im a young electrician in uganda, but ive learnt alot from your tutorial
@L2.Lagrange5 ай бұрын
16:15 that app seems super useful for basic prototyping. Edit: It only took me a few moments to get working with my basic Arduino project, thanks for the tutorial!
@wadebrewer72125 ай бұрын
This isome of the slickest videos I've seen all day working on amd learning this stuff. Bravo....thank you for taking the time amd sharing.
@PaulMarriott5 ай бұрын
Thanks. Much appreciated.
@ayoubboukerch31302 жыл бұрын
thank you you are perfect You deserve fame 👍👍👍
@Ahmed_I.Q5 ай бұрын
Absolutely amazing 🎉
@PaulMarriott5 ай бұрын
Thanks.
@AllynVibes10 ай бұрын
Exactly what i was looking for, thank you! Some thing appear to have chnaged since this video. I seem to have so much right but not enough to get it to work. For some reason all " rooms are being triggered once the progran is uploaded, and it appears I have no bluetooth communication. Mega 2560 HC-05 Using digital pins 22 23 24 Voltage divider circuit in place
@mecatx Жыл бұрын
great vidoe, but i must have missed it. What devices turn the lights on and off around the house. Thank you.
@kenobz1547 Жыл бұрын
Hi could you help to trouble shoot? I’ve done everything exactly like how you did! Including the HC-05 configuring, everything connects well on the mobile application but the serial signal doesn’t seem to get through as the LEDs don’t turn on
@fazilhabeeth28 күн бұрын
There is no extension like PCm in blockcode application
@VishalJaishwara2 ай бұрын
The Mblock code link is not working. After downloading the code it says " The devices or extensions necessary for this project are not published yet, so the project fails to work as intended." Please help what to do next. I also tried the Arduino IDE link and uploaded the code in Arduino Uno board too. But nothing is working. Where am i mistaking?
@Tiparium_NMF2 жыл бұрын
Cool video, but why mBlock? It's such a weird way to write code.
@MrBobWareham7 ай бұрын
Very interesting, but I wonder what the range of the Bluetooth is??
@Techreux10 ай бұрын
OK, if I don't want to use Makeblock (security risk), I assume that the standard Arduino editor with IDE script should suffice? Make programming and uploading the HC05 code rather complicated, I assume as well..
@egvideos70939 ай бұрын
Loove videos like this one! But my issue is that im using the HM10 and i can't turn on the LEDs and the app can't connect to the Bluetooth Module 😞
@user-wi7qe4ck2l4 ай бұрын
the extension u have uploaded on .can i use it if i have nano Arduino not uno? please answer
@domosthenesdomosthenes321810 ай бұрын
I believe I followed everything mentioned but when I enter the "5" to turn on pin 5 (or any other pin) nothing happens, what did I miss?
@ananyabhatnagar6070 Жыл бұрын
after all this process its still not running what should i do ?
@kobeasselberghs2 ай бұрын
i need to use all digital13 pins, how do i do that?
@danielamolina57434 ай бұрын
Hi, could you use the Arduino Uno instead of the Arduino R3? I don't have the Arduino R3, I will appreciate your response.😁
@PaulMarriott4 ай бұрын
Arduino Uno & Arduino R3 are the same thing.
@Tiparium_NMF2 жыл бұрын
I'm running into an issue where the Bluetooth just doesn't seem to be connecting. According to the app it's connected to the Bluetooth module, but I added a case after the *if(Bluetooth.available())* function that sets my lights in a blinking pattern, and they just won't stop blinking. I'm not sure why the app could say it's connected when the Bluetooth module seems to think otherwise.
@joshuaseguerra5803 Жыл бұрын
Sir goodday! can you help me with my project. i have 1 problem left to finish my project. how can i code my hc-05 bluetooth module, to auto turn off a led in arduino if the bluetooth connection is loss.
@anastarafder26378 ай бұрын
I tried to setup the circuit exactly as you did but when i plug in the power, my LEDs keep flashing one by one. Is this normal?
@TechnoEveryday2 жыл бұрын
🆒 Thank you so much for uploading this video. 👍👍👍👍👍 Sharing with community 🇵🇰
@fernandofullgraff2528 Жыл бұрын
Thanks so much. I made it !
@relaxationheartmusic456 Жыл бұрын
vous avez trouvez cpm hc-05
@santhoshreddy20145 ай бұрын
I want an app which the sends Mobile notification as a command to hc-05 bluetooth module .please help me anyone
@geriebosman2 ай бұрын
where is your extension in mblock5 I cannot find it. Or is it not for the arduino Nano
@PaulMarriott2 ай бұрын
Likely not within Arduino Nano, but whatever you program for Uno board should be compatible with Nano.
@geriebosman2 ай бұрын
@@PaulMarriott thanks, i wil try it.👍
@geriebosman2 ай бұрын
@@PaulMarriott thanks👍👍
@JohnnydimaGamer Жыл бұрын
Amazing video. Is it possible to make this same system work with voice control?
@paulsmith95742 жыл бұрын
Is there not an issue with feeding a 5 volt signal into the RX of the HC-05? I see that most other users place a resistor divider on that line.
@PaulMarriott Жыл бұрын
Good question. All I can say at this stage is I’ve made a number of devices w/HC-05 and have had no issues thus far with the higher voltage.
@JukaVKcro Жыл бұрын
Nice video!! How can i use different pins for RX and TX. I tried but it is not working. And how can i send int instead of char?
@snouzz-gaming2 жыл бұрын
15:36 i can see it but can not pait ... it says an App is needed for using it ???
@charlenestanley8035 Жыл бұрын
Do I really need to configure the Bluetooth module? I didn't realize I had to 😌
@user-yr3cj4xz2c Жыл бұрын
thanks bro
@stetco_c2 жыл бұрын
why it doesn't work with arduino mega 2560?
@TechnoEveryday2 жыл бұрын
Should work
@egvideos70939 ай бұрын
Did you make it work?? I have the same issue.
@HA_Black-Bot Жыл бұрын
Can't find your extension What should I do?
@RznovfpsАй бұрын
if none of them are working try 9600 baudrate
@logan96452 жыл бұрын
How to open the code link it says can't open after downloading plzzz help me
@shamsheralamraja Жыл бұрын
Nice
@adilabusafa Жыл бұрын
أهلاً وسهلاً ومرحباً-يتعذر التعليق-لا أعلم .
@Khalfr Жыл бұрын
sir, can you recoding it in Arduino IDE ?
@PaulMarriott Жыл бұрын
Good idea! I will see what I can do. Thanks.
@leonigonzalez5962 жыл бұрын
Alguien. Me puede decir si se puede con un módulo HM-10
@egvideos70939 ай бұрын
Intentaste usar El HM10?? Yo he intentado pero nada.
@msnephophilia8750 Жыл бұрын
Can we do it with Arduino nano?
@dhaniofficialll11 ай бұрын
If without a breadboard, is that possible?
@PaulMarriott11 ай бұрын
Yes, it is possible.
@md.faysalbiswas5098 Жыл бұрын
Can't find your hc 05 Bluetooth pcm on mblock 5.4.0 What should i do
@PaulMarriott Жыл бұрын
Oh dear. It's likely the admins of mBlock have removed the extension (for whatever reason). I will need to investigate to see why it has been removed. Thanks for letting me know!
@PaulMarriott Жыл бұрын
I’ve checked again (as of Fri 21/4) and the HC-05 Bluetooth PCM extension appears to be back. Must’ve been a glitch earlier.
@zanli4982 Жыл бұрын
can the led be multiply? example: 9 led
@PaulMarriott Жыл бұрын
LEDs can be multiplied, but the amount of buttons cannot be.