Arduino Ultrasonic Motion Sensor: Motion Sensor and LED project

No video

Arduino Ultrasonic Motion Sensor: Motion Sensor and LED project

Рет қаралды 33,379

Күн бұрын

I wanted to make a continuation to the first video, implementing the addition of a motion sensor. We combined LED lights with a motion sensor to make a cool distance detector. Make sure you like and subscribe so that you don't miss the next video where we might implement the buzzer or remote.

Пікірлер: 160

@Waiduino Жыл бұрын

const int echo=13; const int trig=12; int LED1=2; int LED2=3; int LED3=4; int LED4=5; int duration=0; int distance=0; void setup() { pinMode(trig,OUTPUT); pinMode(echo,INPUT); pinMode(LED1,OUTPUT); pinMode(LED2,OUTPUT); pinMode(LED3,OUTPUT); pinMode(LED4,OUTPUT); Serial.begin(9600); } void loop() { digitalWrite(trig,HIGH); delay(1000); digitalWrite(trig,LOW); digitalWrite(LED1,LOW); digitalWrite(LED2,LOW); digitalWrite(LED3,LOW); digitalWrite(LED4,LOW); duration=pulseIn(echo,HIGH); distance= (duration/2)/28.5; if (distance=10 && distance 20&& distance

@ericknova2989 10 ай бұрын

Buen día, se puede agregar un buzzer ¿'

@Waiduino 10 ай бұрын

@@ericknova2989 Hola, no hablo muy bien español. Sí, puedes agregar un buzzer. Puedo hacer un vídeo sobre eso si estás interesado.

@ericknova2989 10 ай бұрын

@@Waiduino Hola, si, seria interesante agregar un buzzer que se active con el código que creaste.

@Waiduino 10 ай бұрын

@@ericknova2989 Haré mi próximo video sobre cómo agregar un buzzer para este proyecto. Gracias por tu comentario.

@Waiduino 10 ай бұрын

@@ericknova2989 Se acaba de publicar un nuevo vídeo sobre el sensor y el buzzer. ¡Disfrutar! Gracias por tu comentario

@manjuyadav-ws4xd 8 ай бұрын

Yo the channel owner is legend for replying to all comments most KZfaqrs dont do that

@Waiduino 8 ай бұрын

Haha thanks so much! I try to reply to every comment since I’m thankful you guys watch my videos and because I mainly wanted to help other people create and learn about circuits. I always try to reply to comments so thanks for noticing!!

@layanshali8015 6 ай бұрын

Hello just wanted to say thanks, I tried this in my class, it was my first time using ultrasonic and it worked💗

@Waiduino 6 ай бұрын

Yea of course! Thanks so much for your kind words.

@turtleburglary1141 2 ай бұрын

Waiduino: *audio shift* Me: *tears ears off by accident*

@Waiduino 2 ай бұрын

🤣🤣 underrated comment 😆😆 Did you build the circuit successfully?

@turtleburglary1141 2 ай бұрын

@@Waiduino I think so 🥹🥹.. nooo

@industrialelectricalbd6900 27 күн бұрын

NICE PROJECT! THANKS A LOT SIR

@Waiduino 24 күн бұрын

No problem! Were you able to build it successfully?

@teerthkhiya7318 3 ай бұрын

Hello Thank you very much for this video I was hoping if you could please mention the name of the all components for this experiment

@Waiduino 3 ай бұрын

Sure I found these all in the Arduino uno kit. It uses ultrasonic sensor, 3 LED, and an arduino uno. Let me know of you need it more specific.

@lyndalekirk6883 4 ай бұрын

Very well explained thanks

@Waiduino 4 ай бұрын

Thank you so much! Were you able to make the circuit?

@Bianchi77 4 ай бұрын

Creative video, thank you :)

@Waiduino 4 ай бұрын

Thank you!! Did you build the project?

@vipulsingh1155 2 ай бұрын

what is the value of resistor for led

@Waiduino 2 ай бұрын

I believe it is 500 or 1k but whatever value you use is fine. The lower the value, the brighter the LED.

@GladiatorX-te6bx 4 ай бұрын

Yo. Can you tell me how to switch off two motors if the distance is less than 20 for example, and otherwise keep it on? Thanks

@Waiduino 4 ай бұрын

Sure which motors are you interested in? Like servo?

@arinaitwejoe19992 9 ай бұрын

Hello thanks very much , so i have an inquire how can i use an infrared sensor as a level sensor and also with like 2 indicator LED lights ???

@Waiduino 9 ай бұрын

Thank you so much for your comment! It is possible to use the infrared sensor as a level sensor however it would require much more instructions than I can show here. Would you like me to create a video to show how to create this project?

@paulcarsco6029 2 ай бұрын

I tried using the code but it didn't work because I need a value for the pulseln variable?

@Waiduino 2 ай бұрын

for this project, i don’t think pulseIn is a variable, it should be a library. That’s why it has the parameters (the things inside the brackets if u look at the code). Did you copy directly from the comment?

@Sabbir-ln3bx 4 ай бұрын

What was the resistance of the resistor you used? And how did you wire the leds, and the wires next to the led?

@Sabbir-ln3bx 4 ай бұрын

oh wait nvm i think i got it.

@Waiduino 4 ай бұрын

Sounds good thanks for commenting! Were you able to create the circuit?

@Sabbir-ln3bx 4 ай бұрын

@@Waiduino it works thanks.

@patrickventurini5407 21 күн бұрын

en principe pour limiter le courant on met ne résistance de 1k en série avec la LED , mais comme la carte arduino de délivre que très peux de courant , aucu rsique , une résitance d e 330 homssuffit

@ZaidQuihuis 3 ай бұрын

i love you man

@Waiduino 3 ай бұрын

LMAOO thanks for the support! Were you able to built it without any problems?

@Mg28mg 3 ай бұрын

Can we do this with uno and hc-sr04???

@Waiduino 3 ай бұрын

Yep! If I am not mistaken, I used the hc-sr04 in my video as well as the uno. Thanks for your comment!

@DannyYuson 4 ай бұрын

endless thanks

@Waiduino 4 ай бұрын

No problem! Glad you enjoyed and learned something. Did you have to make it for a school project?

@shlokjobanputra4103 21 күн бұрын

nice i tried

@Waiduino 21 күн бұрын

@@shlokjobanputra4103 Awesome!! Did it work properly?

@Sabbir-ln3bx 4 ай бұрын

How do you do it with all the leds on and when you put your hands closer to the leds they turn off one by one?

@Waiduino 4 ай бұрын

Hi so basically you would need to modify the code. I will do that for you right now if you would like. You just have to set the status to each LEF as on and then every second it detects a hand, it will turn off an LED by turning it off. Let me comment the code now

@Sabbir-ln3bx 4 ай бұрын

@@Waiduino ok

@Waiduino 4 ай бұрын

const int echo=13; const int trig=12; int LED1=2; int LED2=3; int LED3=4; int LED4=5; int duration=0; int distance=0; void setup() { pinMode(trig,OUTPUT); pinMode(echo,INPUT); pinMode(LED1,OUTPUT); pinMode(LED2,OUTPUT); pinMode(LED3,OUTPUT); pinMode(LED4,OUTPUT); Serial.begin(9600); } void loop() { digitalWrite(trig,HIGH); delay(1000); digitalWrite(trig,LOW); digitalWrite(LED1,HIGH); digitalWrite(LED2,HIGH); digitalWrite(LED3,HIGH); digitalWrite(LED4,HIGH); duration=pulseIn(echo,HIGH); distance= (duration/2)/28.5; if (distance=10 && distance 20&& distance

@Waiduino 4 ай бұрын

Does that work? Let me know

@Sabbir-ln3bx 4 ай бұрын

@@Waiduino it doesn't

@LZ1SSA Ай бұрын

Червен кабел за маса, защо? Сигурен начин да прецакаме нещо е работата под напрежение.

@zainraza7126 7 ай бұрын

hey their whenever i connect to 5V my arduino shuts off plz help ASAP thanks

@Waiduino 7 ай бұрын

Hi! I’ve had this issue in the past. Pay attention to where the 5v railing is and you might find the cause of the issue. Did you make sure all connections are correct?

@zainraza7126 7 ай бұрын

@@Waiduino im not sure if my breadboard is properly or if the video is inverted u are saying to plug in the Sensor closest to the negative side right? Sorry i have a project on this and im stressed

@Waiduino 7 ай бұрын

@@zainraza7126 If you are referring to the sensor, the white wire is plugged to the rightmost pin on the sensor (the sensor circles should be pointed to the right). Is that what you are referring to?

@AKarts-ef4hq 8 ай бұрын

const int echo=13; const int trig=12; int LED1=2; int LED2=3; int duration=0; int distance=0; void setup() { pinMode(trig,OUTPUT); pinMode(echo,INPUT); pinMode(LED1,OUTPUT); pinMode(LED2,OUTPUT); Serial.begin(9600); } void loop() { digitalWrite(trig,HIGH); delay(1000); digitalWrite(trig,LOW); digitalWrite(LED1,LOW); digitalWrite(LED2,LOW); duration=pulseIn(echo,HIGH); distance= (duration/2)/28.5; if (distance=10 && distance 20&& distance

@missma.eugeniamartinezgonz560 4 ай бұрын

Como puede tu código mandar la información a un celular, supongamos un lugar separado, como cuando separas tu lugar, prende el foco rojo y manda la información a una pantalla.

@Waiduino 3 ай бұрын

Hola! Gracias por tu comentario. ¿Quieres conectar el arduino a un teléfono?

@user-to6hm2wy8z 4 ай бұрын

What is the resister number you used bro?

@Waiduino 4 ай бұрын

I believed I used like 500 or 1k but feel free to use whatever you want. Lower resistance means brighter color so I normally like LEDS to shine more

@ili-sha 7 ай бұрын

how many ohms resistor did you use

@Waiduino 7 ай бұрын

Hi! It should be 330 ohms, I’m not entirely sure. The lower resistance, the brighter your LED is gonna be. Hope this helps!

@zeeshamt1695 3 ай бұрын

Can u tell me the number of the risistor and the wites

@Waiduino 3 ай бұрын

I used a 1k ohm resistor. The higher resistance, the less bright your LED will be. What is your question about the wires?

@jesussaquin6266 2 ай бұрын

at 6:12 idk if my wiring is right but my LED is not lighting up

@Waiduino 2 ай бұрын

Did you notice that one pin of the LED is longer than the other? Did you follow that part?

@jesussaquin6266 2 ай бұрын

@@Waiduino heal all good friend thank you :)

@Waiduino 2 ай бұрын

@@jesussaquin6266 Did my advice work? Glad everything works!!

@DanielMTB663 8 ай бұрын

Yo I am new to arduino so could you tell me what app you use to put the code into the thing

@Waiduino 8 ай бұрын

Yea for sure. I talked about this in my very first video but the compiler or IDE is something you have to download. Here is the link: www.arduino.cc/en/software Let me know if you have any other questions!!

@DanielMTB663 7 ай бұрын

@@Waiduino Thank you 😊

@Waiduino 7 ай бұрын

@@DanielMTB663 Yea of course! If you’re interested in other projects I would greatly appreciate it if you could check out some of my other videos since i’m really trying to grow my channel. Have you built any other projects?

@DanielMTB663 7 ай бұрын

@@Waiduino no this is my first project as I am trying to make an RC plane. I have subscribed to see more projects. (I am using the radar to ad to the plane)

@Waiduino 7 ай бұрын

@@DanielMTB663 Ohhhh that seems super interesting! Glad to see your working with the Arduino. Thank you for your support and if there’s any project ideas or assistance you need with the Arduino feel free to ask any questions!

@mvsaikartheek633 9 ай бұрын

hello how to give connections for led positive and negative and resistor?

@Waiduino 9 ай бұрын

You can find that all in the circuit diagram. The GND should connect to the railing which is connected to a resistor which connects to the negative side of the LED and the positive side connects to a pin on the Arduino designated in your code. You can find a walkthrough in my first ever video. Hope this helped!

@mvsaikartheek633 9 ай бұрын

@@Waiduino oh thank you

@Waiduino 9 ай бұрын

@@mvsaikartheek633 Sure no problem! Let me know if you have any other questions.

@mvsaikartheek633 9 ай бұрын

@@Waiduino okay 👍

@Curiousitypathofficial 9 ай бұрын

the led is not lighting up how matter I try

@Waiduino 9 ай бұрын

Hmm i can assist you personally. Have you used a resistor and followed the diagram exactly? What pin did you attach it to on the Arduino?

@Mertv123 3 ай бұрын

only one light blink you know why i pretty sure i put it together right

@Waiduino 3 ай бұрын

You copied the code exactly, right? What pins is each individual LED connected to. Make sure they are securely in.

@Mertv123 3 ай бұрын

@Waiduino yes I copied the code, but I think it is the wire, since it is kinda hard to follow since you don't show yourself connect the led but I will try again

@Waiduino 3 ай бұрын

@@Mertv123 Thank you for your feedback, I will try my best to improve that for my future videos. With the LED, do you know which wires to connect it to? Remember that the shorter part of the LED should touch the resistor and the other to the wire connecting to the pin on the Arduino.

@Mertv123 3 ай бұрын

@@Waiduino it works now thanks you so much

@Waiduino 3 ай бұрын

@@Mertv123 No problem!! I’m so happy that you were able to make it. Is it for a school project?

@projekter.original 5 ай бұрын

Step1: Disconect Power from Arduino

@Waiduino 5 ай бұрын

Oh I forgot to add that to my video 😅😅. Did you make the project?

@douglaskiptum Жыл бұрын

are you open to innovation project. ?

@Waiduino Жыл бұрын

Yea definitely! I have been working on a few but they take really long to finish them.

@Waiduino Жыл бұрын

Also don’t forget to check out my other videos with cool projects and different Arduino modules!

@naughtyboys2381 6 ай бұрын

It's a distance sensor ig

@Waiduino 5 ай бұрын

Yea you could think about it like that. Did you get a a chance to make it?

@naughtyboys2381 5 ай бұрын

@Waiduino yes long ago, btw . Motion sensing is different from distance sensing i think

@Waiduino 5 ай бұрын

@@naughtyboys2381 Thanks for pointing that out, your are correct. Thank you!

@user-ut6dr9pb7l 5 ай бұрын

It doesn't let me send an email here I don't know why

@Waiduino 5 ай бұрын

No give me your email address so I can send you an email

@user-ut6dr9pb7l 5 ай бұрын

@@Waiduino boqo lol boqo no space for email

@user-ut6dr9pb7l 5 ай бұрын

@@Waiduino I couldn't send the whole email since it didn't let me and no space and no numbers

@user-ut6dr9pb7l 5 ай бұрын

@@Waiduino Did you find it?

@user-xg3nn4jm3z 3 ай бұрын

hello, can i ask for the diagram? tysm

@Waiduino 3 ай бұрын

Sure do you have an email or form of communication I can send the diagram to? Is it too confusing to follow with the physical components?

@user-xg3nn4jm3z 3 ай бұрын

@@Waiduino I'm sorry, I am a 2nd year college taking electronics and this is one of my arduino projects. I am sorry if I am a slow learner, earlier I tried this and it works! Tysm for the vid.

@Waiduino 3 ай бұрын

@@user-xg3nn4jm3z Of course, no problem! I just want to know how I can improve my content for the future so that’s why I was wondering if it was too confusing. Next time I will be sure to add the diagram so that it is easier to follow along. Thank you for your comment and I hope you enjoyed the video! Are you interested in continuing to make projects with the Arduino?

@user-xg3nn4jm3z 3 ай бұрын

@@Waiduino yes I am continuing for school projects. But discovering an arduino is too early for me. Maybe in the future if I am confident enough on this one. Tysm

@Waiduino 3 ай бұрын

@@user-xg3nn4jm3z Are you sure you don’t want to continue Arduino? I felt the same way when I started and that’s the reason I started this channel, to help others. There are wiring diagrams and in depth explanations on my other videos. Have you seen them?

@fkj7761 10 ай бұрын

@Waiduino 10 ай бұрын

😂😂 Hi! Are you interested in Arduino

@kabirrobloxPakistan Ай бұрын

a total timewast

@Waiduino Ай бұрын

@@kabirrobloxPakistan hi I am so sorry you feel that way. Is there anything I can help with? I know it can be difficult to follow since this was one of my earlier videos but if you have any questions I can surely help!

@user-ut6dr9pb7l 5 ай бұрын

Awesome video bruh can you help pls? thanks!

@Waiduino 5 ай бұрын

I’m glad you enjoyed the video! I can help, what seems to be the issue?

@user-ut6dr9pb7l 5 ай бұрын

@@Waiduino Heyy thank you! Do you have discord account?

@user-ut6dr9pb7l 5 ай бұрын

@@Waiduino Were not allowed to use arduino uno or any similar though so it's kinda a bit hard to choose but I think it's a small project since were not going to use arduino uno or any similar etc We have this type of list and I don't know which to choose for beginners raspberry pi Thanks! User Interface Basic Basic Kit (at least 2 from LEDs, Button Switches, Buzzer) Basic Bluetooth API (e.g. Blue Dot API) Basic Speech Recognition Basic Speech Output Basic e-mail Alerts Basic RFID input Basic Push Notifications to mobile using API like Instapush or Twilio Advanced Flask Server (or WebIoT) providing Web interface Advanced GUI created using TkInter or Pygame or guizero or similar Advanced Machine Learning Advanced GPIO connected Character Pad Advanced GPIO connected Joystick Advanced 74HC595 & Bar Graph LED Advanced 74HC595 & 4-digit 7-Segment Display Advanced 74HC595 & LED Matrix 8x8 or bigger Advanced Output to an IoT broker such as Thingsboard Advanced 2x16 I2C based LCD Advanced Fingerprint scanner Sensors and Actuators Basic Pi-Camera or USB Webcam for taking photos Basic PIR Infrared Motion Sensor Basic Soil Moisture Sensor Basic Rain Fall sensor Basic Relays connected to equipment such as water-pump/lights/ locks/ valves Basic CPU/Case/Graphic card temperature sensor Basic Photoresistor & LED or RGB LED with ADC module Advanced Infrared Digital Obstacle Avoidance Sensor Advanced Potentiometer & ADC module with LEDs or RGB LED Advanced Attitude Sensor MPU6050 Advanced Hygrothermograph DHT11 sensor / Barometric Pressure Sensor Advanced Wind Direction & Speed sensors Advanced Ultrasonic Distance Sensors Advanced Motor with ADC control or PWM Advanced Servo Motor/s Advanced Pi-Camera or USB Webcam with Open-CV computer vision

@user-ut6dr9pb7l 5 ай бұрын

List at least 5 functionalities in total from Table 1 below (Minimum 2 of which must be advanced) for use in your project. Elements from both sections of the table (User Interface and Sensors and Actuators) must be included. Use of the same component is only allowed once, if the two components are complementary to each other and are going to be programmed separately. We need to choose atleast 5 things

@user-ut6dr9pb7l 5 ай бұрын

@@Waiduino My group and I already have chosen things can you help us pls?

@fkj7761 10 ай бұрын

Hi 7:57

@Waiduino 10 ай бұрын

Hi!!! Did you enjoy the video?

@user-ut6dr9pb7l 5 ай бұрын

boqo lol boqo no space for email

@Waiduino 5 ай бұрын

thanks! I’ll send an email when I get home

@ih8snow415 9 ай бұрын

use this code if ur buzzer sound like radioactive sound "#define trigPin 9 // Broche de déclenchement du capteur à ultrasons #define echoPin 10 // Broche d'écho du capteur à ultrasons #define ledPin 13 // Broche de la LED #define buzzerPin 11 // Broche du buzzer void setup() { pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); pinMode(ledPin, OUTPUT); pinMode(buzzerPin, OUTPUT); Serial.begin(9600); } void loop() { long duration, distance; // Envoi d'une impulsion de déclenchement au capteur à ultrasons digitalWrite(trigPin, LOW); delayMicroseconds(2); digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); // Lecture de la durée de l'impulsion d'écho duration = pulseIn(echoPin, HIGH); // Calcul de la distance en centimètres distance = (duration / 2) / 29.1; // Affichage de la distance dans le moniteur série Serial.print("Distance : "); Serial.print(distance); Serial.println(" cm"); // Vérification de la distance et activation de la LED et du buzzer if (distance < 20) { digitalWrite(ledPin, HIGH); // Allume la LED tone(buzzerPin, 1000); // Active le buzzer à 1 kHz } else { digitalWrite(ledPin, LOW); // Éteint la LED noTone(buzzerPin); // Désactive le buzzer } delay(100); // Attente pour éviter les fausses détections } "

@Waiduino 9 ай бұрын

Thank you so much! I appreciate your input!! Do you use the Arduino often?

@ih8snow415 9 ай бұрын

@@Waiduino yes sometimes

@Waiduino 9 ай бұрын

@@ih8snow415 Oh cool!! Are you new to Arduino and electronics?