ArmorAsylum - Iron Man foam helmet - raw real time building.

Рет қаралды 360,654

10 жыл бұрын

Showing it apears simpler than explaining it ;)
I plan to add annotations bit by bit, as well as a time table index below so you can jump at the desired step of the building process.
JFcustom's PDO file for foam available here : www.therpf.com/showthread.php?...
Foam mats available here : www.decathlon.fr/tapis-fitness...
Enjoy ^^

Пікірлер: 164

@KroszerDaniel915 Жыл бұрын

Looking back at vids like this remind me how far prop making at home has come since...

@tylerjohnson4825 9 жыл бұрын

i just realized i used thicker foam for my helmet. watching this has helped me out a lot. thank you!

@ShowMeThePaws 10 жыл бұрын

That is some wonderful work, the lines are non-existent from a distance and look very clean on closer inspection. Great job.

@1unchb0x58 5 жыл бұрын

Wow. Great quality! Truly amazing

@dovel1000 6 жыл бұрын

Wow. This demo of yours has just made a pepakura project of mine easier. Thanks for putting your entire build up here!

@sadheartcreaciones 10 жыл бұрын

Nice work, I appreciate real time videos. Really help

@GothicMixx 8 жыл бұрын

great work, obviously lots of experience there

@phil7556 4 жыл бұрын

I Appreciate the intricate detail and skill in the precision cuts. So much fine labor. Over all great final result.......except the final finish. with all the minute detail, i thought the finish was rough....

@MrUnmake 9 жыл бұрын

Great video! was thinking about how no one really showed it step by step. Your video is perfect (Y)

@robocop5257 2 жыл бұрын

Great job on the mk 6 design

@dMahzuz 9 жыл бұрын

Hi, best video I've seen on how to make armor, without a word and understands great. Greetings from Spain and thanks for the tutorial. Like and subscribe you deserve.

@carloslesmes9528 10 жыл бұрын

Un maestro del eva foom sin palabras esto es arte

@kaze1577 10 жыл бұрын

woah, been waiting for this helmet build for a long time!

@Mikeological 7 жыл бұрын

I love the audio track

@Stuntguitarman 8 жыл бұрын

I use the same mats they are very easy to use and cut for detailed work... good video :-)

@aexion6992 8 жыл бұрын

+Lee H Good to Vanquish costume too ;)

@noman000000 10 жыл бұрын

thank you.

@NoflikOfficial 8 жыл бұрын

Very nicely done and thanks for the idea of using yogamats!

@El_Yose 8 жыл бұрын

Literally anybody who is into this are asuing yogamats.

@NoflikOfficial 8 жыл бұрын

+Yosephiab well no, most use Eva. These yogamats have a kind of film over them.

@jianmarcobarbeau156 7 жыл бұрын

i dot know anybody who does, mostly people do their research and don't.

@Zephyr_Ch. 9 жыл бұрын

Like the 3 first pages

@erbePPazzo 8 жыл бұрын

nice work! is there a way to make that Decathlon's foam smoother before painting?

@laurentg23589 9 жыл бұрын

According to the final result (with paint); Did you use resin to harden your helmet and have a plastic appearance ?

@kimpeinture8480 10 жыл бұрын

very nice

@forklift385 8 жыл бұрын

what thickness foam is this? and no sealing of the edges of the foam? Ive been told to take the heat gun to the edges before you hot glue them

@WolfCommander 9 жыл бұрын

wow only 3 hours to build the whole thing AND OUT OF FOAM (which is less forgiving and more expensive than paper) awesome!! so if i do this out of paper id just have to set aside 5-6 hours (an extra 2-3 because it will be my first "large" scale pepakura build)

@ziggybaker3446 10 жыл бұрын

Can you explain why you cut out strips of foam during the assembly process? Was it to get the seams to close better? It's hard to tell since there's no audio/explanation. Thanks!

@ajithkumar-ko9ct 10 жыл бұрын

Dude ur great - it will be great tat if u upload Batmobile templets 😊

@FarSeeker8 9 жыл бұрын

I have found that you have to *cover the entire edges* you are gluing together and then pressing them together while the glue sets *is very important.* If you don't the seams will be painfully visible. If you have an extremely long edge, you may do better to take it a section at a time.

@joshtimasprime 10 жыл бұрын

Beautiful build! I've made some pretty good stuff but its nothing in comparison to yours!

@erikaemeraldprizzi311 8 жыл бұрын

Do you find that the natural curvature of the foam lends itself to being used for this purpose, and if so, did you specifically cut parts so that when removed from the foam they bent to your advantage?

@ricmille10 8 жыл бұрын

Hello my friend, that was one really nice iron man helmet. you did it just like you've been doing it for along time. great job. if you don't mind me asking. Maybe you can share me the foam template for this helmet? I really appreciate it. thank's

@dimitrisKarakwttas 9 жыл бұрын

hello!first of all thnx for the upload it helped a lot!could you tell me what are you using to make paper cutter sharper?i can't seem to find anything like that.Thanks in advance!

@hectorarellano960 9 жыл бұрын

You can use an exacto knife

@gippyboys4632 10 жыл бұрын

Awesome

@marcosurbanogutierrez 5 жыл бұрын

Para que ocupas cuchilla ??, podrias haber cortado con las uñas....

@paulo1977pm 10 жыл бұрын

Friend climbing vc printed this helmet? Pepakura?

@olson_media 8 жыл бұрын

is it easy to bend and mold the shape???

@mgoldeneye 9 жыл бұрын

Amazing!!! =)))

@monstermask3212011 9 жыл бұрын

Hi I try to make this helmet... but shape of this helmet is hard to make in one place.. so If I glue all parts together is ok but how to put this:P or maybe use some glue inside to hae it in one place and then cut for 3 parts?

@Solobama 10 жыл бұрын

My build has takin for ever even with the cameo cutter that's crazy to see how fast you did this. Did you take any steps to harden the helmet and remove the faceplate

@armorasylum731 10 жыл бұрын

No, it's a one-piece helmet, and it remains flexible. Then the owner is free to coat it with resin and split it in several parts on his own.

@El_Yose 8 жыл бұрын

Well, I am in a fairly big community and we all use yogamats. Eva is not thick enough, but I guess it's up to you

@janetteflores6388 8 жыл бұрын

hey there, absolutely love this video and what you did!!!...now I tried to follow the links to get the print outs but I guess the thread has been deleted I was wondering if there was anyway of you emailing them; If you still had the pdf. files? Cuz I'm going crazy looking for them..LoL I'm crafty savvy not tech savvy

@dodoanderko4237 8 жыл бұрын

+Janette Flores Thread it is still there, currently downloading pep files... @ArmorAsylum: Thank you for tip on material and great video

@emoe1973 8 жыл бұрын

Can you make a pepakura set of nail clippers? Jeez!

@BITWarts3793 10 жыл бұрын

can hot glue gun be used to stick polyethylene mats??? i think the temprature is too much for the material :(

@santiagomez8619 9 жыл бұрын

can you tell me where are the descricion images for printing

@dariusseals2307 8 жыл бұрын

till this day, i can't find a good copy of the files for the foam build (iron man helmet)

@martianmilktvofficial 8 жыл бұрын

what knife r u using to cut????

@deanmcm6548 8 жыл бұрын

Would it be possible to make this helmet with 10mm Eva foam mats?

@TheTasteoflive 10 жыл бұрын

Hello I really liked your video but I have a question to harden and then paint when polyurethane foam how do you do? thanks

@monstermask3212011 9 жыл бұрын

You need to mix water with some glue for wood(white glue) and put about 5-10 layers. Then you put primer and then normal color

@TheTasteoflive 9 жыл бұрын

monstermask3212011 thanks

@simonhewitt8031 10 жыл бұрын

can you tell me which file you used for this helmet. in the link you provided there are a few foam downloads. this was a great video too .. thanks

@armorasylum731 10 жыл бұрын

The first of these few downloads contains the file you're looking for.

@simonhewitt8031 10 жыл бұрын

Thanks. I found it and have made the helmet and am half way through a king the chest armour.

@noman000000 10 жыл бұрын

hi you,r awesome .i,m just starting my iron man but i don,t know where to get the foam.can you help..

@petermoutons 10 жыл бұрын

It's just a yoga mat

@justinharrison9839 3 жыл бұрын

can you do a video on building a Robocop armor as well

@victorabud8025 6 жыл бұрын

Did you set it up to standard size ???

@MinecraftGamer-qc4dt 8 жыл бұрын

what size paper are you printing on

@sigpi 5 жыл бұрын

It's like watching a mime for 3 hours straight.

@somethingincommon3379 10 жыл бұрын

what foam are you using?

@iangunther597 9 жыл бұрын

where did you get the design ?

@robocop5257 2 жыл бұрын

Have you tried the classic RoboCop suit yet

@henrychan4728 8 жыл бұрын

need resin for hardening?

@jacksone2607 9 жыл бұрын

do you need pepakura to open the files

@Zephyr_Ch. 9 жыл бұрын

How can you print like dat

@carlosmaximoayaladiaz900 8 жыл бұрын

hey +ArmorAsylum where I can take images for printing i need the mold for my hemet iron man please answer to me

@syh2607 8 жыл бұрын

+Carlos Maximo Ayala Diaz Look in the description xD

@VEXPOcz 8 жыл бұрын

where can I get EVA foam?

@hmza125 10 жыл бұрын

Can you give me link to buy foam like you used from amazon. com

@megatronicprime9402 9 жыл бұрын

how do i open the PDO

@arthurmossle9530 7 жыл бұрын

What size was the person who wore it?

@santiagochamorro1257 6 жыл бұрын

And the templates Where can I get them?

@heydaksy 6 жыл бұрын

where can i get the pattern? thanks

@amranabdulwahabliew3776 6 жыл бұрын

How to find the link for the drawing pattern?

@YesImZharif 9 жыл бұрын

What is the best way to fill the gaps to cover the seams on foam?

@ReneeNme 9 жыл бұрын

YesImZharif Concrete.

@rayferreira4693 8 жыл бұрын

onde posso consiquir essa esponja e o preso?

@VyranisVane 8 жыл бұрын

why did u fix the face part with glue??

@RAKHALILAChannel 5 жыл бұрын

Thickness foam ?

@iangunther597 9 жыл бұрын

what sight?

@richardlbsman 10 жыл бұрын

what may i use to make an EVA foam helmet rigid?

@fantasmagamers 10 жыл бұрын

that depends on what you mean by "rigid", you can either add cardboard on the inside, or, you could spraypaint it with some coats of vinilic /pvc glue, or better the glue carpinters use, its like vinilic glue but more dense... Though, if you use the second choise, you should use several layers, if not, it will crack and doesn't look nice... an other choise, is to use more foam =P instead of a 5mm one, use a 10 mm.

@ganeshk7221 8 жыл бұрын

Sir, A little help.. I am going to create a Helmet.. At the Eyes part.. How can I place LED lights? I mean if I place them directly How do I see? Thank you in advance Yours Sincerely Ganesh. K

@RoxusRemo 8 жыл бұрын

you have them pointing down from above your eyebrows.

@yoamal1187 5 жыл бұрын

You kinda cant, everyone who makes this just opens the mask

@milagrosruiz6114 8 жыл бұрын

maybe you can put the molds in one link please

@horochigundam7648 8 жыл бұрын

this cool I'm doing a Iron Man articulated animatronic look on my channel this goal miss

@brayanjuliandiaznieto8899 7 жыл бұрын

wao aun que sea le fueran colocado musica de montaje

@olartenahum1 7 жыл бұрын

como consigo la goma eva que usted está utilizando? y si es posible me facilite los archivos de los trajes de iron man.

@Jasmi42 7 жыл бұрын

nahum olarte los tiene en la descripción todo y la goma Eva también está muy barata...😥

@ReneeNme 9 жыл бұрын

TRIM YOUR NAILS !!!

@mgreddy1729 5 жыл бұрын

What is that material...

@juansebastianalbanilrodrig8479 9 жыл бұрын

Por favor envía me el link de descarga para hacerlo

@aspect7606 5 жыл бұрын

Can u linh the template please

@doodlelegend9749 3 жыл бұрын

Were are the pdf files??????

@michaeldeniel8149 7 жыл бұрын

2mm?

@obengexe8683 9 жыл бұрын

The paper what? A4 or not?

@92Fernandaa 9 жыл бұрын

Cuales son las medidas? Los enlaces que dejas en la descripción no lo dicen :c Ayudaa >n

@thegreatestevil1616 5 жыл бұрын

For fucks sake learn to speak english

@JaimieLeaDanforth 7 жыл бұрын

do you have any child size templates for a 10-12 year old boy?

@kebinhobinho 7 жыл бұрын

no progama pepakura voce mesmo pode calcular o tamanho que voce quer

@zoeycox8911 9 жыл бұрын

What material did you use to make this ?

@degenerate1365 9 жыл бұрын

It says in the title. Foam.

@ReneeNme 9 жыл бұрын

zeke cox It was made using titanium. ( rolls eyes )

@Toretto208 6 жыл бұрын

Ma perche a mè viene diversamente se ho seguito gli stessi suoi passaggi!!!!!

@ravindrasharma396 3 жыл бұрын

Which age of child can wear it

@harrthom7328 10 жыл бұрын

Also, where did you get the files?

@armorasylum731 10 жыл бұрын

You have the link in the description. ;)

@harrthom7328 10 жыл бұрын

ArmorAsylum Argh thank you

@Kcb_creations 7 жыл бұрын

link doesn't work

@mikeandbirgit 10 жыл бұрын

what size of foam is it?

@armorasylum731 10 жыл бұрын

6.5mm Just follow the link in the description. ;)

@Amber-si7kx 9 жыл бұрын

listen to some death metal while watching, XD

@tcpipocapipoca5362 6 жыл бұрын

Me passa o molde

@toxich1n1 8 жыл бұрын

wow, you are using a fitness mat to do that.

@RohitSingh-vn9qg 6 жыл бұрын

Bro full suit ka paper pe design bhejo na

@harrthom7328 10 жыл бұрын

What foam did you use?

@armorasylum731 10 жыл бұрын

These fitness mats come from here : www.decathlon.fr/tapis-fitness-mat-essential-id_8131782.html

@harrthom7328 10 жыл бұрын

ArmorAsylum Thank you so much

@kyleaclaro2579 2 жыл бұрын

how to download file i cant

@ewodojaenbaptiste674 5 жыл бұрын

Ou es que elle trouve ce genre de tissu

@mikenguyen2976 10 жыл бұрын

Can i use eva foam

@armorasylum731 10 жыл бұрын

Probably. Why not. Some have even successfully used cardboard.

@gwidao123 10 жыл бұрын

I've just made mine with EVA foam 6mm thickness! looking great! you have to make some adjustments because of the thickness though.