Area 5150 Demo @ Evoke 2022 (Audience Reaction)

No video

Area 5150 Demo @ Evoke 2022 (Audience Reaction)

Рет қаралды 12,935

Күн бұрын

Here is the audience reaction to Area 5150, first place in the Alternative Platforms category at the Evoke 2022 Demoparty in Cologne, Germany.
This demo runs on an original IBM PC 5150 @with 4.77MHz with 640kb of RAM and an IBM CGA graphics card.
www.pouet.net/...

Пікірлер: 93

@senilyDeluxe 2 жыл бұрын

there's a hole in the floor under where my jaw used to be

@PCRetroTech 2 жыл бұрын

LOL

@nickwallette6201 2 жыл бұрын

I would have loved to see Stewart Cheifet’s reaction if you walked on set with this on a disk. “🤯 ... Well. That’s all the time we have for today. We hope to see you next week, on The Computer Chronicles.”

@PCRetroTech 2 жыл бұрын

Ha! That would have been amazing. That reminds me, I forgot to mention in the video that a few very famous people have actually seen it and given really amazing comments. Relying on memory, but I think this included John Romero and Tim Sweeney!

@nickwallette6201 2 жыл бұрын

@@PCRetroTech That's a heck of a compliment. I would say congratulations, but I'm not sure it would stack up in comparison. haha :-D

@PCRetroTech 2 жыл бұрын

@@nickwallette6201 Ha ha! Thanks. {quickly Googles Nick Wallette}

@nickwallette6201 2 жыл бұрын

@@PCRetroTech LOL I'll save you the time. To anyone but my cat, I'm nobody of consequence. :-D (And to the cat, I'm just Food Guy.)

@wittonleung8732 Жыл бұрын

What a crazy achievement! It took 40 years for the IBM PC 5150 with 4.77MHz i8088 CPU to finally evolve into the ultimate performance mode! Thank you!

@DougDingus 2 жыл бұрын

That little beeper system sounds GREAT in the room with the big speakers and echos.

@PCRetroTech 2 жыл бұрын

Yeah it sounded pretty amazing. That was one pretty awesome sound system. The high pitched sound in the credits was fortunately not too terrible either. I don't know if the people responsible for the sound system filtered it out to some degree, but in the video itself it is really evident. I don't know how the organisers knew what volume to use and how to EQ the whole thing because as far as I know there was no dress rehearsal for the sound.

@DougDingus Жыл бұрын

@@PCRetroTech Interesting. You know, it might just be the room and robust speakers does the trick. What helped it out a lot was the bit of echo. That takes the sharp, flat edges off the otherwise really bland square waves. It was just nice. And WOW. Abusing CGA can really produce. That was a lot of fun, and I'm very happy to see the early 8 and maybe soon 16 bit PC's get some scene love. I love hardware at that scale. It's the most fun and rewarding and impressive when people squeeze some great art out of it.

@loseControlGD Жыл бұрын

beep beep beep beep beep to Beep Beep Beep

@Rickdens 4 ай бұрын

@@PCRetroTech was a mic put right near the pc speaker or did you guys put some kind of output jack to allow them to attach to their amps?

@PCRetroTech 4 ай бұрын

@@Rickdens If I recall correctly, the output was taken directly from the speaker connector. The audio had to be clean as the sound system was about 50,000W. It actually shook your clothing it was so powerful!

@kreuner11 Жыл бұрын

Wow, nobody ever got excited about a 640x200 image at 16 colors but this is great

@PCRetroTech Жыл бұрын

Well, the card can only do 2 colours at that resolution. :-)

@bluebull399 Жыл бұрын

Technicalities aside, this was a well presented demo. It lures you in and builds you up slowly. 16 Colours at 640 x 200, even I stood up and started clapping, and I'm just sitting at home watching this on KZfaq.

@MarcShake Жыл бұрын

Imagine showing that to a kid in the 90s.. I was 12 or something when I watched second reality on a 386. Watching this on a much older machine would have killed me 😂 Awesome work.

@PCRetroTech Жыл бұрын

I'd have been flawed if you showed me an iPhone at age 12, but only if you could program it. This is the sort of thing I'd love to have done with my XT when I was a kid, but I certainly didn't have the know how back then.

@damouze Жыл бұрын

I remember when I saw Second Reality for the first time. A friend of mine showed it to me and I was blown away (kind of like with this demo 😉). I also remember us having delusions of grandeur and starting our own demo group, which of course never amounted to anything because none of us four (or were we five?) were 'that kind of genius'... Other than a script for our first demo and a couple of tools of dubious quality, nothing ever came of it.

@saliue Жыл бұрын

I remember watching 8088mph for the first time and it was super cool. Found this demo couple of months ago and my jaw dropped and hit the floor and couple of days ago I showed this to my dad and the same happened to him haha, definitely my favorite demo till now!

@PCRetroTech Жыл бұрын

Thanks, I'm glad you both liked it!

@Sans-fl4pe Жыл бұрын

In my entire life, I would have never thought that an amazing show of sheer skill ran on an IBM 5150 at 4.77mhz and only 640kb of RAM would be rendered and displayed to me with an RTX 3060 with 12GB!! of VRAM at 1777mhz

@cruncherx86 2 жыл бұрын

Incredible demo!

@SixOThree 2 жыл бұрын

I'll second that. Wow. Just wow.

@Cr4z3d 2 жыл бұрын

Music sounds like the Zak McKracken intro lol, love it.

@procactus9109 Жыл бұрын

This is crazy and all at 4.77MHz

@easyerthanyouthink Жыл бұрын

Is it 4.77 ? Or did it just say 8088 and cga.

@procactus9109 Жыл бұрын

@@easyerthanyouthink its the last thing on the screen at the end. It says 4.77

@ayan.debnath Жыл бұрын

Breath Taking....

@GORF_EMPIRE Жыл бұрын

Impressive for the platform indeed. Nice work kids!

@_techana Жыл бұрын

TTL CGA??!! Can't believe it! Impressive!

@PCRetroTech Жыл бұрын

Yep, absolutely!

@ropersonline 2 жыл бұрын

5:57: Is that a Digger reference? OMG, it's full of Easter eggs!

@user-wk5pq7et3d 2 жыл бұрын

Это шедевр!!! Невероятно!

@jubjunior 2 жыл бұрын

Amazing!!

@ChristianCostaBatageloSC 2 жыл бұрын

Very impressive 🤩

@fygarOnTheRun 2 жыл бұрын

Holy Crap, this is mighty impressive!

@tuomollo Жыл бұрын

I like the effect of the black clapping silhouettes on the bottom. How was it achieved?

@PCRetroTech Жыл бұрын

Ha! Yes, that was the most expensive part. That involved putting actual people on aeroplanes and sending them to Germany.

@emersonlopes83 2 жыл бұрын

Unbelievable

@krakulandia 9 ай бұрын

Pretty amazing.

@funkykoval2099 Жыл бұрын

Great prog! Keeps me from throwing away my Amiga !

@user-lq8vv5ij3h Жыл бұрын

Очень круто. Если бы это увидели в 1981 году, охренели бы.

@movax20h Жыл бұрын

Wow. How is that even possible. So magic undocumented CGA modes, changing stuff on the fly I am sure,.

@PCRetroTech Жыл бұрын

There are undocumented modes, but I think we don't use any in this particular demo (other than the "undocumented" but actually quite well-known 160x100 mode). There's a hell of a lot of changing stuff on the fly. But there are lots of undocumented tricks there too. There are people on other platforms with the same chip who aren't going to be that surprised by most of it. But anyone who doesn't know much about the 6845 is going to be really surprised by it when the writeups are done, methinks.

@kijete Жыл бұрын

@@PCRetroTech where was the 160x100 mode used??

@PCRetroTech Жыл бұрын

@@kijete It depends how you look at it. If any 80 char mode with two pixel high chars and two colours per char is thought of as 160x100, then throughout. But as an actual 160x100 mode with half char wide "pixels", maybe only one effect, e.g. the chessboard (if that even counts). I only worked on one effect extensively, so getting down into the specifics isn't really possible. I'll be just as interested to read the writeups when the final version is done as everybody else will be.

@AnonymousFreakYT 2 жыл бұрын

I'm unclear - it says "no composite tricks", but it certainly looks like it has the slight fuzziness of composite - is it actual TTL CGA just run through a video digitizer that gives it composite softness? Would it look this good on an actual 5153 CGA monitor? Edit: Watched the direct capture (on x86VileR's channel) and yep, definitely TTL mode. Wow.

@PCRetroTech 2 жыл бұрын

Yes, definitely. Any softness is just my camera and KZfaq. And I can confirm it looks amazing on a real 5153

@Saturn2888 Жыл бұрын

@@PCRetroTech how was that done without composite?

@PCRetroTech Жыл бұрын

@@Saturn2888 The monitor is capable of 16 colours. It's just a matter of using lots of CRT controller tricks to ensure as many of them are displayed as possible. Of course text mode can display 16 colours at once, so chopping up a text mode is the main idea.

@Saturn2888 Жыл бұрын

@@PCRetroTech are you releasing a video on how you do that? I'm curious how you got such detailed graphics in text mode.

@PCRetroTech Жыл бұрын

@@Saturn2888 I think a lot of people are curious about that. There is a video on the channel about how I did my part (the Glenz effect), but everyone will have to wait for the writeups that the other guys release to find out how everything else is done. First comes the final version though, which everyone is going to start working on in October I believe (but it could take an indeterminate amount of time to finish).

@natr0n Жыл бұрын

Impressive demo on a dinosaur system.

@izools 2 жыл бұрын

Amazing. That's stock 5150 CGA too with no sound card or accelerator card / co-processor / NEC V20 etc isn't it? Absolutely phenominal work. I may have to acquire a 5150 again. Just recently sold one after restoring it. Thank you for sharing this with us ❤️

@PCRetroTech 2 жыл бұрын

Correct. The machine has 640kb of memory, but it's a stock 5150 (with hard drive for now, although there are people running it with a dual floppy). Final version may run on a single floppy.

@MrMarianoamigo 2 жыл бұрын

good, c-64 level

@VierPuntNul Жыл бұрын

respect!

@asanjuas Жыл бұрын

Breaking emulators, again??

@PCRetroTech Жыл бұрын

Absolutely!

@FavoritoHJS 2 жыл бұрын

Part of me is curious if, by using interlaced mode on the CRTC, you can get some different bit patterns on the characters that could work better in some cases? At the very least, by using only lines 1 and 3 or 2 and 4 of each character, that could be a low-maintenance 1024-color-on-composite setup right there (U and !! are long enough to still work, and both dithers would line up by skipping every other line). Also could allow, for example, alternating 2 and 3 lines per char so you can go further into overscan or have a scroll buffer without impacting image quallity that much. Making art for that, on the other hand... A small potential bug: Looking up on the heightmap landscape takes longer than I would expect (at least if it's just "scroll the viewport up a couple of chars", like it was usually done), and, if swivieled too much, seems to break everything (though that could be 86Box not emulating REP MUL, if that was used...) Also, the music sync varies depending on when you exit that scene -- if done just right like here, it swaps smoothly onto the credits, but in VileR's recording it doesn't. PS: Good, KZfaq didn't send my comments to the trash can for once! PPS: How could you get the actual original card font onto a text tweakmode for the intro!? Unless I'm missing something, you can't get lines THAT fine in true text, so it has to be a tricky-to-draw-exactly tweakmode...

@PCRetroTech 2 жыл бұрын

I've never personally used the true interlaced mode. It's easy to find statements to the effect that it doesn't work at all on the IBM PC. I've heard rumours about people rescuing something from the mode, but I'd have to consult with them to see what is possible. But unless they've already used it in a demo, it'd be a closely guarded secret. Having never seen the interlaced mode work, I'm not even sure what it does. It makes sense that it pulls from odd and even lines of the character for alternate frames. But I'm not sure exactly how to suppress one frame being displayed or whether the lines end up on consecutive rasterlines on the CRT. I also don't know how you'd detect which frame was being displayed at any given time. So at first blush it seems like there are some technical complications. Certainly 86box won't accurately emulate the voxels landscape. As for your PPS, well that's a detail I can't reveal until one of the others does a writeup. Actually, I didn't look into how it was done myself, and I originally thought they just simulated the original font. But obviously there are a few possible ways to think about and I'm actually not sure which was used.

@andrewmjenner 2 жыл бұрын

There are certainly some interesting things possible using the interlaced mode on the CRTC. But there are also some complications which make it difficult to set up. We didn't end up using that mode in this demo, but do watch out for future projects... Area 5150 doesn't use REP MUL so it's quite likely that the bug you mentioned is present on real hardware too. The height controls don't just scroll, they rewrite the perspective table which is why they are so slow - there are various optimisations possible if that code ends up in a game or a demo which uses these height changes.

@DougDingus Жыл бұрын

@@PCRetroTech I read the half scan line isn't output on the CGA. It's been a long time, and I'm struggling to remember the source. Back in the day, some of us were wondering about better vertical resolution and how many machines did not seem capable of it.

@easyerthanyouthink Жыл бұрын

@@andrewmjenner is it 4.77 mhz or.faster ?

@andrewmjenner Жыл бұрын

@@easyerthanyouthink 4.77MHz

@lo2740 Жыл бұрын

this is what masters do

@joshhiner729 2 жыл бұрын

I searched youtube for some basic info on how they manipulated graphics modes to create the different sections of the demo and couldnt really find much. I believe in your video you mention manipulation of ascii modes. Is it possible for you to give a quick overview of the methods used to bang on the 6845? Would any of the modes be feasible in an application or game or do the techniques used eat too much cpu?

@PCRetroTech 2 жыл бұрын

Many of the effects are very CPU intensive and their facility in a game would be doubtful. It would be possible, but it's a huge amount of work. Some of the "modes" do require CPU cycles to remain in the mode, but the amount of time depends on the effect. As for how it is all done, there will be writeups by everyone eventually, and also a final version of the demo. It would not be right for me to talk about anything other than the effect I contributed. Besides that, everyone needs to take a break right now. Producing a demo on this scale is exhausting.

@joshhiner729 2 жыл бұрын

@@PCRetroTech Understood. I did just read about the 6845 chip and discovered many exploitable items such as how the chip reads one line of character at a time repeatedly until the end of the character which could be used to manipulate horizontal resolution effects then a start of new frame poke at any time etc.. so now some things become more clear. Thanks for the reply.

@joshhiner729 2 жыл бұрын

@@PCRetroTech Wow I didnt realize just how programmable that chip is and that other circuits handle color although I should have known about the color portion especially since this chip is used in so many areas and each implementation produces varying (or no) color.

@wizardofboz76 Жыл бұрын

I always love trying to figure out the how - and the only thing I can come up with is borrowing from some super old school c64 techniques?

@ShadowsThe1 Жыл бұрын

Maybe I need to see if my 5155 is repairable.

@PCRetroTech Жыл бұрын

Always a fun project, even when there isn't a new demo to try. 🙂

@MatthewSuffidy Жыл бұрын

N i c e

@beholder2012 Жыл бұрын

Guys, why only now? It should've been published like 40 years ago… 😁

@PCRetroTech Жыл бұрын

Had a few things on. Just wait to see what we have for 2064. 🙂

@beholder2012 Жыл бұрын

@@PCRetroTech OK, I'm patient. 😄

@Pixelschillnobrain Жыл бұрын

It s for showing that with developpment is more important than just Moore law! All the game could be far better with a real optimisation.

@beholder2012 Жыл бұрын

@@Pixelschillnobrain I'm aware of this - was just kiddin' (although really it would be handy to know this all that 40 years ago…).

@ChadDoebelin Жыл бұрын

Hi! I downloaded and tested this out on my Tandy 1000EX. It doesnt quite work correctly. Some parts are absolutely fine. Others, not so much. I would provide you with a capture if it's helpful. I'm saying this fully understanding that the target was an IBM 5150. I also read the .nfo file in the archive that says "We intend to release a final version later in the year." Please consider my request to add Tandy support if you're able in the final version?

@PCRetroTech Жыл бұрын

I think it is highly unlikely this will be ported to Tandy 1000. Having said that, at least the CRTC is loosely based on the MC6845, so it is not completely and totally out of the question that it could possibly in theory be done, at least in part.

@douro20 Жыл бұрын

@@PCRetroTech Isn't it also highly sensitive to memory timings as it does software DRAM refresh?

@PCRetroTech Жыл бұрын

@@douro20 Area5150 might do software DRAM refresh near the very end, I forget now. In general the effects at the end are harder to port because they do more and more crazy things for sure.