Are Hinderer Knives Worth the $$$??? (And Which Should You Buy First)

Рет қаралды 19,356

Күн бұрын

A lengthy discussion about the pros and cons of Hinderer knives as it relates to their value and some advice on which one to buy first and where to buy it.
www.usamadeblade.com
www.dlttrading.com
Check out Southern Edge Knifeworks at www.southernedgeknifeworks.com and use the code SDSEK at checkout for 15% off AND free shipping!
New masks in stock at www.lhbart.etsy.com
Check out www.sliceydaily.com on November 1st!!!
To Join the channel and kick in a few shekels for the knife-buying basket, click / @sliceydicey
Make sure to visit White Mountain Knives at www.whitemountainknives.com and get your discount by using the code SDWMK at checkout!
If you enjoy these videos and want to see more, please support us on Patreon at / sliceydicey Thanks in advance.
Go to Knifejoy NOW by clicking knifejoy.com?aff=37 and every dollar you spend will help support the channel!
Check me out on Instagram @sliceydicey75 and Facebook at / sliceydicey75
Email me at sliceydicey75@gmail.com
#sliceydicey #knifereview #edc
0:00 Intro
1:26 My Hinderer History
2:50 5 Reasons Why They ARE Worth It
18:21 5 Reasons Why They Are NOT Worth It
27:21 Which One Should You Buy?
30:28 Where Should I Buy One?

Пікірлер: 169

@iansharpe8420 3 жыл бұрын

Between you and metal complex we have enough hindererererererererer content for everyone's needs

@anthonymiller8979 3 жыл бұрын

A #14 Irwin spanner bit fits that pivot perfectly

@braydinq 3 жыл бұрын

I just bought my first one and binging all the videos on them and way cooler then i thought

@johnwaddell1915 2 жыл бұрын

Thank you for explaining, I'm looking to buy my first hinderer. You've helped me a lot.

@boss3251 3 жыл бұрын

Man you nailed this! great content.

@billgag1028 2 жыл бұрын

I’m just getting into Hinderer knives and I only own one so far and I wanted the thank you for both, this video and your service.

@theknifewhisperer5667 3 жыл бұрын

Great video Bryan! I'm hopefully getting a Bowie next week.

@blamedexter 3 жыл бұрын

I got (my dad got for my birthday) a Battle Black DLC with red scales and im so excited for it

@19Bearsfansince79 3 жыл бұрын

Yes sir, can't go wrong with red and black bro should throw some black hardware in there too haha 😜

@landscapingspecialist 2 жыл бұрын

Well i finally pulled the trigger on a hinderer xm-18. Orange g10, battle bronze. Working finish skinny harpoon spanto in cpm 20cv. Super stoked! Been looking for a while and found one for current retail price.

@Jrtowns1 3 жыл бұрын

Watching this while flipping my XM’s. I’d like to add a Eklipse and a black Bowie to my collection.

@BDSwaim 3 жыл бұрын

Im gonna get at least one for the collection. Now to decide between skinny skinner or usamadeblade exclusive half track I hear they have another coming up soon.

@dougputhoff3215 3 жыл бұрын

Great review

@yankee2yankee216 3 ай бұрын

My first Hinderer was an XM-18 3.0, which I thought was too small (I am warming to it). Awhile later I took a shine to a Jurassic, which I got with Magnacut slicer blade, which I love. Then, recently, I decided to try an Eklipse. I got one with the M390 swedged spearpoint blade, and I love it as much as the Jurassic! As a matter of fact, I now think Hinderers are my absolute favorite knives! I will be getting a new XM-18 3.5 as soon as I can swing it (and as soon as I can find the configuration I want, with a slicer or spearpoint blade, in Magnacut)…

@lilskeleton562 3 жыл бұрын

I have a hinderer compact dauntless. it's my favorite knife

@LIE4ME 3 жыл бұрын

06:40 Battle Bronze. That's a show stopper. As in pause KZfaq and Google Henderer Battle Bronze Warthog then go back to collect knives vicariously through Slicey Dicey!

@yankee2yankee216 Ай бұрын

The Chinese are also making tools to disassemble Hinderers. A set of 2 tools, which fit all the different screw-head types (except the Philips head) Hinderers use, at a cost of only about $10…

@JUSTIN-jo6jb 2 жыл бұрын

Holy cow!!! I finished the video and checked out USAMADEBLADE and sure as shit they had a Hinderer w g10 blue scales in stock. Score!!!

@esisolina 6 ай бұрын

Ive owned 3 Hinderer’s and they are definitely worth the money. I don’t own Hinderer anymore and never will because they aren’t available to buy, sick of going to the site with nothing available to buy. Happy to own Chris Reeve and other quality knives

@pines2000 2 жыл бұрын

Used to want a xm-18 years ago, I let it go for awhile. But I'm back to wanting one badly! A triway 3.5 or 3 even, slicer. Hopefully some will drop soon enough! Maybe I'll settle with the 0562ti for now! Thanks for the content!

@pete6705 Жыл бұрын

I don’t know about you, but I looked for about 6 months and never found one available. I finally just bought one on eBay that was about $100 over retail. It was more than I wanted to pay, but it’s the best knife I’ve ever owned, and now I don’t have to constantly search the whole internet for one anymore

@wayneclark1464 Жыл бұрын

I hope they are worth the money.l have bought 5 so far. I love them.

@petergalione1414 3 жыл бұрын

What I love about Hinderers is that they are meant to be used. They look good with wear.

@klaassiersma4892 3 жыл бұрын

I have got a xm 24 teflon washer one, i baught mine in the expensive first responders first era. Got it from a online place in Holland and when i got it it had a bit of a blemish ( the titanium side reeds Hind, not Hinderer) I decided to keep it, it was this or no Hinderer at all. But it made me a bit insecure in buyin more.

@pinoyedcknives 3 жыл бұрын

i have a large inkosi LH and an XM-18 3.5 G6 slicer.

@draggboy 10 ай бұрын

Man, back when I was in my knife collecting phase, you practically couldn't buy a hinderer. You had to go to a show like Blade, pay money to get into their lottery, and if they called your name you would get a chance to buy one. I drove 6 hours to a show to get one and got lucky to get my name called and got a green G10 with coyote brown custom finish on the blade and scale. It was one of the few knives I sold and the price I got paid for my trip and all of the other knives I bought there. Probably a 1 of 1 but I didn't like the 3". Now they're available for sale all over. Looking at some of the used prices of my knives, they've all gone up insanely in value. My Chris Reeve Umnumzaan first generation Wilson Combat edition is worth like 3 or 4 times what I paid. If only I still had my Sebenza Micarta wharncliffe.

@darrenzilisch6293 2 жыл бұрын

Bro, that green /wood handle Hinderer is freaking amazing, ive never seen a knife like that! Gratz on that ill be looking for 1 now.. my wallet hates you lol.

@Exist_Outdoors_ 3 жыл бұрын

Tremendous video

@sunnyrachelsson3169 3 жыл бұрын

I've handled some xm 18s and I have a zt0562 and I think I'm good with just the zt I got it for half the price and it feels just as good and the action feels even slightly better on the 0562. I also ended up getting a 0393 so I got those two for the same price as one xm18

@Templetons Ай бұрын

100%

@quicktoevil 5 ай бұрын

Is a thick G10 scale available that will eliminate the liner altogether? I know the stop pin bears on the liner so perhaps it is needed...

@yetisuncle666 Жыл бұрын

have you had any of these tested to see if the hardness actually meets the advertised hardness?

@pete6705 Жыл бұрын

I just got into Hinderers in 2022, and I think I must have picked the worst year to get one. I’ve been looking every day for months, and I’ve never seen one available anywhere than the secondary market. I’ve even called a couple of the big dealers and they say they generally sell out in less than 10 minutes. I finally just broke down and bought one on the secondary market for a pretty hefty price. I had to do it because I really wanted one, but I couldn’t keep trying to hunt one down for months and months

@TheModernNeanderthal 3 жыл бұрын

I really need to try other Hinderer knives other than the XM. I’ve tried over and over but the XM ergos just don’t work for me.

@peterpuleo2904 3 жыл бұрын

For flippers in general, do you prefer bearings or washers?

@SittingWolfParanormal420 Жыл бұрын

I have the wild boar hinderer knife that I received as a gift for my birthday years ago

@yankee2yankee216 Ай бұрын

“The thrill of the chase?” I won’t jump through hoops. By paying $100 more, on the secondary market, I can get almost any knife that was ever made… and retain at least a scrap of dignity! I pay less at least as often as I pay more, so it all comes out in the wash.

@Sleepy_spartan717 11 ай бұрын

I love the xm18 for the same reason I love the strider sng and smf.

@zackaryschmidt5161 3 жыл бұрын

What would be cool is if hinderer made an xm18 3.5 let me finish skinner non flipper with the swale of the skinner and a finger choil ergonomic masterpiece the ergonomics would be so improved better then they are now. There great now but that would be even better.

@bigsean2473 3 жыл бұрын

ltk had that sheepsfoot blade on his table sale for 299 last night he has a jurassic with the ti scale for sale for 499

@A_Sense_Of_Purpos3 11 ай бұрын

Bro i have 3 xm-18's. The original has never been apart for cleaning and the only thing thats been done to it maintenance wise is reprofiling the edge to about 20 instead of the 24ish that comes out of the box. It's like a decade old, never been cleaned or oiled. NEVER fails to deploy. These knives are eternal.

@abc456f 3 жыл бұрын

Would like an eklipse but where oh where are they? I have the zt 0393sw and love that knife. So comfortable in hand. The one knock I have with the xm-18 and even worse on the xm-24, is the design of the flipper tab. Works great as a finger guard but just awkward shape as a flipper.

@SliceyDicey 3 жыл бұрын

Yeah... The Eklipse is definitely a victim of "the chase" that I mentioned.

@pannan80 2 жыл бұрын

Impossible to find one unfortunately,secondary market is not open to me since people can't be bothered to ship to Sweden 🤨

@dustingaddis2423 3 жыл бұрын

Hey Slicey - I've always wondered, the split pivot - will a bicycle chainring bolt tool work? You'd have to grind off the center bit obviously. But definitely cheaper than the Hinderer tool.

@SliceyDicey 3 жыл бұрын

Yeah but at that point, chop a penny or buy a #14 Spanner bit. Chainring tools are much more expensive.

@mattb406 3 жыл бұрын

The Eklipse 3.0 is my favorite, and one I’d recommend to a first-time buyer.

@SliceyDicey 3 жыл бұрын

It's a good one but a pretty rare beast.

@19Bearsfansince79 3 жыл бұрын

I have mine in stone wash and harpoon tanto...love it!!!

@williammatthews2948 3 жыл бұрын

I was given a Hinderer several years ago that didn't come with a box or any documentation. My question is how can I determine if it's the real thing, or a cheap Chinese clone?

@metal_complex 3 жыл бұрын

This entire video was spot on 👏👏👏

@SliceyDicey 3 жыл бұрын

Thanks, mate!

@ahhcrickets 3 жыл бұрын

I would buy a 3.5” XM-18 fullered spear non flipper if they were available. One of the best looking hinderer’rs out there. **or rather the Metal Complex signature edition model

@april44 2 жыл бұрын

I’ve been ISO a Hinderer (and I’m open to choices) for over a year now. I’ve missed 2 DLT drops by approx 1-2 hours each and there were none to be had, not one! Not one of any color, shape or size! While I’m very glad that you have an “inside scoop” for some or all of everyone’s drops- most of us aren’t that lucky! Thanks anyway for a very informative video..

@rossginn1171 2 жыл бұрын

Can’t beat the Monkey Edge XM18 3.5” in 3V 🙌🏻

@torreyintahoe 2 жыл бұрын

My little brother has four custom hinderers. He's not a social media guy at all so I recently posted a photo of his collection on the Hinderer FB page. Holy shit, I had people messaging me, making me offers and it turns out one of his is one of two ever made so people were flipping out on that saying, we wondered what happened to the other one. LOL

@genoedcknifecollecter1538 3 жыл бұрын

Are hinderer and reate on the same level of quailty and maybe harsey?

@smallcaps 3 жыл бұрын

Viper makes a nice Hinderer.

@joeybaldarelli6620 3 ай бұрын

How's the lockout?

@alwaysforward28 Жыл бұрын

damnnnn flexing on us so hard with those hinderers, demko, harsey sheeesh

@Mike_Pedals 3 жыл бұрын

I currently have 2 3.5" XM-18s and would not hesitate to buy a Hinderer. They are great. Currently holding out on the rumor that they're working on a run of Firetacs

@SliceyDicey 3 жыл бұрын

I can pretty much confirm that they are, but there's no timeframe. I'd guess early next year since they're doing Jurassics again before the end of the year.

@19Bearsfansince79 3 жыл бұрын

@@SliceyDicey I'm loving the Jurassic news sir that's pretty awesome maybe I'll pick up Jurassic number 2 coming up 😊

@kratoids 3 жыл бұрын

looks like you were correct

@peterpuleo2904 3 жыл бұрын

Built for a life time, but a bit too clunky for me. Just my preference. Excellent review!

@Lakandula1234 2 жыл бұрын

I prefer light weight knives have you tried the 3 inch version of the XM-18 it's not as bulky

@verveblack 2 жыл бұрын

fave knife ever is the kershaw ember designed by rick hinderer. super great design & doesn't scare people in urban areas too

@SliceyDicey 2 жыл бұрын

I actually have one of those somewhere! Neat little thing.

@verveblack 2 жыл бұрын

@@SliceyDicey yep awesome screw & body colour, got a place to put your finger for controlled cuts, easy to open, deep carry clip (critical in some urban areas where people will call security on you), lightweight. have yet to find a knife that beats it. wish there was button lock version of this

@jshphysicistatyahoo 3 жыл бұрын

@Brian - You have XL hands by my guess. How can you stand using the XM-18 Skinny?? My hands wrap around the XM-18 standard and my finger tips jam into my palm. It's a feeling I hate, so I sent the knife back. Am I holding the knife wrong? I already have a Spanto XM-24 and now I want an XM-18 Fatty because the fit should be about the same as the XM-24. Please tell me your thoughts.

@SliceyDicey 3 жыл бұрын

Large hands, but pretty long fingers. Feels fine to me. Is the 24 more comfortable? Yes. But not enough to make it worth the extra bulk and decreased performance for EDC tasks. I recommended the 18 Skinny for a FIRST HINDERER. Not as your ONLY Hinderer. As Steven Wright said... "On the other hand... You have different fingers..."

@willtrax71 3 жыл бұрын

I think they are overpriced ZT knives but they are certainly nice Knives and I have a 562 and l love that. I EDC an Ultratech and a 940 but DAMN I love that P-51 Hinderer Scale..!!! Lol stay safe my Friend Semper Fidelis

@jad1019 3 жыл бұрын

The Battle Black Bowie you were looking at buying must have been pre triway.

@SliceyDicey 3 жыл бұрын

No. They're coming soon.

@havoso 3 жыл бұрын

The Jurassic looks like a upgraded cryo

@tanorkewl8360 Жыл бұрын

Would u sell your we gava

@staufferedc9057 3 жыл бұрын

Usa made blade said they should be getting some battle black bowie blade some time in the future.

@SliceyDicey 3 жыл бұрын

Yeah... May have to get me one of them. I heard this week. Hope not. Won't have the $$$

@staufferedc9057 3 жыл бұрын

@@SliceyDicey yeah same.. those are gonna be so sweet though. Just picked up my first Olamic this week and man is it nice. Might put funds towards another.. Ever try out their Whippersnapper?

@johnwest4492 3 жыл бұрын

Hey Brian, Hinderer has to Metal Complex who's at last count owned 27 different Hinderer knifes lol

@SliceyDicey 3 жыл бұрын

But I KEEP AND USE mine!!! ;)

@MrLuckeastwood 3 жыл бұрын

Shots fired lol

@johnwest4492 3 жыл бұрын

Hi Brian, foe me the ZT 0566 is still the one for me :))

@19Bearsfansince79 3 жыл бұрын

One thing's for sure if you handle a ZT and then you handle a Hinderer, anyone with any bit of intelligence will truly understand the price difference..

@msharmall7298 3 жыл бұрын

I bought ONE GEC knife and refuse to do it again because of "the chase".. That sort of thing also makes me want to just get a ZT 0393GLCF and some micarta scales for it instead of a Hinderer, but then I'm at like 350$ instead of 425$... Idk at that point I am tempted to just wait for an Eklipse to come back in stock. Any idea when that will be? I refuse to wait months

@msharmall7298 3 жыл бұрын

Pulled the trigger on the 0393, ordered some natural micarta scales from Sharp Dressed Knives too 👍

@BennyBladez- 3 жыл бұрын

I’m aiming for a Hinderer next! I want a full track though, even though they aren’t made anymore. If I can’t find one then I will go with the XM 18 but I definitely want a Hinderer thanks to you and MC. Gotta stack the chips for sure.

@19Bearsfansince79 3 жыл бұрын

If big knives are your thing and you can't find a full track check out the xm24 dude...

@davidshute9863 3 жыл бұрын

Is the blade stock the same between the normal and the skinny XM18s?

@SliceyDicey 3 жыл бұрын

No. I think it's 16mm on the normal and 14mm on the Skinny.

@rudycapote8256 3 жыл бұрын

Hey Slicey, awesome video. I got the XM18 non-flipper fullered spear from DLT. It was my first Hinderer and I love it. I know that they made the detent lighter on the non-flippers. The detent on mine seems too weak. Is that normal and does your non-flipper shake out easily? Thanks 👍

@SliceyDicey 3 жыл бұрын

Mine doesn't seem appreciably lighter than the flippers. Maybe A BIT, but not much.

@gpearce11 3 жыл бұрын

Much like CRK I think Hinderer knives are definitely worth it if you can afford it. Objectively, the XM-18 without flipper is my second favourite folding knife behind the Sebenza 31. I have one major subjective issue with it, however; it's not even slightly ambidextrous. Not only do they not offer a left handed version (unfortunate but honestly not unexpected), you can't even mount the pocket clip on the left hand side without spending $99 on a custom G10 scale cut for left-hand carry. Any lefty with knives can tell you it's fairly straightforward to use a right hand liner/frame lock left handed (especially if it's a flipper), but if you can't carry it in your left pocket there's basically no point.

@kdlusmc 3 жыл бұрын

I have a recently released 3.5in Gen 6 XM-18 non-flipper fullered spear in M390. It too is my favorite. It can be opened and closed left or right handed. I left it on bearings. I can't speak to how it performs on washers. Left hand closing is just a pull of the frame lock with the thumb and left hand opening is basically putting your thumb and forefinger on the fuller and pushing the blade out, and a slight wrist flip, or if you're good spydie flick the fuller.

@gpearce11 3 жыл бұрын

@@kdlusmc I'm fully aware it can be operated with the left hand. As I said in my original comment, all lefties have learned how to close a righthand frame lock (although personally once I start spending over $300 I'd rather not have to), and the flipper is the most ambidextrous opening system available, so deployment isn't a problem. My issue is that it can't be carried left handed without spending extra on a new scale to put the clip on the left side. If I'm spending $450+ I dont want to then have to spend another $100 just to make is usable to me. I can easily operate a knife designed entirely for right hand use, even if I have to spydie flick the right thumbstud, but if I can't actually carry it in my left pocket then I have no use for it.

@DG__3 3 жыл бұрын

@@kdlusmc What Geoffrey Pearce said. Nearly every left handed person on the planet can manipulate RHO tools, but for the most part it always feels like we're making the tool work vs working the tool. Bottom line: I'm not winging it with a hand tool not made for my hand to the tune is $450.

@alpine1600s 3 жыл бұрын

If you have to ask if a knife is worth its price point, you're not that invested. 🤔🤣

@rebellucy5610 3 жыл бұрын

Anyone know when the next batch of FullTracks will Drop?

@SliceyDicey 3 жыл бұрын

Pretty much discontinued for now. Rick said that if it comes back it will be different. Too expensive to make.

@rebellucy5610 3 жыл бұрын

@@SliceyDicey he can charge more. I was hoping to pick one up. I got a nice half track, but prefer larger knives.

@LowenKM 2 жыл бұрын

Beautiful stuff, if folks can afford knives as a buncha 'art object$', that they never wanna risk getting _'dirty'._

@MrLuckeastwood 3 жыл бұрын

I bought one years ago for 500 dollars. It's a good knife but it wasn't for me. I got rid of it. I've been thinking about getting another one but Its alot of cash. They don't excite me for some reason.

@BParker55 3 жыл бұрын

You basically have to either save up or put aside money for one that you want ready to spend at a moment's notice lol absolutely hate that. Am I in the process of doing that anyways? Yep. Let's remember that the more quantity goes up the more quality goes down.

@hardleydangerousmaun 3 жыл бұрын

Oh and you need an Eklipse already Bryan.

@SliceyDicey 3 жыл бұрын

I've had two.

@19Bearsfansince79 3 жыл бұрын

@@SliceyDicey I can't speak for any of the older generation eklipse, but the new one is unbelievable the fit n finish is just so awesome

@stevemilk4526 3 жыл бұрын

Am I right in remembering the 3” skinny is a liner lock and not a frame lock?

@SliceyDicey 3 жыл бұрын

Yes it is.

@stevemilk4526 3 жыл бұрын

@@SliceyDicey Thanks Brian. So would you skip the smaller one being it’s liner lock or is it still a good first buy for a 3” model? I am looking for my first one and want it to be 3” just not sure being it’s a liner lock.

@SliceyDicey 3 жыл бұрын

@@stevemilk4526 Not all are liner locks. Most are framelocks. The liner lock was a pocket destroyer with that rough G10 on both sides. Not sure they make that anymore.

@stevemilk4526 3 жыл бұрын

@@SliceyDicey awesome

@ZHB1989 9 ай бұрын

But isn’t there an issue where is a 19 year old is getting sued by a certain company because of Rockwell hardness testing?

@peterpuleo2904 3 жыл бұрын

They cost about twice as much as the Zero Tolerance knives I have seen. Are they twice as good? I do not have any "high end" knives and I am considering just one to add to my collection, which is NOT high end. ZT looks more stylish to me.

@19Bearsfansince79 3 жыл бұрын

If you handle a Zero Tolerance, and then handle a Hinderer, anyone with any bit of intelligence should be able to see the price difference and be able to validate it pretty easily...

@peterpuleo2904 3 жыл бұрын

@@19Bearsfansince79 Thank you.

@peterpuleo2904 3 жыл бұрын

@@19Bearsfansince79 There were some high end knives, including Hinderer, in a knife shop near my home. I never handled any because the prices were so high. I now regret my reticence. I have handled many cheap knives, and many mid-range, but never high end. The knife shop is now gone. I should have thought "Carpe diem".

@peterpuleo2904 2 жыл бұрын

Have you found a Hinderer yet?

@erhon5 3 жыл бұрын

A lot of the designs aren’t that interesting to me, but I would like to handle a half track someday (I like the look of the full track a bit more but obviously they aren’t making those anymore and it’s probably too big for me)

@spyhunter6411 2 жыл бұрын

How are you supposed to buy one? They are never in stock anywhere haha

@doofy28 3 жыл бұрын

I camouflage my scratched screws with sharpie.

@SliceyDicey 3 жыл бұрын

Tried it on this one. Refuses to keep it lol. And paint marker won't stick.

@harveycamacho2247 Жыл бұрын

Sorry but no knives are Worth $400 to 600 dollars. You can get a very nice Benchmade or Spyderco for a lot less and just as good if not better with great blades

@kabsx2945 3 жыл бұрын

Number 6 why buy - Made in OHIO USA!!!!

@JesseAdams 3 жыл бұрын

It would have been funny if you just popped on after the countdown timer and just said "YES, they're worth it!" And then just turn the feed off. People would bitch but, hilarious:)

@lcurtsinger4313 3 жыл бұрын

8 really, forward use cardbboatd, heck oaf down payment on something

@aleach07 3 жыл бұрын

I'd like to thank Rick for not making left-handed knives, saves me a bunch of money!

@SupraDeluxx-ro1qg 4 ай бұрын

ive gone down the should i buy a hinderer rabbit hole tonight. just to come to find the same revalation. i am left handed and its not worth it. its not worth getting a normal one because i cant get it on a whim. and a left handed one is even more rare and more of a price tag. Hinderer, Sebenza. you will truly never be perfect knives for everyone.

@jeffreymliss 3 жыл бұрын

It's easier to find honesty in politics than a Hinderer knife online.

@19Bearsfansince79 3 жыл бұрын

Really?? Have you looked at DLT trading? They have numerous versions of the new xm24 sheep's foot in stock still, and a bunch of the XM 18 non-choil slicers just dropped as well... Along with others

@e.r9111 8 ай бұрын

Hinderer knives are great.... Until you need something. I've never seen a company turn their back on customer needs like hinderer does. A replacement blade for an xm18 for years. I dropped it maybe 5 feet and the blade broke within days of getting. Called them and got told they don't do replacements regardless. I'd have to get a new blade. I've tried to find someone who'd make me a reblade and nothing. I've followed up periodically to see if it's changed and nothing. They're honestly a waste of money

@paulsouders3489 3 жыл бұрын

I can't even find one

@hardleydangerousmaun 3 жыл бұрын

Short answer. Heck yeah!

@xionski 3 жыл бұрын

Not a single Eklipse?

@SliceyDicey 3 жыл бұрын

I’ve only had one and sold it thinking there would be more. They’re pretty rare.

@bruce3579 3 жыл бұрын

The short sane answer is "NO!"

@liquidcobra1450 3 жыл бұрын

The XM18 is a fantastic design. It needs two changes though. And when I say needs, I mean NEEDS. First, change the pivot screw to torx. Second, the flipper tab is too pointy. It needs to be modernized desperately.

@DG__3 3 жыл бұрын

Reason #6 if you're left handed.

@TheLastRanger 3 жыл бұрын

Definitely not worth it. Unless you're doing well with your channel, ;)

@andrewmurray6776 3 жыл бұрын

not hardly...

@mrwoodchuck94 3 жыл бұрын

Short awnser: yes!

@toxicfpv304 10 ай бұрын

my father was also stationed at pope afb..... we was part of 3rd MAPS..... he is kind of the reason that i got into knives....

@sublyme2157 3 жыл бұрын

Five Guys is overpriced. There, I said it.

@stevewalker6340 3 жыл бұрын

Hinderererers are cool knives but I wouldn't want to carry around a knife that weights as much as a brick.

@erikramaekers63 3 жыл бұрын

Nope

@jamescase7612 3 жыл бұрын

I will say this and I mean it I dont care what knife it is to me 300 max and I dont give a S what knife it is what Its made of just me feeding these people doesn't help its just a fricken knife and most of you just put them in a Dewar so wtf