Arduino Prototyping Techniques

Рет қаралды 2,962

Күн бұрын

What's next? Truth be told, a lot! Going to market is a big undertaking, and in this video I'll cover just a few things that will make starting this exciting journey a little less painful. I could do a whole series on going to market. If you are interested please like and subscribe...it's very motivating & appreciated! 👉 Leave a tip via cryptocurrency if I've helped you out:
Bitcoin: bc1q2whh7h7nddf6lzzsns6phxdf2pyr6z0pvgy98t
Doge: DDgFpxEsBTdjgJDg3vxwuagia9UU5UmSVL
Etherium: 0x952e75561491951C50561b76eCFFFE1AC493d495
XRP: rPVaL4TNr3aMPhwgYsWZdgirM99S9QnfCA
Polkadot: 15pNwwPAsMwi59cMJC441P6KwYzCsq9WqQu156FF8KffRaee
Prototyping Supplies:
• Inexpensive Arduino Compatible Kit -- amzn.to/2Dfqs5U
• A More Deluxe Starter Kit -- amzn.to/3g9nFtR
• Jumper Wire Kit - amzn.to/3f9rtK4
• Breadboard Kit - amzn.to/3hIEPib
• Amazing Perfboard -- amzn.to/30Sj6O9
• WaveShield Kit -- amzn.to/3g9vMq6
• Motor Shield Kit -- amzn.to/3hISQfL
• Adafruit Circuit Playground Kit -- amzn.to/39yBfo9
• Makers Notebook -- amzn.to/3jHOYh3
My Camera Equipment:
• Primary Camera -- amzn.to/3fewxgA
• Camera Kit -- amzn.to/3jQvaI8
• Primary Lens -- amzn.to/3jQvaI8
• Macro Probe Lens -- amzn.to/3jQvaI8
• Main Light -- amzn.to/2X1SwB6
• Secondary (RGB) Lights -- amzn.to/3jQvaI8
• Mini Lights -- amzn.to/3jQvaI8
A few other FREE sensor tutorials you might like: (I have 100's!)
• Cellular Data shield - • Arduino Prototyping Te... z
• Capacitive Sensing - • Arduino Prototyping In...
• Luminosity Sensors - • Arduino Prototyping In...
• Thermocouples - • Arduino Prototyping In...
• Sensing Vibration - • Arduino Prototyping In...
A few other sensor tutorials you might like: (I have 100's!)
• Cellular Data shield - • Arduino Prototyping Te... z
• Capacitive Sensing - • Arduino Prototyping In...
• Luminosity Sensors - • Arduino Prototyping In...
• Thermocouples - • Arduino Prototyping In...
• Sensing Vibration - • Arduino Prototyping In...
And some playlists on prototyping with Arduino:
• The Basics - • Arduino Prototyping: T...
• Inputs - • Arduino Prototyping: I...
• Outputs - Arduino Prototyping, Techniques - • Arduino Prototyping Ba...
• Complete Prototyping Series! - • Arduino Prototyping: T...
Instagram - / marcdevinck
Twitter - / devinck
My company, Panoptic Labs - www.panopticlabs.com

Пікірлер: 20

@devashishtambade9593 Жыл бұрын

Just completed your all 111 episodes ...I'm so overwhelmed and so clear about my Arduino journey now ....Thanks for the knowledge ...lots of love .

@shakthivel8922 2 жыл бұрын

Nice channel... Lot of hard work..... 💔Low views

@jasonkocher3513 Жыл бұрын

The specifics of FCC and UL approvals are a huge barrier to market entry for inventors - something I personally believe should be fundamentally changed to allow a lower cost fast-track for "makers". If we could change the status-quo, then inventors could stop spending other people's money, stop going bankrupt, stop screwing investors, etc., and start to have more bootstrapped startups succeed in a product launch and re-investment of self-generated funds.

@MarcdeVinck Жыл бұрын

Totally agree, as long as unsafe products don't get to market. In particular, FCC costs are way too high!

@darellegabua9034 Жыл бұрын

sir can you do priority numbering system using arduino with esp8266 with remotexy to control it

@donaldklopper Жыл бұрын

You're simply wrong about having to open source your source code on Arduino, unless that source is modification of core Arduino libraries themselves. This is typical of any open source project library under eg LGPL.

@MarcdeVinck Жыл бұрын

I say you may have to "potentially" share your files, the key is "potentially". Most people grab code from other projects and it's almost always CCSA or attribution. So, yes you most likely do have a moral obligation to share the code, but not always. These are all things to consider, no laws, but certainly ethical considerations.

@lrita7179 Жыл бұрын

Hi Mark. Just discovered your YT page, and it's fantastic! Are you still producing new YT content - looks like its been a couple years. Thanks.

@MarcdeVinck Жыл бұрын

Yes, but I’m different platforms for now. I have some popular courses on LinkedIn Learning! And with the right sponsors, I’d happily do more KZfaq videos. (Ads don’t pay enough anymore)

@ikks9312 4 жыл бұрын

Hey Mark, can it be done to have 3/4 different cameras, that snap a photo in the same moment?

@MarcdeVinck 4 жыл бұрын

Sorry for the late response. No sure what project you are talking about, but if it's the camera capture one, sure you can fairly easily add a 2nd camera. Although it might be easier to use something like 2 ESPeye camera modules and sync them later. www.espressif.com/en/products/hardware/esp-eye/overview

@kuchalaggyan2502 3 жыл бұрын

YOu are the only KZfaqr, who replies quick. you are the best. I am working on a project but this time instead of Arduino there is raspberry pi and there is no video available on your channel. I am using proteus for the simulation. can you help me out to use raspberry pi on the Proteus simulation? I am facing some error. I think the error is the python compiler not available on the proteus.

@MarcdeVinck 3 жыл бұрын

Sorry, I don't have anything on the Raspberry Pi, or Proteus. I tinker around with the Pi, but I don't use Proteus.

@kuchalaggyan2502 3 жыл бұрын

@@MarcdeVinck you mean, tinker card

@supriyazarariya5492 3 жыл бұрын

i made a prototype and even if i made a small company so how will i market it in a country.

@MarcdeVinck 3 жыл бұрын

That's a big question, and one that I deal with every day. Marketing is a strange thing with the internet and social media. I can't give any real advice without know a lot more information, as it depends on if you are b2b or b2c, direct to consumer, etc. In general I do believe that openness, transparency, and community are key factors for a good marketing plan. Create content and make relationships! Good luck! Thanks for watching and commenting!

@cinclarationc2246 4 жыл бұрын

Hi Mark! I'm looking to take an Arduino project I made and turn it into an actual product. I assume you are a busy person, Is there any chance you can give me further advice and/or direct me to an individual who may help me with the process?

@MarcdeVinck 4 жыл бұрын

Sorry, this comment went to spam?! Please reach out with more details to info@panopticlabs.com. Thanks!

@abstractaffair 3 жыл бұрын

@@MarcdeVinck Congrats Marc, your videos are great and clear. In particular, thanks for this very good advice. I am in a similar situation....would you mind I write you an email too to explain and perhaps get some specific advice? Thanks!

@MarcdeVinck 3 жыл бұрын

@@abstractaffair I'm not able to take on any more projects at this time. Sorry.