you for video , but i have a problem see this my message. avrdude: ser_open(): can't set com-state for "\\.\COM3" Une erreur est survenue lors du transfert du croquis Erreur durant la définition des paramètres du port série: 9 600 N 8 1 Ce rapport pourrait être plus détaillé avec l'option "Afficher les résultats détaillés de la compilation" activée dans Fichier -> Préférences.

Can we download the code somewhere?

Can to web server IP public?

Can you send the source code on reply.

i cant access the ip address

Working code from video: pastebin.com/0Asb8MX3

Nevermind, I answered my own question.

CODE PLS

Lots of ramlbing on, and without code waste of time.....

Can not give local ip address perfect

Very interesting video

let the code please

Can you upload a file with the code ?

Can you please tell how can I send a mail on ethernet shield?