please don't stop after lesson 68! this is so awesome! You are a very good teacher, and there is no one out there like you :D

Loving the series. Drinking beer though, kids and wife are asleep and I'm geeking out in the garage.

You sir, are the Organic Chemistry Tutor of Arduino. I always go to your videos if I want to continue in learning arduino. Great teacher, love to see more of your videos.

I've finished 28 lessons in 4 days and have completed all the homework and lessons including this one. I retired from teaching jr high coding and robotics. We never got into programming Arduino and I always wanted to, so I bought an Ellego and Vilros kit and when they arrived, I started on your lessons and I am having a blast.

I started out wanting to get a Technicians license for Ham Radio. Flash forward two years later and I have an extra class license, I went back to school to become certified in IoT, just so I could build my own SDR radio. I now teach Arduino and and Raspberry Pi classes to teenagers. I built an electronics lab in my house as well. I decided to work through all your videos because I recommend them to anyone wishing to learn this type of material. My teaching has greatly improved due to your videos. I am so glad that you explain the math and get students to try things on their own. I came up with a similar sketch (although I prefer to call it code) when trying to do it on my own. I'm currently working on a self driving robot car based on the Arduino platform. I could do this stuff all day and night! Thanks for the great lessons!

As a professional programmer, I thought I could do this on my 1st trial. I finally got it to work (after trying hundreds of times, with sips of coffee, and believing holding my breath will help) when I found out that delaying the loop was my only solution. I had doubts that what I did wasn't the best way of doing it. And then I saw it at 18:42 that explained what I was missing. And now I can't sleep because of the coffee :) Nevertheless, I finally felt the true satisfaction of saying "BOOOOOM!"

I attempted this on my own, and got as far as assigning an independent tracker - in my case I used a boolean. What I did not think of was using && , so I kept falling down, cycling through random states. I also did not think of placing a small delay in the loop to make things a little cleaner; that was a very useful lesson. I then watched through and, although I wasn't able to work through it alone, the lesson afterwards made a lot more sense for having at least tried! Thanks Paul!

Hi, Paul...got to be honest with you, I couldn't work this one out by myself! The problemo was a tad confusing to solve, Old Bean, and after many cups of tea and a whole lotta head scratching and coding errors, I gave up and admitted defeat. The answer to the problem was even harder than I had imagined, so it was a good job that you went on to explain how to overcome this particular problem. Thanks again from across the pond....hope all's well over there with you and family, what with all this Coronavirus malarky. Stay in...stay safe...and stay "switched on".....pardon the pun. Regards....the Grumpy Limey.

Have to admit, this one stumped me. Thanks for walking us through it.

I was lost. You had to 'baby step' me through this one and that's okay. I'm here to learn. And you sir, are a teacher.

Just wanted to share how I made a toggle switch, minimal code: int swPin=8; int LEDPin=10; int LEDstate=0; int j; void setup() { // put your setup code here, to run once: pinMode(8,INPUT); pinMode(10, OUTPUT); Serial.begin(9600); } void loop() { // put your main code here, to run repeatedly: int swVal; swVal=digitalRead(8); if (swVal==HIGH){ LEDstate=abs(LEDstate-1); digitalWrite(10,LEDstate); Serial.println(LEDstate); delay(500); } } Using the ABS function returns either 1 or 0, opposite of the previous state. Thanks for all the great lessons.

I have been watching the series (old as well as the new and improved) repeatedly. Here is the thing for me. If you listen once, you heard it...if you follow along...you copied it...if you do it on your own after the previous, you remembered it...but, if you can create from what you have done previously, you have gained experience and knowledge, therefore...you have learned. I have LEARNED things by reviewing and practicing via your lessons. The things I have taken from your lessons is far more than I learned from dozens of books. For this I thank you, and ask that you continue to keep it simple and speak in "English" vs. speaking in trueNerd (bumpy text used there just for you). Keep up the good work!

Hey Paul, I'm really enjoying your new Arduino series. Please keep the lessons coming. I can tell you are a great teacher and wished you had been my high school science teacher many years ago. I often feel like I am back in high school science class during the sessions. This was the most challenging exercise to date. Took me a couple of tries to dust off enough brain cells to reach a solution. I always try to complete the lesson before watching your solution. BTW, I am using parts of your series as inspiration in teaching my six year old grandson about electronics. He loves working with the Arduino.

Honestly, toggle switches are the bane of my existence as I have always had issues with making them in both programs and videogames, and it's really annoying too because I have made very complex logic systems and made flight control chips using logic gates in games like Scrap Mechanic but I couldn't make a toggle switch, but now I finally found a way that works for all scenarios thanks to this video. Amazing teaching Paul!

i forgot to mention in my previous comment, that your code is simple, elegant and clever and very important, validated. You kept the button pressed on to ensure it will not change, simple but effective validation.. WELL DONE!!!!

18:04 is the funniest part on this series yet! Thanks Paul!

I was able to use your tutorial to turn an ultrasonic sensor into a switch whenever it read a value under a certain number. Thank you so much for making the tutorials you do, you explain them very well and cover a lot of very useful things!

I've been looking at the code over and over again and it's amazing how efficient the code is. It's quite confusing at first but I am starting to understand why it works. Many thanks for showing how to use a pushbutton as a toggle switch!

I was not able to do it by myself, but I saw the light when you mentioned that we should consider the previous logic state and the actual logic state of the button!!! That was a great insight!! Your videos are fabulous!!!

Great video series, thanks very much Paul. I came at this problem in a slightly different way: since the LED modes are binary (at least in this scenario), if you do a button counter (i++ [or j++]), you can then write an "if" statement to check if it is an even number - LOW if even, HIGH if odd. This also gives an advantage of being able to count the number of times the LED has been on & times button has been pressed (if you add a Serial.print!).

Hi Paul! Your Arduino tutorials are amazing. Your teaching approach is "most excellent" and inspirational! I tried this tutorial and solved it with a while loop and two if statements. It was a great feeling to achieve this on my own. Keep up the good work, sir! Thanks again!

I've been binge-watching these tutorials lately, ever since 2015, I've been trying to figure language out but couldn't at least until now, You made this very easy, and I'm finally understanding how it works, most importantly remembering it, it's hard to remember some things when you have a learning disability, so tysm for making this easy.

Many thanks again Paul. I am just loving these awesome lessons! ❤️ I made an addition to the task for myself. Led will be on on every 3rd release of push button. Codes below: Variables int ledPin=2; int buttonPin=4; int buttonOld=1; int buttonNew; int ledState=0; int dt=500; Void setup(){ Serial.begin(9600); pinMode(ledPin,OUTPUT); pinMode(buttonPin, INPUT); // I AM POWERING THE BUTTONPIN USING A 5V VOLTAGE OUTPUT SLOT IN ARDUINO. void loop(){ buttonNew=digitalRead(buttonPin); Serial.println(buttonNew); if(buttonOld==1 && buttonNew==0){ if(ledState==0){ digitalWrite(ledPin,LOW); ledState=1; buttonOld=buttonNew; } } if(buttonOld==0 && buttonNew==1){ if(ledState==1){ digitalWrite(ledPin,LOW); ledState=2; buttonOld=buttonNew; } } if(buttonOld==1 && buttonNew==0){ if(ledState==2){ digitalWrite(ledPin,LOW); ledState=3; buttonOld=buttonNew; } } if(buttonOld==0 && buttonNew==1){ if(ledState==3){ digitalWrite(ledPin,LOW); ledState=4; buttonOld=buttonNew; } } if(buttonOld==1 && buttonNew==0){ if(ledState==4){ digitalWrite(ledPin,LOW); ledState=5; buttonOld=buttonNew; } } if(buttonOld==0 && buttonNew==1){ if(ledState==5){ digitalWrite(ledPin, HIGH); delay(dt); ledState=0; } buttonOld=buttonNew; }

I'm back: It's been 4 months since I had been able to be for these wonderful classes and one of the reasons was because I had actually stuck in this example, this extra time I have dedicated to study a little math and take a look at one or another Arduino book while I fed my brain with other classes of the Incomparable Master Paul McWhorter, The result has been wonderful, you teacher really do magic in the heads of those who really want to learn. And even though the code had come out to me, I finally discovered that there is not only one way to do it, well like all code.

Got this exercise suprisingly quick tbh but did it in a different way, I read the value of the buttonPin and when it's pressed I use a while loop to wait until the button is released again to then switch the state of the LED. This uses less variables (no old/new) and makes it a bit easier to understand in my opinion. Still very interesting to see how you did it! Discovering multiple ways to solve a problem is the best way to learn and really get a solid understanding of solving problems on your own. I only recently got a kit and even though I have some programming experience in Python I'm quite new to electronics and racing through the vids right now.

I tried many ways but never succeeded ..after watching this video i am feeling confident.. thanks so much

Another great video...my mother passed away a couple of years ago and she had this old flashlight that she always used. Her old flashlight will soon get an upgrade to an Arduino nano, as many LEDs as I can fit into the lens area and a variant of this toggle code. Also thanks to your Fusion 360 tutorials I'll be 3D printing and insert to fill the void of the battery compartment which will hold the nano and the batteries. Thanks for the inspiration!

I did this differently by using "while loops". I will post it for those who are just now working through these tutorials. The while loops are used similarly to how, in previous lessons, we used while.serial.available() to take wait for data from the serial monitor. In this case, they are waiting for the button to be released. This code is not as versatile as Mr.McWhorter's code, but does function exactly like his does. Note that the Serial.println() s throughout the code are for debugging purposes. //Paul McWhorter Lessons //"New Arduino Tutorials: 28 My Push Button Toggle Switch Code" //Composed by Jonathan Landers //May 9, 2023 //This is my successful attempt at writing code that uses a push-button //to toggle an LED on and off. int LED0 = 6; int toggle0 = 12; int toggle0V; int del = 100; void setup() { Serial.begin(9600); pinMode(LED0, OUTPUT); pinMode(toggle0, INPUT); digitalWrite(LED0, LOW); //Turn the LED value off everytime the program restarts. } void loop() { toggle0V = digitalRead(toggle0); Serial.println(toggle0V); if(toggle0V == 1){ delay(del); } else if(toggle0V == 0){ while(toggle0V == 0){ toggle0V = digitalRead(toggle0); Serial.println(toggle0V); } digitalWrite(LED0, HIGH); toggle0V = digitalRead(toggle0); Serial.println(toggle0V); if (toggle0V == 1){ while(toggle0V == 1){ toggle0V = digitalRead(toggle0); Serial.println(toggle0V); } delay(del); } if (toggle0V == 0){ while(toggle0V == 0){ toggle0V = digitalRead(toggle0); Serial.println(toggle0V); digitalWrite(LED0, LOW); } } } delay (del); }

As always- excellent, practical explanation - including debouncing the switch. My solution used logical not (!) on LEDState in the if statements.

These lessons are great! You are such an amazing teacher. Having said that, I will have to reread some of the code written to follow along exactly how the commands make up a toggle switch. As you can probably deduce from that, I was NOT able to come up with the solution all by myself.

This is my first comment, firstly have never enjoyed such Epic content like what you are creating here. I have never gotten so excited to learn before! I was up till 1am trying to figure this one out. Ended up going to bed thinking about this toggle switch. When I woke up this morning I just lay in bed thinking of what it could be. I grabbed a pen and paper and started writing out the code, I had in my head. I managed to get it to work perfectly using while and if statements. Thank you for these videos!

Hello Mr. Paul, I am a student in middle school but I have to really admit ur lessons are superb & the best thing I have seen that you are also teaching the lessons of raspberry pi & raspberry pi pico. but the main motive of commenting you now is that I've already figured out how to make the pushbutton a toggle one, you just have to write this code :- if (digitalRead(buttonPin)==0){ while (digitalRead(buttonPin)==0){} digitalWrite(LEDPin, HIGH); } else if (digitalRead(buttonPin)==1){ while (digitalRead(buttonPin)==1){} digitalWrite(LEDPin, LOW); } This code will definately work.

After hours of banging my head against a wall I finally managed to get it working, with a bit of help from google i admit. I did it a bit differently, I made a counter and each time you press the button it adds 1. Then if the count is at an odd number the led is off, if its an even number it turns on

Thanks for the tutorial! I was able to figure it out beforehand, however I used a slightly different approach. In my code, when digitalRead() detects a "0", I enter a while loop which continually performs more digitalReads() until it detects a "1". This indicates the button was released, so I proceed to do an LED state change which was quite similar to your implementation (though I used a boolean variable for LEDState rather than an integer).

I was definitely mistaken by the appeared simplicity of the homework. I then fell into my bad habit trap of overthinking the absolute hell out the problem. Gave up and felt quite silly when I came and saw the answer. I'm happy you gave us this assignment, it seems to have gotten most people thinking quite critically! You are truly one of the most amazing teachers I've ever had the pleasure of studying under (even though not in a typical sense).

Only did it with help from the internet! I managed to fathom out a toggle variable, button didn't track the button state. Not many of us would have realised that an 'Else' was required, as youv'e not shown this before. Made me think though. Keep up the good work.

After banging my head against a wall for a microsecond, I got my version running before watching the video. (my secret: I did hold my breath)

Thank you very much. Great. I've learned to do it with millis(), not delay()

I've looked up other arduino help before, and it's patchy at best. You lay it out and actually explain the content. You've answered questions I've long had that no one else has come close to answering. Thank you

Anyone else get preoccupied with code that they have written and never think of all the new things you're going to need for the new one? I'm going to start erasing all of what i've written before starting one of these "projects". Awesome job Paul!!! I'm trying to change my career path and these videos as well as this arduino are making learning to code SO much easier!!!!!

Hi, Paul🙂 Interesting tutorial, thank you very much as always) I did it like that before watching how you did it. const int redPin = 12; const int buttonPin = 10; int buttonRead; int redLEDState = LOW; void setup() { Serial.begin(9600); pinMode(redPin, OUTPUT); pinMode(buttonPin, INPUT); buttonRead = digitalRead(buttonPin); } void loop() { digitalWrite(redPin, redLEDState); int newRead = digitalRead(buttonPin); if (buttonRead != newRead && newRead == 1) { redLEDState = !redLEDState; } buttonRead = newRead; Serial.println(buttonRead); }

I got it myself by using 3 if statements and an On variable with 3 states 0, 1, & 2. If button = 0 & On = 0 turn led HIGH & On = 1 If button = 1 & On = 1 turn led HIGH & On = 2 If button = 0 & On = 2 turn led LOW & On = 0

I never thought that I'd learn so much from such a simple task! I figured it out my own way after a bit of head scratching but still thoroughly enjoyed how you broke it down and explained it. Love your videos and plan on using what I learn in my club, my future classes, and hopefully even one day on the job.

My new friend Gemini and I made the toggle switch slightly differently. Your excellent tutorials make it a lot easier to understand, and correct, the AI suggestions.

Sir please make lesson on SPI interface. . Thanks in advance..

This one stumped me. I tried to get the program to look at LEDPin and ButtonPin. I got it to come in and stay on but not turn off

Love how you instruct! Repetitive programming is the best way to learn. I've replayed and re-programmed many of your lectures! Thanks!

I couldn't figure out the coding on my own and had to see your code, then I had to watch the video 3 times to understand when the condition, "if(buttonOld ==0 && buttonNew==1)" became true, then the light literally turned on and I was able to understand. I am learning so much from you, keep up these most excellent tutorial videos.

Damn this pushbutton toggle is logic intensive. I need more brainpower lol

cant do it by myself! :(

I didn't figure this one out on my own, and when I saw your code, I still had to sit and work through it a while to understand what's going on, but I eventually got it! Thanks so much!

It is not a simple project at all like you said, but it was very interesting. I'm kinda embarrassed to say this but I had to spend 2 hours trying to work it all out because I didn't wanna rely on the answer. I used the voltage measure at the LED as the bright stage so that's why I declared an extra readled as an input. Thank you for providing such helpful videos about Arduino like this. Wish you all the best! P/s: Btw here's the code that I did: int readPin=9; int led=7; int vol; int ledvol; int readled=6; int i=1; void setup(){ Serial.begin(2000000); pinMode(readPin,INPUT); pinMode(led,OUTPUT); pinMode(readled,INPUT); } void loop(){ vol=digitalRead(readPin); ledvol=digitalRead(readled); Serial.println(ledvol); if(vol==1){ i=1; } if(vol==0){ if(ledvol==1&&i==1){ digitalWrite(led,LOW); i++; } if(ledvol==0&&i==1){ digitalWrite(led,HIGH); i++; } } }

man, all i had was "okay, when it goes from 0 to 1 it's gotta do somethin" but had no real idea how to make that 'somethin' happen til seeing it and now it's so obvious. Thanks for the great content!

I don't think any other code has such ingenuity with fewer statements but works without any glitches and oscillation, especially at the release of the switch. Moreover, the way you explained with the dots on graph is amazing. No one can match you. Thanks Mr.Paul.

I must admit.. this was the first asignment that i couldnt do by myself, i was trying for couple days and i watched video to see it done. Little demotivational but we are not giving up here!

Thank you Paul, for your wonderful lessons! Here's another way to derive the same results using fewer variables - the general idea is when someone pushes the button, change the inputs (signal) going to the LED, if it remains unpressed, then do not change the inputs (signal) going to the LED int buttonPin=12; int ledPin=22; int Signal=0; int readValue; void setup() { pinMode(buttonPin,INPUT); pinMode(ledPin,OUTPUT); } void loop() { readValue=digitalRead(buttonPin); if(readValue==0) { Signal=1-Signal; digitalWrite(ledPin,Signal); } if(readValue==1) { digitalWrite(ledPin,Signal); } }

That took me a long time to wrap my head around. I tried numerous things with counters and switch values but need to see your example and then "draw it out" several times to see why it worked. Very elegant in the end. Thanks

I will admit, it took all day tinkering with it, but I got it to work this evening!! Now, my reward it watching this video before I go to bed...

I learned a valuable lesson in this one....count your curly brackets. I followed along as you coded (I had tried it on my own and wasnt'y successful) so I was amazed when it didn't work. I checked my coding looking for my inevitable typos, I checked and rechecked my wiring, I even asked my software engineer son what I did wrong...but it wasn't until I had you in one window, and my code in another that I saw an extra bracket. BOOM...it worked!

I took a different approach. I tried to do something along the lines you did with multiple special variables to record button state, but couldn't figure it out. After two days, finally got it working by using four different while loops. The button press kicks the program from one while loop to the next. And the loops change the LED state. The advantage of mine is it turns the LED on or off immediately when the button is pressed without needing to release the button first. I'm really glad I figured it out before watching this! I was close to giving up.

the line if(buttonOld==0 && buttonNew==1) made me so confused, I rewatch the video 3 times and started analyze the logic of the code, since if(buttonOld==1 && buttonNew==0) made way more sense to me! What made it more confusing is the program works both ways. Then i studied with 100% concentration, serial printed all values to analyze if i missed something....BOOM! the code works both ways, however the trigger time is different! It has been so long I lost the joy of studying and figuring stuff by myself. Thanks Mr. McWhorter, your lesson is way too good to be free on internet.

Echoing the "great job" on this lesson. I had solved this on my own, but my solution was bit more complex. I detected the button press, then waited for the button release before toggling the LED. Your analysis and solution made me realize all I had to focus on is detecting when the button was released if it was already pressed.

It took me longer than I thought it would. I had to leave it alone for a while and come back to it. I remembered dealing with "lead edge" and "lag edge" signals when troubleshooting a different problem which led me to a similar solution, but as others have said, yours was more efficient. Awesome challenge! I was tempted to give up because it seemed like the solution should be so obvious. Glad I worked it out myself. Thanks for the great videos.

This one, took me more time than I am used to solving the assignments. But finally, with logic, I could achieve it. I AM A LEGEND AGAIN. Thank you, teacher, for bringing this type of enriching content

Completed the task. Prior programming novice level helps. Drank lots of HOT coffee with creamer and sweetener. Not to mention 23 years in the service as an electronic technician. I definitely need the refresher. Great job keep the tutorials coming.

Network admin and beginner tinkerer here. Found your tutorial Playlist when searching for teaching that wasn't filled with fluff. These videos are great. I could likely skip around and go ahead but I'm enjoying the fundamentals you teach on every component. Thank you. Looking forward to getting to display screens.

Hi Paul, this is a great tutorial. Thanks very much. About this problem, I have to admit that it was the first really challenging one for me. It took me one full day after many attempts trying to find out the logic behind and drawing several flow charts unsuccessfully . Finally came up with a solution directly in the programming window, kind of similar to yours. I introduced a variable that changes to 0 or to 1 in case the actual reading value is 0 or 1, by comparison to that variable (I guess like the previous state). So here is my coding (starting with A=1): buttonRead=digitalRead(buttonPin) if (buttonRead==A) { A=1;} else { A=0;} if (A==0){ digitalWrite (LEDPin,HIGH); } if (A==1){ digitalWrite (LEDPin,LOW); } delay(d);

Before diving into the lesson, I did attempt to do this on my own and had a few ideas that I either deemed not fitting for the criteria or wasn't sure how to execute. 1. Use a variable that counts each time the button is pressed and then use an if statement that says "if the button is pressed and the counter variable is 0 then make the counter variable one and turn the light on." And vice versa for when the button is pressed again. The problem with this one is while the button is pressed the counter variable will rapidly switch between on and off thus not effective. 2. The idea above but add a delay so that the program will only execute once and then wait a certain amount of time before being able to count again. This does not meet the design criteria, but is a way to toggle the switch. 3. Idea one as an if statement and then nest a for loop into it to prevent the program from rapidly changing the counter variable. But I have been told that it's a bad idea to nest loops when programming. I'm unsure as to why, but I want to, as you say several times, practice good programming structure. 4. Make the arduino count up each time the button is pressed and based on if the variable is even or odd (possibly determined via binary) then turn the light on or off. Unfortunately, I will admit defeat on this one, but will press on to see the solution. I have to be getting close right? lol.

Mr mcWhorter i just maid a robotic hand with a pushbutton and a servo just by watching your tutorials thankyou so much sir

I tried to think in different strategies to make a toggle switch, such as, if it was possible to count the number of pressing the button, then it was possible to switch between the even and odd numbers. However, at last I went through this excellent lecture and learned how to make toggle switch! Thank you!

I was not successful on my own. I had the basic logic but the "bounce" in the circuit kept making me think I was totally wrong. Adding in a delay was the key. Thanks for the great lesson. Very practical.

This is my code , I used a while loop inside if and multiple delays because pushbutton doesn't give out values smoothly as you also mentioned . //This is a toggle switch(pull down resistor) , if button is pressed once the led glows, if button is pressed again it turns off int pushbutton = 2; //input pin from pushbutton , input values are 0 or 1 int buttoninput; int led = 13; int dt = 500; //different delay needed so value doesn't turn quickly int dt1 = 250; void setup() { // put your setup code here, to run once: Serial.begin(9600); pinMode(pushbutton,INPUT); pinMode(led,OUTPUT); } void loop() { // put your main code here, to run repeatedly: delay(dt); buttoninput = digitalRead(pushbutton); Serial.println(buttoninput); if ( buttoninput == 1) //works if button is pressed { delay(dt); buttoninput = digitalRead(pushbutton); //taking value again because button is released while ( buttoninput == 0) //stay in loop as long as button is not pressed again { delay(dt1); buttoninput = digitalRead(pushbutton); digitalWrite(led,HIGH); } } digitalWrite(led,LOW); } I think yours works faster than mine but in mine we don't have to keep track a lot and works just fine :D

I didn't get it without you. The answer was harder than I thought! I did give it multiple tries before watching you. I got close using a while loop.

I did it! Used a while loop white the button is pressed, and changed a boolean inside the while loop with an if, else if statement!! Thank you so much for your lessons Sir!

I'm loving the videos so far! for anyone watching this in the future, there are actually a few ways to code this. The most efficient I've found, was to just use while-loop-waits, much like waiting for user input.

Didn't get this one going by myself. Knew I needed state variables but couldn't finish it. Thanks Paul for the clear instructions!

Thank you for your amazing tutorials, Paul. As for the toggle switch assignment, I managed to do it in another way before watching you. When the value read by digitalRead becomes 0, we enter a loop which keeps reading the value of digitalRead until it becomes 1 and when it becomes a 1, we toggle a boolean variable - which represents the state of the LED.

This lesson kinda reminded me of working with rotary encoders, comparing a previous condition/state to a new one in order to determine the direction of rotation (clockwise or counterclockwise). Thanks for another great one, Semper Fidelis!

Have been struggling to learn Arduino and am often left wandering what the presenter is saying. THANK YOU FOR SLOWING DOWN! Several key points regarding writing code that I have missed, suddenly became clear from watching you type them in real time rather than saying here's the code copy and paste it. I will be looking at more of your tutorials as I go.

I have to admit that this one completely kicked my butt. I completely overthought it.

Cannot believe it has taken me so long to start watching this series! Excellent tutorials, keep up the great work it is much appreciated.

I did it by using a do-while loop nested inside an if-statement, if the buttonVal = 0, then do (digitalWrite High) while buttonVal = 1, and after the while loop finishes (when buttonVal = 0 again, when we press again), a digitalWrite(LOW) command comes. I have a brief previous C++ programming knowledge. Anyways, i am extremely thankful for your wonderful videos!

Hi Paul, I battled for a good while with this one, then admitted defeat. I watched the video and apart from learning your method, I picked up the (bread crumb) tip and that helped me get my method to work. I used two "while loops" each, one for each "LEDState" and they each had an "if" statement in them. The "if" statements would switch the LED on or off, with the button press, and set the "LEDState" causing the program to exit the "while loop" and then enter the other one. Hope that makes sense. Thanks for another good lesson.

I can't believe it but I actually figured it out!!!!!!! Thanks to your teaching style I'm actually learning how this stuff really works and was able to make an educated guess. Its different than how you did it but it worked. void loop() { Serial.println(readVal); readVal=digitalRead(readPin); delay(23); if (readVal==0) { digitalWrite(led,LOW); Serial.println(readVal); readVal=digitalRead(readPin); delay(23); } if (readVal==0) { digitalWrite(led,HIGH); Serial.println(readVal); readVal=digitalRead(readPin); delay(23); } }

Paul, I'm retired and my wife says I look like you (you poor fellow)! I'm using your series to get back to speed after a break of a couple of years, and I find it hugely helpful. I wanted to tell you that I did solve this one but with a different approach that requires a bit more code but fewer variables. It takes as a given that the LED will go on, then off, then on, etc. I'll paste it below. Many thanks for making this series available. Best regards, Dave Borch int inpin=7; int outpin=4; int state; int delaytime=50; void setup() { pinMode(inpin,INPUT); pinMode(outpin,OUTPUT); } void loop() { state=digitalRead(inpin); while(state==1){ digitalWrite(outpin,LOW); state=digitalRead(inpin); delay(delaytime); } while(state==0){ digitalWrite(outpin,LOW); state=digitalRead(inpin); delay(delaytime); } while(state==1){ digitalWrite(outpin,HIGH); state=digitalRead(inpin); delay(delaytime); } while(state==0){ digitalWrite(outpin,HIGH); state=digitalRead(inpin); delay(delaytime); } }

yes I do the lessons and the home work. I have been working on your lessons now for 3 months. I don't watch them like a Net flicks series. I move on to the next lesson after I understand the current lesson I am on, I play with the program to get a better understanding how it works and how to better apply the program under different conditions.

Ahhhh, I was thinking of the need to use new and old state variables and I have used them but did not realize that you have to actually ,,manually,, change the LEDstate after the IF statement and then manually change it again after the else statement. So my LED switched on at the first push but that was it. I could no longer switch it OFF after that. I must have tried about a dozen different combinations and lots of ,, head scratches,,. Oh...what a bummer...:))) But you know what I'm absolutely hucked on your teaching style. You are a true native teacher. Thank you very much and please, please do not stop the series. It is....well... it goes without saying one of the best teachings I've ever encountered here on youtube. Once again, Thank You, Sir.

I was able to do it myself. But after I watched the first 2 mins of your video, I realise that only trigger the "toggle function" after one let go of the button is a better way to do it. So I rewrite my code again, and it took me an hour to make it work. But I did have fun doing it. I think I did it in a totally different way than yours. I've learned a lot here. Thanks for all the effort that you put into all these videos.

This one is a real step up in the coding, If i don't get it after a while I work through with Paul and then stop before boom to run the program myself and then train on the debugging which is just as important as the coding skill, after all we all make mistakes!

IT WORKED! THANKS A LOT SIR! // PULL DOWN RESISTOR int readPin = 2; int outPin = 3; int delayTime = 500; int signal = 0; void setup() { pinMode(readPin, INPUT); pinMode(outPin, OUTPUT); Serial.begin(9600); } void loop() { while (digitalRead(readPin) == 0) { digitalWrite(outPin, signal); } while (digitalRead(readPin) == 1) { digitalWrite(outPin, signal); } signal = !signal; digitalWrite(outPin, signal); delay(delayTime); }

int readpin = 4; int ledpin = 8; int v; int i = 1; void setup() { // put your setup code here, to run once: pinMode(readpin, INPUT); pinMode(ledpin, OUTPUT); Serial.begin(9600); } void loop() { // put your main code here, to run repeatedly: v = digitalRead(readpin); while (true) { if (v==0) { if (i % 2 != 0) { digitalWrite(ledpin, HIGH); } else { digitalWrite(ledpin, LOW); } i++; } v = digitalRead(readpin); Serial.println(v); delay(140); } } It was working but maybe it was not that efficient method. Thank you, Paul sir for this great lecture and I really appreciated it.

I could not do this on my own Mr. Mcwhorter. This was a great lesson and I fully understand what's going on. What a handy function. Very clever. Thank you sir.

This project was very difficult. Completed along with your explanation regarding the 2 variables and conditions associate with pushbutton and LED respectively. Thanks for your support.

Hey Paul, thanks so much for your series. your new patron here. Not even exams have kept me awake like your lessons or as excited for the next. i was able to do it using three 'while' loops within one 'if' loop. also, i am not sure if i missed it before but that 'else' command came out of the blue. good thing i went through the whole tutorial. that was a much more efficient way to do it, perhaps

Fantastic episode, thank you. We had to watch because we weren't able to figure out the delay due to the Button bouncing by ourselves. Thanks one more time.

I was not able to figure out myself before to watch the video, my approach was far away and I become crazy :). Honestly, I had to watch the video a few time to understand the approach and finally I got it. Thank you very much!

I used a similar principle from when we first learned strings (ask, wait, read), except I just used the while loop to wait while (digitalread(buttonRead) == 0) {}, so then when you let go, it equals 1 and breaks the loop, executing the next part of the code, which is a counter to keep track of how many times the user pressed the button: if 1 then the light came on, if 2 then the light turned off and reset the counter back to 0. Past me would have never got this, so I'm glad looking back that I'm improving. Notes really do help the concepts sink in. My first time around, the button would turn on the light right away and use a counter to disrupt the while loop if the button was held down. It used the separate counter mentioned before to turn the light on and off. By using the initial counter (which counts each iteration while the button is held down) I figured out that you can set up secondary features of the button by holding it down for a specified length of time in conjunction with delay()! Thanks for opening up this world of programming for us all, Paul! 😄 Here's what I wrote for a toggle switch: int readPin = 13; int greenPin = 8; int buttonRead; int dt = 50; int x; void setup() { // put your setup code here, to run once: pinMode(readPin, INPUT); pinMode(greenPin, OUTPUT); } void loop() { // put your main code here, to run repeatedly: buttonRead = digitalRead(readPin); if (buttonRead == 0) { while (buttonRead == 0) { buttonRead = digitalRead(readPin); } x += 1; if (x == 1) { digitalWrite(greenPin,HIGH); } if(x == 2) { digitalWrite(greenPin,LOW); x = 0; } } }

It's almost 2k24 and I'm still watching your tutorial. Regards from Poland :D

From an old (90 yrs,) C programmer used to working with limited memory, I did essentially the same algorithm, but used logical tests and saves 22 bytes. My first computer (1956) was an IBM with 8k of ferrite core. The air conditioning was bigger than the computer.

Hi Paul! I managed to do the task on my own and in another way. What I did different is that I did 2 digitalReads with a little delay in between ( buttonVal1=digitalRead(buttonPin) ; delay(20) ; buttonVal2=digitalRead(buttonPin) ). Then I pretty much did as you did, only that I used a digitalRead for the LEDstate as well (yellowVal in my code). Thanks for the lesson!