Are The Shimano Brake Pads Worth The Hype? / Installation + First Impressions - Talaria Sting R MX4
Рет қаралды 10,337
Жыл бұрын.
.
Shimano Brake Pads: amzn.to/41tBfQk
Goggles: amzn.to/41O9ZMp
Helmet: amzn.to/3ACZGiq
Gloves: amzn.to/3VhzYcG
Chest Pack: amzn.to/41uLdR2
+4mph amzn.to/3oq9uth
Lucas Gear Oil: amzn.to/42mS2ok
Gritshift Blinder Headlight: amzn.to/40rwoO8
Gritshift Blazer Headlight: amzn.to/411lWgS
ODI Number Plate: amzn.to/3ndnzds
Headlight switches:
Red Toggle Switch: amzn.to/3N0SDHY
Blue LED Button Switch: amzn.to/3H2BWIe
Shimano Brake Pads: amzn.to/41tBfQk
Shinko 241 dual sport tires:amzn.to/41o68FZ
3” riser bars: amzn.to/423dbUv
#talaria #surron #ebike #shimano
@freerfixedit Жыл бұрын
Shimano Brake Pads: amzn.to/41tBfQk
@DaBinChe Жыл бұрын
LOL. I ordered the same pads a week and a half ago and got it beginning of this week.
@Triggamike Жыл бұрын
Why Metal instead of Resin? Much love 🤙🏼
@DaBinChe Жыл бұрын
@@Triggamike metallic pads have more bite and last longer and have higher heat tolerance, down side is they can get noisy when wet and wear rotor faster
@freerfixedit Жыл бұрын
@@Triggamike resin pads will burn up quick with the weight and speeds of this bike. Metal last longer. There’s pros and cons to each but for this application, metal is better 🤙🏽
@ch40440 2 ай бұрын
Thanks bro! Been waiting to install mine, and I’m about to today!
@freerfixedit 2 ай бұрын
Awesome! Bed them in for a bit at first and they feel pretty great compared to the stock ones! 🤙🏽
@ch40440 2 ай бұрын
@@freerfixedit I got both wheels’ sets in, but after a couple days, the front set has started to squeak, any idea why? They haven’t gotten wet yet. Also when I roll the bike back-and-forth really slowly I can sort of hear them rubbing. do I adjust the calipers in anyway, or maybe when you tighten the main bolt back in? Is there a certain technique for it?
@freerfixedit 2 ай бұрын
@@ch40440 yeah, the squeaky pads may be from glazing. I noticed if it happened to me, if I rode and drug the brake slightly for about 50 feet or so about 2/3 times it would stop. Or you can remove pads and rub em on some sand paper. The rubbing may be from not having your brake caliper centered. I actually have a video on this about stopping squeak, but long story short, you want to hold you brake lever down while you tighten the 2 5mm caliper bolts. It should center your rotor better between the pads
@gageberger4215 2 ай бұрын
Following only because this was just the perfect video i was looking for with great explanation and even parts linked
@freerfixedit 2 ай бұрын
Glad it helped! Appreciate you! 🤙🏽
@jordonharris4980 10 ай бұрын
Exactly the video i was looking for. And the part links are in the description, definitely following now. Thank you
@freerfixedit 10 ай бұрын
Love to hear it. Thanks for the feedback and support!
@davidflanagan7214 Жыл бұрын
Hey Josh, super stoked on the content you have been producing! It’s very informative and greatly appreciated. I picked up a pair of pads and your replies answered my question on replacing immediately as I still waiting on mine to be delivered. Thanks man.
@freerfixedit Жыл бұрын
I just got back from a ride. They just keep getting better! Very impressed. My stoppies are better than ever now! Appreciate the feedback and glad they’re helping! 🤝
@user-qj4um2wj6i 10 ай бұрын
Thank you from Australia I have the pads ordered your video will help when I change my pads.
@freerfixedit 10 ай бұрын
Love to hear it mate! Cheers!
@TheCorrupterX Жыл бұрын
A more objective comparison would also test heat loading, doing 10 stops back to back and see how the distance changes with heat. that is where the real advantage of the shimano pads comes into play.
@joeyoviedo5202 11 ай бұрын
Quick, informative DIY and some testing 👍nice video
@freerfixedit 11 ай бұрын
Appreciate that! 🤝
@TLarry Жыл бұрын
I love shimano for my fishing gear, now ill love them for every time I stop on my mx4 😂
@freerfixedit Жыл бұрын
😂🎣
@SPROCK3TMONST3R 10 ай бұрын
Just the video I needed! Thank you!!👍
@freerfixedit 9 ай бұрын
Thanks for watching! Appreciate it! 🤝
@Oopsie223 Жыл бұрын
I’m headed home to do this right now. Thank you.
@freerfixedit Жыл бұрын
🤙🏽🤙🏽
@CampbellSuperKids 9 ай бұрын
Going to install my h03c pads today
@jamessmith8155 Жыл бұрын
Just subbed, found you through the Blood Sweat & Gears boys starting to go through your content and you're doing a bang up job mate keep it up. Just got a MX4R from the new batch there today to go with my MX3. This new batch comes with new color kinda an slightly off orange (it grows on you) black grips and a new bigger rear mudguard and i can't fault it, feels like a different bike altogether from the MX3.
@freerfixedit Жыл бұрын
Hey that’s awesome man, and thank you! That sounds a bit different. I wanna see a pic!
@jamessmith8155 Жыл бұрын
@@freerfixedit just uploaded a short video on my channel, it's the only thing there lol.
@Dommy_Doo Жыл бұрын
Love your videos man, super informative and easy to watch. Earned a sub
@freerfixedit Жыл бұрын
Thank you so much man! I’m trying my best! Appreciate you!
@Dommy_Doo Жыл бұрын
@Freer Fixed iT i just ordered a Sting R, should be here early June so im binge watching all your videos now lol. Looking forward to your next vids
@freerfixedit Жыл бұрын
@@Dommy_Doo that’s awesome! You’re going to love it! Dropping a new video tomorrow that’s going to be my thoughts/review after a month of riding, and everything I’ve done to the bike since I got it!
@ConnorGMedia 5 ай бұрын
Good review! Gonna throw these on my XXX!
@freerfixedit 5 ай бұрын
Thanks! Appreciate the feedback, hope you like em 🤙🏽
@zacchamberlain6652 Жыл бұрын
Love you videos. Keep it up!
@freerfixedit Жыл бұрын
Thank you! I really appreciate the feedback! It’s just the beginning!
@user-td5dq6ge5m Жыл бұрын
You are the man, ur videos are dope 😊
@freerfixedit Жыл бұрын
🥹 thanks bro! Really appreciate that!
@Anonymous_Sting_Rider Жыл бұрын
Great valuable information 👍 thanks keep up the great content and videos 👍
@freerfixedit Жыл бұрын
Appreciate the feedback more than you know! Thank you!
@Anonymous_Sting_Rider Жыл бұрын
@@freerfixedit being honest I enjoyed learning how much better I can Stop 🛑🛑🛑 by getting those break pads. I am recovering from landing on my knee and breaking a bone in it. So, I am hanging out with my neighbor You here on the KZfaq.... Showing support for your East Coast content.
@freerfixedit Жыл бұрын
@@Anonymous_Sting_Rider sorry to hear that! Heal up quick! These brakes keep getting better and better the more they bed in. Highly recommend as a budget brake option! I have no desire to upgrade anymore!
@uoka009 Жыл бұрын
Intro song is super catchy 🤙
@GregGottfried Жыл бұрын
🙌
@julieloudon7513 9 күн бұрын
I just got my Kool Stop pads from Lunacycle for $18, hope they're good. Gonna install them may today but it's too hot out in my garage
@freerfixedit 8 күн бұрын
let me know how you like them, my shimanos are about down to the metal
@ismevictor7289 Жыл бұрын
love the vids bro, just a question for you. i run the ho3a pads w resin, i haven’t tried the ho3c but how different do they feel if you have tried both?
@freerfixedit Жыл бұрын
I haven’t tried the resin pads. They probably bite a little more, but will wear out much faster than the metal ones, and thank you bro! Appreciate that 🤝
@kyleabbas Жыл бұрын
having issues since day one (had a week) with brakes rubbing despite centering, bleeding, etc. noticed you have completely diff calipers than mine. mine are all black and dont have the big bolts on the side. fighting with talaria now to make it right. not sure why theyre shipping different calipers to people. mine was from this newest batch last week. noticed one of your followers just got the new batch with orange decals and has the red calipers as well. crazy there is no consistency. great vid btw! love the content
@justinmorales4201 Жыл бұрын
Literally the same here, feel like these are completely different bikes i also have the all black calipers as well as my headlight is the square connector aswell its crazy.
@freerfixedit Жыл бұрын
Yeah... They are shipping with different brakes, grips, rear fenders, graphics, and headlight connectors... these items dont affect performance, so they didn't inform anyone they were doing this... The calipers you have are still 4 piston calipers, so I dont think theyre worse quality than mine... I think Talaria is having a hard time keeping up with demand, and they had to source parts from other suppliers to keep up... just my guess!
@dpg2826 Жыл бұрын
Standard China procedure. Whatever gets them out the door and on the ship.
@retrivn9367 Жыл бұрын
I’ve been having the same problem with the stock black brakes. Did anything work? @shaking shark?
@raparrish Жыл бұрын
Would you recommend these over the kool stop pads luna cycle just added for the talaria? The description they give on the site is they now have an ebike specific compound for better stopping power. Half the cost of the shimanos
@freerfixedit Жыл бұрын
I haven’t tried the kool stop pads so I can’t say. Looks like they don’t have the cooling fins like the shimanos, so will probably fade more when they heat up. But for half the price, and if there compound stops as good as they claim, might be worth a shot. But I can speak for the shimanos and say they are great. Now that they’re worn in I can lock up the back brake with 1 finger no problem
@randyboughan4909 10 ай бұрын
I have the new cool stop pads in my hand right now going to try them out today
@tuzzey7 Жыл бұрын
What's the phone mount on the battery cover?
@freerfixedit Жыл бұрын
Stay tuned for fridays video!
@portnuefflyer Жыл бұрын
I like your heat comment, a TORCH, applied correctly, is way better than a electric heat gun or hair dryer.
@freerfixedit Жыл бұрын
For sure! I used to work at a wrap shop and torch was the way to go for heat!
@Theking-qx4zd 3 ай бұрын
Do another video on all the mods you’ve done ❤🔥🔥🎯
@freerfixedit 3 ай бұрын
Might have to do somethin like that here soon. My charger died so I’m stuck in the garage until the new one comes in 😅
@Theking-qx4zd 3 ай бұрын
"Yeah, also got a question, bro. My Sting R is completely stock. What first upgrades would you recommend? And how do I improve my brakes 'cause they're shit, barely stopping the bike? My bike's 2 weeks old."
@freerfixedit 3 ай бұрын
@@Theking-qx4zd shimano pads are the cheapest way to improve the brakes without spending a ton of money. I’ve also read that clones on Amazon for a fraction of the price are just as good. Also, the bikes ship with oil on the rotors to prevent rust. It’s a good idea to clean rotors with isopropyl alcohol to get rid of the oils. As well as centering the calipers. Check out my talaria playlist to see a video on how to do that. Hope this helps!
@Theking-qx4zd 3 ай бұрын
@@freerfixeditcheers what first upgrades would you recommend to 👍🏽
@freerfixedit 3 ай бұрын
@@Theking-qx4zd foot pegs, 3 inch riser bars. Direct mount stem. Most of it is in the Amazon upgrade video in the talaria playlist 🤙🏽
@arimash8250 9 ай бұрын
I just installed these today and noticed even after adjusting calipers there’s alot of noise. I also noticed theres almost zero space between the pads and the rotors. Is that normal?
@tylersidmore4216 9 ай бұрын
I’m having this same issue, have you figured out any solution to this?
@jordanberardi15 Жыл бұрын
did you need to put some type of oil on all the plugs in front of your handlebars ? idk what some people are talking about
@freerfixedit Жыл бұрын
Leme guess… good ole Bill on fb 😂 no, I didn’t. I just disconnected and removed all my sensors, and taped up the open connectors. People say to dielectric grease all your connections, which in my opinion is not necessary unless your ride in extremely wet conditions. Even then, these connectors are pretty wrapped up. Won’t hurt and will prevent water from doing any shorting, but not necessary
@jordanberardi15 Жыл бұрын
@@freerfixedit YES it was him !! I was so confused when he posted that. So I don’t have too worry about doing that ? And is there anything else I have to do once I get the bike set up ?
@freerfixedit Жыл бұрын
@@jordanberardi15 just ride it and try not to smile too hard 😁
@Robbe1912 11 ай бұрын
how do you stop these sintered metal pads from squeaking louder than a cars horn? cleaning them doesnt really make it go away
@freerfixedit 11 ай бұрын
Idk, it comes and goes for me… just got back from a ride and front was squeaking. It’ll be silent tomorrow. I don’t get it, but cleaning the rotor with some brake parts cleaner and doing a proper bedding procedure should help
@Robbe1912 11 ай бұрын
@@freerfixedit i got these pads on the front and back now. riding my ktm sxf on the track i never get brake squeaking, so maybe the secret ingredient is dirt on the pads😅
@michaelglover8210 Жыл бұрын
What battery cover is that?
@freerfixedit Жыл бұрын
Tomorrows video will be a 1 month review and everything I’ve done to the bike so far. Stay tuned 😎
@ComeToThySelektor 10 ай бұрын
What kind of calipers are you using?
@freerfixedit 10 ай бұрын
Stock. The first batch of mx4s came stock with surron style calipers, they now come with similar 4 piston talaria brand calipers. All the same thing and pads fit both
@Nobody___ 11 ай бұрын
My mx4 didnt have those little safety clips
@freerfixedit 11 ай бұрын
The spring clip that goes between the pads or the circular clip for the caliper pin bolt?
@DevinFife23 11 ай бұрын
Hey man I’m having a hard time getting these pads to fit back into my caliper… they’re the BP-H03C-MF model right?
@freerfixedit 11 ай бұрын
I don’t remember having a BP in my part number. H03C-mf, they’re the pads linked in the description
@DevinFife23 11 ай бұрын
Thanks for the quick response. I got the pads in but I notice that the left pad feels a bit loose compared to the right. I just did a quick test and it seems to be braking a lot better but the left pad definitely has some play.. is that normal?
@freerfixedit 11 ай бұрын
@@DevinFife23 yeah they’re just kind of loosely held in there by the spring clip and pin bolt. You did install the spring between the pads right?
@DevinFife23 11 ай бұрын
@@freerfixedit I did install the spring clip but felt a lil looser than I thought it would… probably fine?
@freerfixedit 11 ай бұрын
@@DevinFife23 as long as you screwed the pin back in through the pads, and have the safety clip, the pads can’t go anywhere so I would say yeah. Mine wiggle around too
@FreshRides Жыл бұрын
Why did you take your fenders off? just to fly under the radar?
@freerfixedit Жыл бұрын
Yeah… just to look less like a dirtbike on the road. I’d put them on for dirt. I’ve ridden through water and gotten roosted in the face multiple times 😂
@craigchenery604 9 ай бұрын
Bought same but holes r off by 1 mm screw does not go in straight did u widen clip hole ?
@freerfixedit 9 ай бұрын
No I didn’t. They just fit right in. First I’ve heard of this, you sure everything’s right?
@craigchenery604 9 ай бұрын
Yeah I hold new ho3c pads in old clip and holes r off
@freerfixedit 9 ай бұрын
@@craigchenery604 why are you using the old clip? The pads come with a new one
@craigchenery604 9 ай бұрын
@@freerfixedit cause I'm dumb lol thanks dude
@freerfixedit 9 ай бұрын
@@craigchenery604 😂 no problem bro!
@Shmack_ 8 ай бұрын
Def don't use any pittsburg harbor freight allen keys. You'll strip your bolts out quick.
@edmundhadid7883 9 ай бұрын
my front brake on my mx4 is making noise when i brake:( i recentered my caliper & still making the noise💔hellppppp
@freerfixedit 9 ай бұрын
Try cleaning the brake rotor with brake parts cleaner
@freerfixedit 9 ай бұрын
Also, the stock pads are garbage
@spiXel1g 10 ай бұрын
Been a few months, are you still happy with the upgrade?
@freerfixedit 10 ай бұрын
Yeah. Little squeaky, but I think it’s cause I need to clean my rotors. But best cheap brake upgrade you can do imo
@spiXel1g 10 ай бұрын
Thanks. You bought 2 of the amazon linked product right, 1 for front and 1 for back?@@freerfixedit
@ChrisRouxPhotography Жыл бұрын
Same pads for front and rear?
@freerfixedit Жыл бұрын
Yep. Metal. Not the resin version
@MPowerSubie12 10 ай бұрын
@@freerfixedit metal is trash so squeaky
@freerfixedit 10 ай бұрын
@@MPowerSubie12 resin wears out in 5 min. Pick your poison 🤷🏻♂️
@cazpurr4128 Жыл бұрын
The bike comes with the Allen keys haha
@TylerHemmings 5 ай бұрын
I wish you showed the front brake install cause these MOFOs will not go on
@freerfixedit 5 ай бұрын
its the same as the rear... what are you having issues with?
@TylerHemmings 5 ай бұрын
I guess the pistons on the caliper were protruding out too much and I had to push them back in to fit the new pads on. It was a mission, but we figured it out.@@freerfixedit
@freerfixedit 5 ай бұрын
@@TylerHemmings nice, glad to hear it! 🤙🏽
@Smilldon Жыл бұрын
Put these on my talaria and they scream like crazy and my rear brake is just mush and wont bite… i must be doing something wrong
@freerfixedit Жыл бұрын
They take a little time to wear in before the bite gets better. You just swapped pads right? Didn’t mess with cables or anything? No oil leaked out?
@freerfixedit Жыл бұрын
Also need to center calipers when installing new pads. Check this out kzfaq.info/get/bejne/otyah7qp19zbpaM.html
@Smilldon Жыл бұрын
@@freerfixedit yeah all I did was change pads and they scream like crazy and dont bite. Already put 60 miles on them and still nothing
@freerfixedit Жыл бұрын
@@Smilldon that’s weird. You got the metal version right? Not the resin? Everyone else has said good things. I wonder what’s going on with them. Maybe clean rotors with brake parts cleaner?
@Smilldon Жыл бұрын
@@freerfixedit got the ho3c Just bled the brakes and it fixed nothing
@mcr.onwheels Жыл бұрын
If i tried to do this test in the UK by the time i went back to the spot it would have rained and the chalk would be gone 😂
@freerfixedit Жыл бұрын
😂 had to wait a day to make this video cause of rain
@mcr.onwheels Жыл бұрын
I'll probably get these pads but my stock still have a decent amount of life
@mcr.onwheels Жыл бұрын
@@freerfixedit ahah! 🤣
@freerfixedit Жыл бұрын
@@mcr.onwheels so did mine…throw em in the trash 😂 these kept getting better and better after this video because they weren’t bedded in yet. I’m very happy with them and feel no desire to upgrade the brakes anymore
@mcr.onwheels Жыл бұрын
@Freer Fixed iT That's sweet! Mine also make that sound that your stock ones did but on the back
@barryhallsack8852 Жыл бұрын
I'm just going to try to hijack these brembo brakes off this old KTM 200 I have 😂.
@freerfixedit Жыл бұрын
Let me know if it works out!
@barryhallsack8852 Жыл бұрын
@@freerfixedit yeah I just went in my garage and looked at it it will have to be some type of hybrid system there's no way the KTM rotors will fit on the rim 😂 The hub is way bigger on the dirt bike
@MrErichonda30 Жыл бұрын
Probably better once broken in.
@freerfixedit Жыл бұрын
Much better now!
@zainkagalwala3000 Жыл бұрын
shimano pads are still mountain bike breaks
@freerfixedit Жыл бұрын
So are hope v4s 🤷🏻♂️ these just make the brakes feel a ton better. I’m happy with them now to where I don’t feel the need to shell out hundreds for magura or hopes
@LarryRichelli Жыл бұрын
Such a cliche to be wearing a helmet when not riding! Another guy worshiping Surronster
@freerfixedit Жыл бұрын
Nah just a guy with a mic in his helmet who wants quality audio in the clips. Hope you find better ways to spend your time in life 🤙🏽
Freer Fixed iT
Рет қаралды 9 М.
Yemangos!KYD
Рет қаралды 9 МЛН
Fabiosa Best Lifehacks
Рет қаралды 37 МЛН