Arduino Unboxing: Self-Balancing Robot Kit ELEGOO Tumbller

Рет қаралды 98,073

Күн бұрын

The Elegoo Tumbller balancing robot is an easy kit for Arduino beginners, and you can learn a lot studying and changing its code.
Elegoo Tumbller on Amazon USA: geni.us/cJMA
- 15% Discount Code: NSKEMTTT from 04/05/2021 to 04/20/2021 on Amazon USA only*
* When I made the video, I thought Elegoo would send discount codes for Amazon stores on more countries... I got quite sad to know that it would only be valid for the US store.
Elegoo Tumbller on more Amazon Stores:
- geni.us/W8aAS Amazon UK
- geni.us/UVsf0 Amazon Spain
More Arduino Robot Kits:
- geni.us/YqD8Pf Amazon Worldwide
Disclaimers:
- As an Amazon Associate I earn from qualifying purchases.
- Elegoo has sent me a Tumbller for review, I didn't purchase it.
- NOT a Sponsored Video (no money has changed hands)
- Independent Review
Official Elegoo Tumbller Assembly Video:
▶︎ • ELEGOO TUMBLLER: Instr...
You can support me on
Patreon: / geekdetour
Paypal Me: paypal.me/GeekDetour
Buy me a Coffee: buymeacoff.ee/GeekDetour
Chapters
0:00 Self Balancing Robot Kit
0:29 Magic of Balancing Vehicles
1:12 Full Disclosure: Not Sponsored, Sample Provided
1:34 Unboxing the Elegoo Tumbller
3:38 Assembly Time-lapse
5:34 Feels Solid
5:56 Turning the Robot On
6:24 Bluetooth App on the iPhone
6:31 Playing Outside
6:46 Installing the App on Old Phones
7:07 3 year old girl playing with the Tumbller
8:14 Educational Material from Elegoo
8:50 7 Lessons in PDF & Arduino Code
9:30 Compiling and Uploading
9:47 Quick look at the Full Code
10:26 Making Small Changes: Speed
11:05 Encoders and fixing curving
11:28 Ardu-Nerd Alert!
11:30 Bluetooth Module VS Serial (RX/TX conflicts)
12:23 Expansion PINs
12:40 D13: Built-in LED
13:02 NeoPixels on digital pin D3
13:26 PWM on D11 removing Ultrasonic Sensor
13:52 I2C connectivity
14:49 Expanding is a challenge
14:57 Conclusion
15:04 Promotional Code
15:21 Write your questions!
#Elegoo #BalancingRobot #Arduino
-----
Written, Performed and Produced by Everson Siqueira
Music Licensed from Epidemic Sound
Nobody Else
Swif7
▶︎ • Swif7 - Nobody Else
www.epidemicsound.com/track/b...
Make Me Run
Vanity Street
▶︎ • Make Me Run
www.epidemicsound.com/track/q...
Cat on the Loose
Tiki Tiki
▶︎ • Cat on the Loose
www.epidemicsound.com/track/7...
Fall into Place (Instrumental Version)
Daxten, Wai
▶︎ • Daxten, Wai - Fall int...
www.epidemicsound.com/track/5...
Sparkles
Daxten
▶︎ • Daxten - Sparkles
www.epidemicsound.com/track/t...
Walking the Tiger
Stationary Sign
▶︎ • Walking the Tiger
www.epidemicsound.com/track/I...
So Curious (Instrumental Version)
Daxten, Wai
▶︎ • Daxten, Wai - So Curio...
www.epidemicsound.com/track/l...
Starstruck by Luck
Stationary Sign
▶︎ • Starstruck by Luck
www.epidemicsound.com/track/R...
A Journalist's Dream
Out To The World
▶︎ • Out To The World - A J...
www.epidemicsound.com/track/3...
About to Explode (Instrumental Version)
Daxten, Wai
▶︎ • Wai, Daxten - About to...
www.epidemicsound.com/track/f...
Video Snippets:
CAN YOU RIDE A UNICYCLE?! I CAN
Mr. David Wise
▶︎ • CAN YOU RIDE A UNICYCL...
Creative Commons Attribution license (reuse allowed)
Segway intro on Good Morning America Dec 3, 2001
Pittsburgh Andy
▶︎ • Segway intro on Good M...
-----
Cool Videos I recommend:
Segway's wild and bumpy history, explained
CNN Business
▶︎ • Segway's wild and bump...

Пікірлер: 180

@GeekDetour 3 жыл бұрын

Elegoo Tumbller Self-Balancing Robot Kit: - geni.us/cJMA Amazon USA - 15% Discount Code: NSKEMTTT From 04/05/2021 to 04/20/2021 on Amazon USA only* * When I made the video, I thought Elegoo would send discount codes for Amazon stores on more countries... I got quite sad to know that it would only be valid for the US store. Elegoo Tumbller on more Amazon Stores: - geni.us/W8aAS Amazon UK - geni.us/UVsf0 Amazon Spain Arduino Robot Kits: - geni.us/YqD8Pf Amazon Worldwide Disclaimers: - As an Amazon Associate I earn from qualifying purchases. - Elegoo has sent me a Tumbller for review, I didn't purchase it. - NOT a Sponsored Video (no money has changed hands) - Independent Review Support me on Patreon: www.patreon.com/GeekDetour Paypal Me: paypal.me/GeekDetour Buy me a Coffee: buymeacoff.ee/GeekDetour

@hazemk7855 2 жыл бұрын

Pls is there a new video soon I'm waiting on a fire🔥

@mq-r3apz291 2 жыл бұрын

I can't open folder even when extracted says "path too far" help?

@pabloricaurte2262 3 жыл бұрын

I love all the effort you put in your videos, keep going! You deserve millions of subs

@GeekDetour 3 жыл бұрын

Hey, thank you! 😃 Well, I try to make a video I would enjoy watching 😁 Million Subs? Wow, that would be something 🤯

@Dsschuh 2 жыл бұрын

I like your child-like curiosity and excitement! It makes your videos lots of fun. And your daughter is so cute and it is great that you are introducing her to electronics and science at such a young age.

@GeekDetour 2 жыл бұрын

Thank you Duane! 🤗 Your kind words made my day 😄 I don’t know if you watched my most recent video - you might enjoy it: kzfaq.info/get/bejne/mpt4gcRpydLHlKs.html

@SoCalRobots Жыл бұрын

I love it when companies give you cool stuff to review! I love reviewing too and I also have this kit. Lots of code to review and learn from!

@GeekDetour 11 ай бұрын

I already got things that looked awesome “on paper”, but were still very crude in development, to the point of so much frustration I abandoned the review and never published. But that’s the exception… Usually it is quite cool 😎

@azysgaming8410 2 жыл бұрын

bruh your stuff is legit high quality. you deserve millions of subs, no cap.

@GeekDetour 2 жыл бұрын

Wow! Thank you so much! Means a lot to me 🥰

@ryantprawira 2 жыл бұрын

nice video, great mods right there, and the most, your cute and adorable kids.. love that smile and laugh 😁

@shibidoobwahaha6280 3 жыл бұрын

Your underrated, I wish you more subs and views🙂. Your videos helped me learn a lot, even though I only started checking your videos and your channel 1 hour ago

@GeekDetour 3 жыл бұрын

Thank you so much! I appreciate that!

@duller9430 2 жыл бұрын

Ur tutorials and reviews are really great thank you for always going above and beyond helping us all understand arduino tech

@GeekDetour 2 жыл бұрын

Wow, thank you! You just made my day!

@espenbgh2540 Жыл бұрын

Man, never seen anything like that before, - your a real speed-assembler.

@DavidGarcia-sv4fn 3 жыл бұрын

Bienvenido de vuelta, maestro geek!

@GeekDetour 3 жыл бұрын

Ja ja ja, gracias David!

@barbezph 3 жыл бұрын

you so crazy, still loving your videos; easy to follow!

@GeekDetour 3 жыл бұрын

Thank you so much! 😁 So happy you found it easy to watch 🤗 I wanted to touch some advanced topics and it gets a bit harsh.

@Bronxbombers161 3 жыл бұрын

Good to see you again!!! I missed your videos my man!!!

@GeekDetour 3 жыл бұрын

Thank you Billy! Every time I say to myself: “next video will be faster”... and, ha ha ha, it takes even longer 🤣 I is good to push “Publish” again.

@Bronxbombers161 3 жыл бұрын

@@GeekDetour Seriously.... very few folks on this site have that true pride and enthusiastic approach!! Great videos my man and I tell you that consider helping others learn how to be creative like you.

@GeekDetour 3 жыл бұрын

Oh, Billy, that was very kind - thank you! 🤗

@vineilan 3 жыл бұрын

Welcome back!

@GeekDetour 3 жыл бұрын

Thank you! 😊 But I was not really "away", I was working A LOT on this video 🤯

@GeekDetour 2 жыл бұрын

You can support me on Patreon: www.patreon.com/GeekDetour Paypal Me: paypal.me/GeekDetour Buy me a Coffee: buymeacoff.ee/GeekDetour

@hazemk7855 2 жыл бұрын

You got new subscriber man I hope you get 10m subs I like your ideas and videos Keep going 👌👏🙄

@brunosuperman Жыл бұрын

I'm proud to see a Brazilian making such amazing channel in English!

@GeekDetour Жыл бұрын

Hey! Thanks man! The size of the audience is much different! É nóis 🇧🇷

@CraftyEnelrad 2 жыл бұрын

¡Que Linda! Las expresiones de tu hija son las mejores. Gracias por los videos.

@GeekDetour 2 жыл бұрын

¡Muchas gracias! 🤗

@electrohardik8497 3 жыл бұрын

Wowwwwww finally a video

@GeekDetour 3 жыл бұрын

This one took a while to finish! Just editing took 2 weeks!

@Scruffyx56 Жыл бұрын

so much information. your review is great!

@GeekDetour Жыл бұрын

Thanks so much! ❤️🤗

@rosascreativeworks5403 2 жыл бұрын

Oh that's cool! Love LEGOs! 😍

@shirpie 3 жыл бұрын

The king has returned!!

@GeekDetour 3 жыл бұрын

Ha ha ha, thanks! I might be the King of my cubicle 🤣 dilbert.com/strip/1994-08-27

@bjoern.molinari 3 жыл бұрын

You made my day 😊👍. Very good video. Keep on going 😁 I also try to understand how it deals with the PID stuff and how it reads the sensor data. Maybe that robot can be pimp with some S.L.A.M. functionality 😊

@ConexSpot 3 жыл бұрын

Well done! Quality content.

@GeekDetour 2 жыл бұрын

Thank you very much! I just published a new Arduino Kits comparison, I think you might enjoy: kzfaq.info/get/bejne/Y9qcZKhntci7nJs.html

@videotronicmaker 3 жыл бұрын

This is the second video of yours I have watched today. I am an Elegoo customer and I appreciate the time you put into this review. Sharing this with your daughter was nice. I get it. Sharing this with our children just makes exploring Arduino so much better. Keep enjoying. Keep sharing. Keep making. Thx.

@GeekDetour 3 жыл бұрын

Hello 👋 Oh boy, thank you so much for such kind words! Made my day ❤️ I am working on a new Arduino Kits comparison video - stick around! 😄

@eschdaddy 3 жыл бұрын

Most adorable video… EVER!!!

@GeekDetour 3 жыл бұрын

Wow! Thank you! 😁 I must say “Adorable” wasn’t on my list of expected words for it 🤣

@eschdaddy 3 жыл бұрын

@@GeekDetour: Thank your daughter for that title.

@Cloud_Effect 4 ай бұрын

10/10 Content Bro

@GeekDetour 4 ай бұрын

Thank you so much! ❤️

@cristinaramos6172 2 жыл бұрын

Adorei o vídeo!!! Que robô lindo!!!! 👏👏👏👏

@GeekDetour 2 жыл бұрын

Eu adorei montar este robô - o lance que ele se equilibra em duas rodas pra mim é hipnótico 😁

@sahilkumarrao98 3 жыл бұрын

Woah, your daughter is a grown up now, last video she was a cute little baby❤️. Time flies, hope you and your family are doing great!

@GeekDetour 3 жыл бұрын

Sahil, that was sweet ❤️ Thank you! Absolutely! Oh man... kids grow so fast! We try to not expose her too much on social media - but this time I could not resist 😁 We are doing fine! You take care and be safe!

@sahilkumarrao98 3 жыл бұрын

@@GeekDetour thanks man! Great video btw❤️❤️

@mq-r3apz291 2 жыл бұрын

I can't open folder even when extracted says "path too far" help?

@Joulespersecond 2 жыл бұрын

Mine arrived today and I am loving it! I think I will try 3D printing some housing for the robot to make it look like Wall-E :D

@GeekDetour 2 жыл бұрын

That’s awesome! I also want to customize mine with some 3D printed parts - this kit should get a community around it, making nice improvements!

@brunosuperman Жыл бұрын

Great vídeo!

@GeekDetour Жыл бұрын

Thanks!!!! 🤗❤️ é nóis 🇧🇷

@lemerodrigo 3 жыл бұрын

I wish it was easy to buy it over here in Brazil! Amazing video my friend. Thanks for sharing!

@GeekDetour 3 жыл бұрын

Hey man! So nice to see you here! Thank you 😃 It is a shame how difficult (and expensive) it is to buy "Arduino" things in Brazil... I feel such a difference here in Spain: I might have ordered near 100 cheap items from AliExpress last year... all of them arrived by mail without problems. Things between 2 to 10 USD. I remember trying to get things from eBay in Brazil, it was always a bet.

@Prog2012 Жыл бұрын

Thank you for your effort. It is very informative Thanks...

@demej00 10 ай бұрын

I built my own with yellow geared unencoded motors and Arduino Uno. Very satisfying project.

@GeekDetour 10 ай бұрын

Arduino Cars are LOTS of fun! ❤️

@demej00 10 ай бұрын

I agree. Have been doing Arduino projects for years and they almost always work. Your robot has inspired me to get back at mine and update it with XYremote phone app controller. Maybe even buy a kit like this one and play with that.@@GeekDetour

@mcch1n 3 жыл бұрын

this is really cool

@GeekDetour 3 жыл бұрын

Hi there 👋 Yeah, it is cool! I still need to discover why there are so much more videos about Robot Cars than Balancing Robots.

@ajeethsuryash5123 Жыл бұрын

Both informative and cute video.

@GeekDetour Жыл бұрын

Thanks!!! ❤️

@Filippos_77 3 жыл бұрын

wow nice unboxing 👍🏻

@GeekDetour 3 жыл бұрын

Thank you 🤗

@viperone1000 2 жыл бұрын

Great video...subbed. Thanks

@GeekDetour 2 жыл бұрын

Thank you! 😄 Welcome to the channel!

@fbe2013 3 жыл бұрын

Thanks for video

@GeekDetour 3 жыл бұрын

Thank YOU for watching! I am suuuuper happy to finally publish this video 😃

@LuisRiconewworld 2 жыл бұрын

Magnífico, entretenido, guardo y volveré a ver, pido kit

@GeekDetour 2 жыл бұрын

Muy amable, Luis! Gracias por ver - los vídeos tardan un poco (bueno… mucho) pero los hago con mucha ilusión 😄

@LuisRiconewworld 2 жыл бұрын

@@GeekDetour Fue un placer, saludos

@edmondsjc 3 жыл бұрын

Have you played with tuning the PID for balancing? Mine seems to hunt / sway slightly when stationary to stay upright. I think it might be partly due to the (slight) motor gear backlash, but I haven't had a chance to dig in and see if that can be tuned out. Thanks for the great video. It's a fun little kit!

@GeekDetour 3 жыл бұрын

Thank you! No I did not: I would love to play with that using a real-time way to change them. Sure: it has backlash. Don’t know how much better it can be.

@davidcriollo2587 Жыл бұрын

i need help with the code can you explain what specifically modifications you did to the code that came with the kit. please

@jonathanp8494 3 жыл бұрын

1:35 i ordered a board game from amazon and the box was a size of a treehouse 😂

@balaw1980 Жыл бұрын

Love your video and the enthusiasm you express for this product. I bought and assembled it and am ready to try some expansion ideas. But I do not know which pins the IIC is connected to. Can you let me know?

@GeekDetour Жыл бұрын

Hi there Bruce! I2C uses +5V (red), Ground (black) , SDA and SCL (on the yellow row) You should see the pins identified by white silk screen on the board, along with the pins.

@tonysfun Ай бұрын

I have this exact model. The robot balance fine, but I can't make the Android phone app to work. It connects and that is it. Any suggestions? Also, I found some 6-7 years old software and APP for the phone on Github. But it doesn't work eighter. Thanks!

@CreativePradeep 3 жыл бұрын

Nice video

@GeekDetour 3 жыл бұрын

Thank you!!! 😁

@bumpedhishead636 6 ай бұрын

Seems like it needs a way to detect the edge of a drop-off, similar to how a Roomba can detect stairs. Maybe another ultrasonic sensor pointed at a downward angle? The logic would be the opposite of the forward facing sensor - it would need to detect the floor ahead, and if it did NOT detect the floor, then stop & turn.

@GeekDetour 6 ай бұрын

Looks like a delicious tweaking project!

@user-mz1uh4ju1n 2 ай бұрын

I can compile and upload the code but my robot doesn’t do anything now. pls help!!!

@OmaBix 7 ай бұрын

Hey Geek Detour do you have any ideas of how I can build a robot that solves the rubix cube using arduino?

@GeekDetour 7 ай бұрын

Ohhh… that’s a super duper complex project - from the mechanical stand point, computer vision and solving algorithm. But you can find many videos on KZfaq of people that built those machines - maybe you can find one that is not so difficult to make. It gets expensive and super complex when you try to do it fast. If speed is not a goal, I saw some simpler ones. Search and you will find. Good luck! 🍀👍

@OmaBix 7 ай бұрын

Thank you 🎉

@epremeaux 9 ай бұрын

Nice review! The issue with your I2C expansion plan is due to the fact that they must read the accelerometer fairly quickly, at accurate intervals. During that time, you cant use the bus for reading or writing to another device. So, the challenge will be to write code that "caches" up I2C messages, waits for the time BETWEEN Accelerometer readings, and dispatch a message. Basically a message que system for I2C which assigns priority to the Accelerometer. This may mean only writing portions of the display at once, rather than the whole screen. "Slow" GPIO with the PCF8575. The "quick and dirty" way would be to add these other I2C device code routines right after the Accelerometer read. Ideally, since they are using a 5ms sensor loop, you would want all of the additional I2C read/writes to be fast, to keep that whole process much less than 5ms total. It may seem difficult, but 5ms is quite a long time in "microcontroller time." It executes 80,000 instructions in 5ms. ;)

@epremeaux 9 ай бұрын

To clarify: you cant write code that just tries to access the I2C bus whenever. Likely you interrupted the attempt to read the accelerometer, or caused the reading to be delayed too long.

@GeekDetour 9 ай бұрын

Hi there! I absolutely loved your explanation and it totally makes sense - it occurred to me that I should have tried to use the display with I2C right on the same time interruption that reads the accelerometer as you said. I was trying it on the main loop and, I agree, everything you said could have contributed to my failure. Also, the encoders on the wheels are using hardware interrupts and the frequency is much higher than I imagined at first / I still need to better study the priorities around Arduino interruptions, and see which functions have their execution suspended… I smell that the encoders can also making the whole thing very tight - more than the 5ms accelerometer reading. Unfortunately, I never got time to revisit my little Robot friend and continue learning and tweaking its code. Thank you so much for your time and knowledge! I really appreciated your comments! ❤️

@Nasir-on2qq 3 жыл бұрын

Sir love you from India

@GeekDetour 3 жыл бұрын

Thanks! ❤️🤣 Good vides for you from Spain 🇪🇸

@itsaberry 2 жыл бұрын

I am planning to build a two legged robot about a meter high it will have a real gyroscope on the upper 3/4 part of it to balance it I need help on using the pu6050 to control the gyroscope to balance the robot as it walks Please advise Thanks

@GeekDetour 2 жыл бұрын

Hi Sam! There are super good videos about PID control and this accelerometer - you need a better source of knowledge than me, I am also learning about that.

@JR-je7ce 3 жыл бұрын

Hi I was just wondering if you could possibly expand on your light/switch box from 2 years ago I have been working on one myself for my son who has sensory issues (trying to keep him away from the plug socket switches which he's obsessed with) and I'm struggling on where to start. P.s I love your videos and energy

@GeekDetour 3 жыл бұрын

Thank you so much! I might revisit it at some point - but let’s see if I can get some help for you right now... Here, very extensive instructions for a simples box: kzfaq.info/get/bejne/ob50Z5hkqcqtd5s.html And the article on instructables with diagrams: www.instructables.com/Childs-Toy-Light-Switch-Box/

@JR-je7ce 3 жыл бұрын

@@GeekDetour omg thank you so much this should definitely do the trick I don't know how I didnt find it the only other one I found was in a Plexiglass case but it was buttons to change colours. You really are awesome 👍👍

@shorotchandraroy5012 2 жыл бұрын

I want to big make hoverboard .you give me idea

@raimond2305 3 жыл бұрын

Yes

@GeekDetour 3 жыл бұрын

Of course! 🤣

@michaelsimeone9929 Жыл бұрын

What kind of case do you use to store your components? @ 24 seconds

@GeekDetour Жыл бұрын

Hi Mike! 👋 I am still trying several different plastic cases to keep my Arduino boards and modules - but I don’t fell in love with any particular model. I bought what was available nearby my house just to keep my things a bit organized. I prefer transparent cases, I don’t like removable divisions, I pay particular attention to how the lid is connected to the case: I avoid cases that the lid is a single piece with the body, because the hinges eventually break.

@phutanyoutube6559 2 жыл бұрын

Good job bro, @

@GeekDetour 2 жыл бұрын

Thank YOU! 😄

@daanenmudalli8130 3 жыл бұрын

Hey! I have a request please! Where can i find a free arduino course to learn everything about it, specially the codes.

@GeekDetour 3 жыл бұрын

OMG! There are lots of comprehensive tutorials/courses... the best for you depends on the style of the presenter and if the level of depth matches your previous knowledge. Here is a short one: kzfaq.info/get/bejne/h7WPfc-rltfUdKs.html and here is basically a full course, very well detailed (to me it drags a bit, but it certainly feels like going through a course): kzfaq.info/sun/PLGs0VKk2DiYw-L-RibttcvK-WBZm8WLEP

@gianlucamolinari3490 2 жыл бұрын

Would it be possible to connect it to the humidity/temperature sensor and display the results on a lcd?

@GeekDetour 2 жыл бұрын

Hi there! This robot kit doesn’t seem to be the best choice to display the temperature and humidity - all the pins are basically used. There are much cheaper kits that allow you to do such project. The Grove Beginner Kit is one of them: kzfaq.info/get/bejne/Y9qcZKhntci7nJs.html And either the official Arduino Starter Kit or an Elegoo kit also can be used to do that: kzfaq.info/get/bejne/q-CiYM2jsbuXdYk.html

@bottond 4 ай бұрын

Can the robot’s software be outsourced? I mean it would be nice to run the outsourced software in a remote computing environment (e.g. edge computation node).

@bottond 4 ай бұрын

I'm most interested in running and controlling via Wi-Fi. Is it possible to add a Wi-Fi module to the robot?

@GeekDetour 4 ай бұрын

This Robot uses a Bluetooth module - and it is possible to make better control of it changing the code and using an Arduino to send the commands (or write your own App). You could go to the Support area in the Elegoo Website and download the code from there, and open it in the Arduino IDE to check it that’s something you can understand and tweak 👍

@javierr.v.5724 6 ай бұрын

Por que no hace el balance?

@GeekDetour 6 ай бұрын

Dices, ¿de estar hacia adelante y atrás igual una persona en un monociclo? En realidad lo está haciendo, pero de manera tan controlada y rápida que casi no se ve. Los motores están vibrando constantemente para ir contra la mas sutil inclinación.

@ankitjha6229 3 жыл бұрын

"It's a Bobot"❤️ - Baby Geek

@GeekDetour 3 жыл бұрын

Absolutely! When I was editing the video I replayed this part so many times to myself because it is so cute 🤣❤️ I loved “Baby Geek” 🤗

@user-mz1uh4ju1n Жыл бұрын

I tried to upload the Tumbller Code and the libraries but there were error Messages everywhere . Please help me !

@GeekDetour Жыл бұрын

You need to find an Arduino forum where you can post a screenshot of your error messages, so people can see them and help.

@user-mz1uh4ju1n 9 ай бұрын

Or can you send ur code pls🥺

@gihanilangakoon 3 жыл бұрын

Good to see this. So well explained. Just that Elegoo and Amazon its not available. Will keep checking...keep us updated please

@GeekDetour 3 жыл бұрын

Hi Gihan! Thank you! Oh, in which country are you looking?

@gihanilangakoon 3 жыл бұрын

Hi....checked the elegoo website where almost all products are not available. I buy from Amazon US ... also not available

@GeekDetour 3 жыл бұрын

Really? Out of stock also on Amazon US? This is terrible!!

@gihanilangakoon 3 жыл бұрын

@@GeekDetour It is! something seems going wrong at Elegoo? Could you make inquiries and let us know?

@GeekDetour 3 жыл бұрын

I suppose some kits are more popular than others and they have a bigger production... I searched for the Tumbller on Amazon Germany and they didn’t have it. Here in Spain I can find it. The “Smart Robot Car” is much easier to find.

@CodedGamer972 2 жыл бұрын

Hi, I am new to Arduino which elegoo kit would you recommend me?

@GeekDetour 2 жыл бұрын

Hi there! As a first Arduino Kit, you should not get a Car or Robot (because you will treat it more as a toy than as a Kit of experiments). Get the Elegoo Kit I show in this video: kzfaq.info/get/bejne/q-CiYM2jsbuXdYk.html

@issagrimah6997 2 жыл бұрын

Programm of Arduino please

@terenceprabhu9076 2 жыл бұрын

Good day sir I'm currently doing engineering and want to do this project can u please help me out with this

@tejasHasaan 3 жыл бұрын

Which programming language used in arduino to make it functional.

@GeekDetour 3 жыл бұрын

Hello there! By far the most popular way to program Arduinos is to use the “Arduino IDE” (recommended for your first steps into the Arduino world) and you write code in C++ The amount of examples and tutorials on the Web and KZfaq is amazing - you shouldn’t be frightened by the fact it is C++, even more because most Arduino projects are quite simple, to the point. If you are asking about “Functional Programming” in Arduino, there might be a few experimental language projects… it is not mainstream. If you are looking to program in high-level languages (like Python or JavaScript), there are a few options - but maybe the best thing is to use an ESP32 board (instead of the typical Arduino board).

@tejasHasaan 3 жыл бұрын

@@GeekDetour Thank you so much sir 😁💓

@ymamguldadov6258 2 жыл бұрын

This is great robot, want to make one, but can't find the Arduino code, can anyone help me with that!?

@GeekDetour 2 жыл бұрын

On the Elegoo Website you can find it under the downloads section (if you need more help than this, I must tell you, Arduino will be too hard for you).

@Mercurychick 2 жыл бұрын

I was on a website that said it was a toy for kids. Would you recommend for a 12 year old?

@GeekDetour 2 жыл бұрын

Yeah, 12 years can totally assemble and play with it. Not sure about programming/changing it (depends on the interest/previous experience in programming). If you are in doubt between this and an RC car, there are cheap RC cars that will be much more in the “action” side.

@Mercurychick 2 жыл бұрын

@@GeekDetour thank you so very much! Awesome channel!!

@almaztech 2 жыл бұрын

"Video is not sponsored" immediately procedes to give promo code

@GeekDetour 2 жыл бұрын

Oh come on! 😆 These are two separate things! A sponsored video means the brand is paying the creator to produce that content - and I didn't get a penny to make this video. And very often, when the video is sponsored, the brand requires the creator to submit for their reviewing and approval (after all, it is a paid piece). Only after green light the video is made public. So, you don't have a candid, clear opinion of the creator. So far, I NEVER submitted my videos for revision. I say what I want to say and, help me God, I want to continue doing that.

@almaztech 2 жыл бұрын

@@GeekDetour Yes, i know. It is only a joke, and I know that you wouldn't be so hypocrite, but I do know people that does it. Anyway, I enjoy your videos, and also I like your reviews. You do a good job.

@GeekDetour 2 жыл бұрын

❤️ Well, thank you! 😃 But don't forget to check my affiliate links* in the description and buy the Kit on Amazon 😎 * As an Amazon Associate I earn from qualifying purchases (Yeah, I need to explicitly inform that here 🤣)

@almaztech 2 жыл бұрын

@@GeekDetour sure i will!😄

@ledblack2474 Жыл бұрын

12:17 モーター電源(VM)OFFかつUSB接続時、Bluetooth TXD信号が無効化され、USB Serial TXDが生きるわけか、賢い

@FMROCKY 3 жыл бұрын

Can we program a nano arduino without usb

@GeekDetour 3 жыл бұрын

I am curious: why? Did something happened with the USB of your Arduino Nano? (if so, it might be simples just buying another Arduino Nano and just plug it on the socked of the Robot’s board. Or are you asking about something fancier, like, wireless upload?

@FMROCKY 3 жыл бұрын

I am not having a usb cable it was my cousins project when be brougth it I just broke it and took the arduino i am trying to letter showing led.

@manueldavidjeronimopaez1343 Ай бұрын

Can you give me the code and the educational material please, I need it

@GeekDetour Ай бұрын

It's on Elegoo download center: www.elegoo.com/pages/download Choose "STEM Kits", Robot Kits, then Tumbler.

@sulkifli5052 2 жыл бұрын

Use PID or no?

@GeekDetour 2 жыл бұрын

It uses PID of course. But I didn’t play with them - the values came pretty much well tuned.

@adityak3578 3 жыл бұрын

Look at that grown up lil kid

@GeekDetour 3 жыл бұрын

They grow so fast! 🥲

@kennykd97 Жыл бұрын

If this video doesn't make you smile there is something wrong with you.

@GeekDetour Жыл бұрын

Oh, that’s so sweet 🥹 Thanks! Maybe you will like this one too: kzfaq.info/get/bejne/Y9OFdq-bqqqXl4k.html

@petergriffin513 2 жыл бұрын

Your daughter is cute.

@GeekDetour 2 жыл бұрын

Thanks! 🥰 She has A LOT of “personality”, let’s put it this way 😬🤣

@adityasingh6981 2 жыл бұрын

lets make drone with elegoo

@GeekDetour 2 жыл бұрын

That would be fun, right? 😆

@phuphu4523 Жыл бұрын

Can you make a arduino course for beginners?

@GeekDetour Жыл бұрын

I though about it a few times 😄🤔

@phuphu4523 Жыл бұрын

@@GeekDetour i hope see it hurry because i have a arduino but i don't know how to use it. I love your channel, it very fun, relaxing and knowledgeable, you are also very enthusiastic. 1 love for you. Thank you. Hope your channel grows bigger and bigger

@GeekDetour Жыл бұрын

Oh! Thanks! You are very kind. Hey, this is not a course, but I personally love this channel, hope it help you: kzfaq.info/sun/PLWNDWPAClRVoIZzsX-SkR5Br0_ZtRscxZ

@phuphu4523 Жыл бұрын

@@GeekDetour Oh, thanks, I'll check it out while I wait for you. Have a nice day! 😆😇

@ksmyaxe3408 Жыл бұрын

Airsoft gon be crazy

@saigokul5873 3 жыл бұрын

We dont want to code it

@GeekDetour 3 жыл бұрын

So, don’t code it! 😆 An RC-Car is even better! 🏎

@mcch1n 3 жыл бұрын

Glad to know you still don’t use an iPhone 5

@GeekDetour 3 жыл бұрын

Ha ha ha, yeah! I am using an iPhone 8 Plus with 256GB - it is still PERFECT to me: awesome camera, 4k videos, everything very snappy. BUT, I kept my previous iPhones: iPhone 5, iPhone 4S, iPhone 3G 😜

@mcch1n 3 жыл бұрын

@@GeekDetour that's a lot of phones :)

@t9yt Жыл бұрын

Nice !. Could you please share the Arduino Code for Tumbler?. Actually, the link on the elegoo site no longer works, so I couldn't download the source code.