30 Minutes Arduino course kzfaq.info/get/bejne/g8iSZduSlr3HgoE.html learn the most important stuff on Arduino so you can keep going.

one of the best tutorials on the internet!!! i was having issues with my Arduino mega, which are now resolved... surely credit goes to you!!! thanks a lot sir

OHHHH THANKS A LOTTT MY FRIENDD. THE FIRST STEP REAAAALLLYYY WORK FOR MEE :DDDD

5 yrs later and it's still saving people headaches, namely me. Thanks for the driver ya think Arduino would at least try to fix that by now.

after hours of worrying with installing the driver for Arduino UNO in Windows 10, I finally found your solution - driver CH341 !!! you saved me, thank you very much !!! I subscribed immediately.

THANK YOU THANK YOU A LOT MY FRIEND :)!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Love you sir ...it's working😍😍😍😍😍😍😍

This solved it for me! Thank you SO much! I can't believe there wasn't a solution from Arduino, or the board maker, or my Mobo maker - YOU ROCK!!

You are the man. I'm a follower from now on. I looked everywhere, you were the only person with the answer to the problem.

thank u very much love ya your my hero

I was trying to install CH340 drivers for my Arduino Mega 2650 on my old Windows 7 machine. When installing, the CH341SER drivers that are normally recommended did not install properly and the ports option in the Arduino IDE was greyed out. devmgmt.msc listed the Arduino as an unknown device and provided absolutely no driver support for it. Just to get these CH341SER drivers installed I had to use the "pnputil -i -a CH341SER.INF" in the CMD terminal and then selected what I installed from a list of available drivers in devmgmt.msc window. While devmgmt.msc now somewhat recognized the Arduino, I could tell that the drivers still were not properly installed and the ports selector in the Arduino's IDE Tool's drop-down was still greyed out. Furthermore, in devmgmt.msc I got a "this device cannot start (code 10)" in regards to the "Ports & Comm" entry for the Arduino as well as a "arduino board at COM3 is not available" error message if I tried to barrel ahead and access the Arduino in the IDE. The solution that ultimately worked was to do an internet search for a driver called "Arduino.INF". I think that these might older drivers from the Vista era but for some reason they worked perfectly on Windows 7. You should be able to find these drivers with an internet search but contact me if you cannot reply to this and I can help you. To install I again used the "pnputil -i -a Arduino.INF" command in the CMD terminal and instantly the drivers became associated with the Arduino and the ports option appeared in the IDE. The Arduino is now completely recognized on my machine. I just wanted this with you in the hopes of saving you the suffering that I had to go through in arriving at this solution.

I was biting my nails.....was in fear...thought that it won't work....but actually it worked....feeling relaxed ryt now....love ya bro.....😁😁

Robojax bro I can't see option other devices like u in my device manager but I found the update the driver option from under Action bar in device manager and pasted the drivers link from Arduino to update drivers and clicked next then it is showing best drivers for your device are already installed but when I open Arduino I am unable to find COM4 in tools option so can u tell me what's the problem?

WOW you are AWESOME!! I spend lots of time for looking for drivers and finally you showed me! THANKS!!

thank you!! i kinda panicked when the first way was unsuccessful because i have tried so many things and they have all failed but this worked great!!

thanks man ...new to arduino.... your instructions are quite thorough and it solved my win10 usb/com port issue.... trusting there won't be hidden critters krept in with the driver

MAN,LOVE YOU I WATCHED MANY VIDEOS IT DOSENT EVEN WORK I JUST GOT COM4 WITH THAT FIRST TRY :) LOVE YOU

you are a savior sir...im so happy that i can work further on my college project for this..also the money is not gone in wast

Muito obrigado, procurei pelo youtube inteiro, baixei diversos drivers, mas só o teu funcionou, salvou minha vida cara, thank you very much

it is the best video for beginners, especially for those who is facing problems in connection.

Thank you very much.I did not found anything good for this problem but this video is a miracle.

Thank you !!! It solved my problem !!! For those who are unpatient, can start from 3.51 where the real problem and solution start

Thank you Thank you I was having all kinds of problems downloading files. Following your instruction I was able to do, in 15 minutes, what i could not do in the last two days

For the latest version. 2020 do i hv to put a driver in it. I have arduino uno

Many many thanks, I was having same driver issues in Windows 7... Can you help me fix the driver issue when NodeMCU is used?

Thanks a lot, sir. I was only able to complete my project because of you. Greetings from India !!!

dear robojax i have the older arduino with (AT mega 328) ship it suddenly stopped working giving me the code52 in the driver

Hi! Is it possible to modify an arduino library to use PIC?

Great tutorial, helped me fix my Arduino driver issue. Thank you!!

I just wanted to say thank you.. your Arduino uno Driver saved me.. Thanks!

Fine. Thank you. before to meet you I spent two hours to try install drivers. Thank you again

How about arduino mega 2560 for windows 10? I also face same problem here but nothing i can download there. Can you help me?

Got stuck with my arduino board until I watched your video, thanks a lot!!

hey i couldnt find the driver in download section did you removed it?

First video I've come across with a working solution at a good speed

Thank you so much. I was yanking what little hair I have until I found this video. You are the best. Thank you again.

Hello, this sketch is normal for me to download, but others write me a mistake when translating it to the uno plate. Why?

I visited as well your website, all arranged perfectly and helpful, I'm trying to connect my Arduino to my x- plane 11 simulator to read the gauges data on little 2x6, and 4x20 little LCD by uploading data per UDP , most likely I will use your website more often. Again thanks very much for helping us out. Regards

thank you! I thought that I bought a defective arduino, now I can use it. more power to you sir.

I reaaaaalllllyyy couldn't find the proper words to thank you 😄 You Saved Me 🙏🙏🙏

Great Video- lots of support, unable to say enough good things about this company. Thanks again

sir , No such port appear in other device of Device manger when i plugged in the arduino to my pc , please help me

Finally!!!!!!! after 1 Day searching... its alive!!! Thanks

no I tried 3 different cables but every time I connected my uno, I doesn't show on the ports in the arduino application

Found this video after 2 days of buying my Arduino and searching videos This is working I installed👌👏👍

I cannot find the "arduino driver for windows" at RoboJax.com. Please help!

Thank you so much sir, I watched the video right before I want to give up but now my Atmega 2560 can be detected thank you so much

Can you do a video showing how to use 6 potentiometers on the Uno. I have tried BigJoystick but only 4 axes work.

i was about to send back all those 20 boards, thanks a lot my friend

When I plug in my new arduino clone in the computer it shows "usb device not recognized", and in device manager it is visible under 'universal serial bus controller' as 'Unknown USB Device(Device Descriptor Request Failed)'. Plz help me troubleshoot this.

I installed CH341 and manually updated the driver to that folder. Still doesn't work. Not recognized Code 10

this is the best video I have ever found , god bless you. You solved the problem which was eating my head from months , thanks a lot . RoboJax is legend

Thanks a lot sir !!! This has helped me to upload my first ever program for which likes to your channel isn't enough and I don't have words other than thanks.

Thank you so so much! Have been struggling all day to find a solution to this!

MUCHAS GRACIAS, SE HIZO LA PRUEBA Y SE OBTIENEN LOS RESULTADOS ESPERADOS, SALUDOS DESDE FRONTERAS, SONORA, MÉXICO.

Not working for 16U2 boards, it is only for CH340 boards!

Sir I have arduino uno r3 and my pc reads it as mega2560 what can i do? pls help

Can I ask a question? I think our Arduino is not compatible using other ports, it only works in COM 10 port but the problem is we can't find it in our laptops. Do you think we can find the port COM 10 based on the version of our laptops?

Thank you very much sir, you are great. I have face to some time that USB drive I have not installed frome me , so are teaching to me in very simple method in your video. Thanks sir.

Thank you so much.. Finally it works with my computer port.. GOD BLESS!

hello bro the driver not installing my system is 32 bit but it cannot work the robojax is not working for me please reply for me

you are the best, I was trying to do it for weeks and its finally works, keep the good work men. MY HERO :)

Thank you a lot , I was spend a lot of time for fix this problem

All was going well right up to 5:15 (paste CH341SER) then it doesn't install. I get a message "Windows was unable to install your device" "Windows could not find driver software for your device".

Robojax I have problem in my Arduino my Arduino board is been connected but telling no plugin connection

This did *something* but it didn't fix the issue with my mEDBG CDC driver. It managed to get the Arduino flashing in GRB fashion, which it wasn't doing before. But it doesn't fix the port issue in the IDE.

i have arduino mega 2560 USB device not recognized in device manger unknown driver is missing please help sir

you helped me after 3 days of not know what to do

The driver is installed after doing this process but the port is not creating..what to do pls tell me

great video my man! thank you for heling me with my studies :)

when I pluging the arduino, and I open the device manager that didn't show 'port . . .' or 'unknow device' either, if 'unknow device' show up I can easyly update the driver, but there's nothing, how can I fix that problem? please sir fix this problem. I use windows 10. please sir fix this problem...............!

hello I need your help to be able to transform this arduino into a joystick. please i need you to guide me

Successfully installed drivers. Thank you so much

the first time I connect the cable of Arduino its work, it seems that it does not appear the yellow sign. shall I do all these instructions? please respond as soon as possible.

Thank you Very much man!! Watching this from Brazil, and now I can use my arduino!!! Great video, success, bro!

This is my 4th time watching this video ... Always helps me to find and install driver for my little duinos :P .. Thanks ROBOJAXXXX

Still working in 2020. Robojax has done a better job then Microsoft. Thanks a lot.

through this way i able to install drivers.. but still there is a "!'"sign in my device manager before serial port com6.and i cant able to upload any code through aurdino software.... beacuse i cant able to select the port option.... so what can i do i am using windows 10....

thankyou boss now i know why my sketch dont upload im subscribing you you are my hero boss it actully worked!!!!

thank you works awesome I tried it on my windows vista 32bit system

This was a thorough tutorial. Thanks a lot. However one thing is not clear: if it works the first time( from arduino drivers folder) do we still have to install the driver from robojax. Thanks

THANKS A LOT. YOU SOLVE MY HEADACHE PROBLEM , ON THAT DRIVER. YOUR THE MAN!!

Will it work with cp 210x sili labs?

Sir I wànt audrino program for my project my project title is automated rain grass cutter machine

i had a problem.....when I upload the sketch,it tells me that the port is busy....how do i fix this?...please help..

thank you so much for this movie, i am so glad of you

I would like to apologize to everyone for getting frustrated getting my Arduino boards working. ROBOJAX stayed with me right to the end with resolving the problem. I tried using a second new cable and the Arduino still did not work. ROBOJAX stayed with me so I tried a third cable and HELLO -- the ports showed up. I followed ROBOJAX wonderful instructions and now everything works fine. I tried following instructions from 11 different sources and ROBOJAX was the only one that solved the problem. MANY THANKS I will definitely be buying any future purchases from their store- Please check them out.

Thank You! This driver tipp is very good!! The UNO driver why not downloadbar from Arduino website ??

Worked great for mBot mCore with Windows 7. Thanks

Thank you ! This is working ! Great tutorial ! You saved me a lot of time !

My board isn't showing up in the device manager, I've tried two cables and two computers--please help!!!!!!!

Thank you for your great video, my win10 laptop worked fine but i have been struggling with this all day to get this on my win7 pc. Thanks again thumbs up for this video

Great. It works now. Thanks. On my system it is COM7

Sir on my PC, it isn't working. My PC is only Showing two drivers( Unknown Device and PCI Device) Help Me PLzz

Thanks Alot ! You Helped Me Out So Much With My Project !

c:\program files\arduino\hardware\tools\avr\bin\../lib/gcc/avr/4.9.2/../../../../avr/bin/ar.exe: unable to rename 'core\core.a'; reason: Permission denied sir i found such type of error what colud i do now can explain

thank you for this tuto but i always have the same problem with the yellow sign :/ I'm using vaio i5, at the begining i haven't also the port com i added it but the same problem

Thank You Bro for presenting an informative video

Thank you very much! Your advice solved my problem. :)

Hi sir I got this problem solved but I am not able to upload programs into the arduino nano chip. Would you give me some guidance in order to solve this issue