lol. I spit my drink out. Duuuuuuuuude!!! Nope, lol

Thanks for watching Evan.

Right on Shawn. We as entertainers must ensure we know what we're doing and not just see the ROI but also safety when it comes to stuff like this. Thank for supporting our channel.

Word bro. Not to be misleading there are certain materials that could burn. But if you follow the safety guidelines for use of these machines it should be OK. Because like I explain to someone else our stoves are safe but I'm pretty sure if we put a blanket in the oven and leave it would be disastrous. So use the machines within their safety guidelines. Well wishes to you sir.

@@tanyapatra5342 ok.

Thanks DG StudiosLLC.

Thanks for watching Jonathan. It's probably because they have seen someone use these in properly. To be absolutely fair anything producing any kind of spark affect can be a fire hazard without training and proper use. Then again so can every so can every stove in every house if not use properly used. It's all in a matter of training and safety. There are those who will embrace new technology like this and those who will not.

Any spark of any kind is a fire hazard, dude. Use cold sparklers at your own risk

@@djxsquizit Word.

You're welcome my friend. What you see in the video is what you get. I think it is definitely a matter of what kind of powder you're burning and I use what's called a "Titanium Composite". I have not tested out any feathers but I don't think I will NOT be operating my machines around feathers also. Best case scenario follow the instructions of the machines and definitely know if they are indoor versus outdoor rated. Good luck my friend.

It is the DMX Operator 384 from Amazon: amzn.to/3WmnBP7 It is attached to a powers conditioner for convenience though. Here's a video on how I put it all together: kzfaq.info/get/bejne/prmArNh2q8nYiH0.htmlsi=aHCLYzbjFph8dX9v

Thank you DJdon'sford.

You're welcome.

So other than the controller, what else do I need in order to make mine work like that? Are you wireless or cables?

Nevermind I see the cables

@@emarioniii a DMX Cable from the controller to the machines. However most of the machines don't need DMX because they come with remotes.

Yes sir. A regular broom will do just fine.

TI Composit. 200g.

They don't make these models anymore however I am looking into Vevor models as a replacement.

You're welcome.

Thanks for the update brother and I appreciate your watching. I'll look into the different colors as the need arise for it.

No there are a brand from china but are no longer made. Right now I'm looking into the Vevor models for replacement.

I bought these from Rasha Professional in 2019. There are many other models I'm starting to review so I'll update recommendations in the future. Thanks for watching.

Hello Steven, the technical answer is yes but so can a cigarette smoke if you stayed on a ladder and blew it close enough to one of the sensors. In reality though, venues across the planet are allowing these machines to be use in their facility because there are generally safe. You have to follow the rules to operate them and use common sense when operating them. To my knowledge I have not seen or heard of fire alarms going off.

Gracias por mirar mi amigo. Meses más tarde después de hacer ese video un amigo mío intentó eso y ambos aprendimos que el tul, la causa, el encaje puede incendiarse así que siempre dar una sesión informativa de seguridad a cualquier persona que estará alrededor de estas máquinas. Asegúrese de que usted tiene un montón de espacio para las novias especialmente para hacer el baile.

In Texas 500 - 650 a pair.

350 in California for a pair

@@noelfigueroa1690 nice.

Hello Doug. Here's where to buy it: amzn.to/4chBX99amzn.to/4chBX99 and her's how to build it: kzfaq.info/get/bejne/prmArNh2q8nYiH0.htmlsi=Z0bQ7z4UMxNUZkML

Any idea where can I get a portable power battery for drysparks?

@@doug73975 at the moment I'm looking into these: amzn.to/3IIrMgj

@@gfire_productions do u know if works with any coldsparks?

Hello Roland. Alibaba.com. Be advised that shipping is slow and if it breaks you must send it to china to be repaired.

@@gfire_productions Good vendors can send by DHL and takes about 6 days to arrive.

Word Brian thanks for watching.

That is unfortunate and hopefully no one was hurt. These machines are overall safe however, there are conditions where they could actually start a fire. Do you care to elaborate how the fire started as in what were the machines underneath and what did the sparks hit to catch on fire?

They are not safe in any way. When used in the right setting with proper safety measures can be ok, that’s why they require fire permits in all states in the USA!

Because sparklers are a fire hazard and people still take the risk to use them even though they look nice

Hello Dalida and thanks for watching. I don't know what happened at that venue you mention and my condolences to the families. Perhaps you can consult with the local fire department there and see if they're willing to release that information to you if they have it. In the meantime, our operations are safe.

The Cnn story reported it was fireworks not cold sparks .

Thanks for watching Miguel. Why do you think they're not safe sir?

Great response, Miguel 🙄

Why? No explanation? Thought so, npc

@@AldoRyan realistically is it the machine that is unsafe or the person operating the machine and safe. We drive cars every day I'm pretty sure if you fall asleep behind the wheel or being intoxicated behind the wheel of a car you could have a not so favorable outcome. So driving a car has rules and things you must do to operate safely. These machines are well capable to be operated safely if you operate them within the safety guidelines, rules and common since. Like any equipment it's not for everybody.

Ecerything that is a machine has to be maintained and operated with safety in mine. Proper set up and maintenance is always required. I also bring a a class D metals. Fire extinguisher 🧯 also strictly for this purpose. An iron in you home can cause a fire if you dont take precautions. Any one who is in the business needs to educate themselves before using any devices.