ARRMA 3S UPGRADES: SHIM YOUR BELLCRANK AND STEERING POSTS | ARRMA 3S
Рет қаралды 13,094
Күн бұрынIn this video, I show how to rid steering slop by adding Tekno TKR 1226 shims to your bellcrank, steering post, drang link and Ackerman arm. This is an effective upgrade to you monster truck or buggy RC car. This is a continuation to another video I made earlier. Also, in this video I provide product numbers, tooling and details on how to perform this upgrade on your 3s Arrma RC car. This upgrade apllies to the Granite, Bigrock,Typhon,Senton and Vorteks.
PLEASE HIT THE LIKE BUTTON👍🏻!
Check out Tyrell’s Channel! / @tyrellcorp2118
#rccar #arrmarc #arrmaupgrades
Buy Tekno Shims: www.teknorc.com/shop/tkr1226-...
Buy Traxxas Rod Ends here: www.zonehobbies.net/products/...
Tools: Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws. www.amazon.ca/dp/B00CP2GGBI/r...
Contact me: philborrelli@hotmail.com
Instagram: / phillyb_rc
Facebook: / phillyb_rc
0:00 Intro
1:55 Parts and Tools
3:19 Disassembly
5:46 Remove Bellcrank
6:12 Add Shims to Steering Posts
8:11 Re-assembly
10:39 Test Steering
@phillybrc 2 жыл бұрын
Watch this next! RID STEERING SLOP | ARRMA 3S kzfaq.info/get/bejne/aMWJpZBoud-WpHk.html
@RCRoads 6 ай бұрын
Great information. The pivot ball alteration look like the biggest challenge. I love how you removed the shock towers as a complete assembly. Super helpful. Thanks bunches ...
@phillybrc 6 ай бұрын
Thanx. That is always my approach. I remove the whole assembly and get it out of the way! Works for me! Appreciate you dude.
@nostayhome 2 жыл бұрын
Thank you for this. It definitely tightened up the steering.
@phillybrc 2 жыл бұрын
SWEET!! Yep, it s a solid, simple mod! Thanx for watchin’
@user-hu7gt2uo3v 2 жыл бұрын
Love this video! As always you have great vids 👍
@phillybrc 2 жыл бұрын
Thanx!! Hope these videos get you through your RC modifications!!
@MattsHobbyWorkshop 2 жыл бұрын
Excellent video, dude!! And man, that thing was hammering over the jump! I'd need a jump 3 times as wide LOL. Great stuff, my friend!💥👊😁
@phillybrc 2 жыл бұрын
Haha, It WASN T possible before this mod! Thanx Matt
@tyrellcorp2118 2 жыл бұрын
You're welcome! Excellent video. Emphasizing checking for binding is an important point. These are the mods that made it possible to hit my ramp with speed as well.
@phillybrc 2 жыл бұрын
Thanx for your help! I can add the link to your channel if you like…i wanted to ask you first.
@tyrellcorp2118 2 жыл бұрын
@@phillybrc Sure, thanks for the mention.
@phillybrc 2 жыл бұрын
@@tyrellcorp2118 Thank you man.
@cgmiller82 2 жыл бұрын
Another great video! Thanks!
@phillybrc 2 жыл бұрын
Hey, Thanx Chris! Thanx for bein’ here man.
@AnttiRC Жыл бұрын
Thanks for the video and the part number. I just did the shimming and it turned out great.
@phillybrc Жыл бұрын
Awesome man, thanx for watchin!
@SoCalCrawlers 11 ай бұрын
Thank you! This video helped me out great!!
@phillybrc 11 ай бұрын
Awesome, thanx for watching
@RCCaveStudios 2 жыл бұрын
always a pleasure to see it break on camera!!!!!!! great action my friend i loved it !!!!!!!
@phillybrc 2 жыл бұрын
Hahaha, it s satisfying isn t it? For you anyway haha. Right on. Thanx brother.
@Lacoastal 2 жыл бұрын
Nice vid and upgrade. I will definitely try this upgrade. Bash on!!
@phillybrc 2 жыл бұрын
Give it a whirl! Very effective! Thanx alot
@torontorc4637 2 жыл бұрын
Nice work man, great Upgrades 👍🏽
@phillybrc 2 жыл бұрын
THANX MAN!!
@g.bjumpsbashing3062 2 жыл бұрын
perfect job mate keep it up bro👌
@phillybrc 2 жыл бұрын
Thanx! Appreciate that!
@SLRC17 2 жыл бұрын
flying car, cool.
@phillybrc 2 жыл бұрын
HAHA!!
@funwitheric7796 2 жыл бұрын
It's all fun and games until we break the shit out of our cars and have to replace parts! No wait, that's part of the fun! Thanks for the video! Excellent content!
@phillybrc 2 жыл бұрын
BINGO. It s all part of it! Thanx for watchin’!
@funwitheric7796 2 жыл бұрын
@@phillybrc no prob. Please consider dropping by my channel if ya have the time. Even if you don't, thanks anyway.
@wescat2 2 жыл бұрын
Another great vid. I know it's been mentioned the commentary over the video is top notch.
@phillybrc 2 жыл бұрын
Mention all you like! HAHA. Thanx, gives me a chance to think of what id like to say and stumble a little less on my words…hoping it sounds natural all the same. Appreciate you bein’ here man.
@wescat2 2 жыл бұрын
@@phillybrc I've read the Hot Racing bell crank is not always a good upgrade. Some like it and some don't.
@phillybrc 2 жыл бұрын
@@wescat2 Same. I hear it isn t spectacular. This is more effective. Thanx !
@davidtruelove5022 Жыл бұрын
Thanks
@phillybrc Жыл бұрын
You re welcome! Thanx to you
@forzahorizon5_xpert_1 2 жыл бұрын
you have good channel. big like from Xpert
@phillybrc 2 жыл бұрын
THANX XPERT!!
@captainjaxx3728 2 жыл бұрын
Great video,,,, as always great explanation!!!…. Could I add these to my senton?
@phillybrc 2 жыл бұрын
Sorry I missed this man!!! Yes! You can. Thanx for watching.
@bubblesrcshed 2 жыл бұрын
I may have too try this trick as I’m trying to upgrade the servo on my granite v3
@phillybrc 2 жыл бұрын
Give it a shot! I can see an improvement. Thanx
@Rorona550 2 жыл бұрын
Anyone that owns a 3s arrma should be subbed
@phillybrc 2 жыл бұрын
That s truly a huge compliment, THANK YOU! Share the link with your RC crew perhaps. Thanx for the support.👍🏻
@LutherBuilds 2 жыл бұрын
Awesome video! I'm currently tuning up my Typhon 3s and this is just what I need to do. What do you think about replacing the plastic bell crank with an aluminum one from gpm or hot racing?
@phillybrc 2 жыл бұрын
Ya, I ve only heard good things about the hot racing bellcrank. Stay away form the hot racing servo saver though lol. Let me know how this mod works for you. I m still using it. Thanx for watching!
@fullthrottlerc4727 2 жыл бұрын
Man that was a nasty crash! Poor typhon! I’m still gonna get one! That might be my next arrma!
@phillybrc 2 жыл бұрын
No regrets! It s an animal!! You should do it. Thanx.
@vapeapetn 2 жыл бұрын
@@phillybrc Feel like all I do is spend money, upgrading, and fixing. If had to do over, been better off had went with Typhon 6S
@phillybrc 2 жыл бұрын
@@vapeapetn You could be right, they are very tough machines that are very well built. I d love to drive one.
@jacquesmrtaper7776 2 жыл бұрын
Lol that's one of my favorite local spots to take my typhon out, what are the odds of that haha
@phillybrc 2 жыл бұрын
No kidding! We can have a bash sometime.
@phillybrc 2 жыл бұрын
philborrelli@hotmail.com
@peterfryer6915 2 жыл бұрын
We should call that spot the rice rd rocket pocket!
@phillybrc 2 жыл бұрын
@@peterfryer6915 LOVE IT! I’m in! Except I hear it won’be there long….new housing perhaps. They bash it before it happens!
@peterfryer6915 2 жыл бұрын
I rip my Senton in that spot! Lots of gravel sneaks into my steering but my buddies typhon takes the stones like a champ.
@phillybrc 2 жыл бұрын
Dude, it s almost not any fun with my Granite! Stones are relentless. We ll have to hook up there sometime, I m usually with my kids…philborrelli@hotmail.com
@peterfryer6915 2 жыл бұрын
Ya we tried cutting up a sponge to plug the spots the stones get in but the sponge was putting resistance on my steering mechanisms and fried my servo
@phillybrc 2 жыл бұрын
@@peterfryer6915 I saw a video showing that…i was skeptical. Good to see for yourself though.
@qvo3426 2 жыл бұрын
Daaaang Philly, you should try the diff driver mod. Your typhon would definitely benefit from it. Lol
@phillybrc 2 жыл бұрын
Diff driver mod??…As in, get a differnt driver of the car? Lol
@qvo3426 2 жыл бұрын
@@phillybrc diff driver for the car......you could be the camera guy lol. J/k bro. Thanks for sharing. Im gonna subscribe to your channel now. Thanks again Bud.
@phillybrc 2 жыл бұрын
@@qvo3426 BAHAHAHAHAHA, awesome. Im a crumby driver, I know…I ‘d appreciate the SUB! 👍🏻
@SpeedSyko 2 жыл бұрын
Omg! Great video! I have so many cars I’ve had to trial and error create fixes. I modified my 3 s line as well. I did almost the identical fix. Used traxxas ends with metal traxxas pivot balls. I’m shocked Arrma put any car out with that much slop. Plastic pivot balls is a joke! 👍💯
@phillybrc 2 жыл бұрын
Nice!! They are a joke Syko. I find this mid helps alot!! Appreciate you Syko.
@SpeedSyko 2 жыл бұрын
@@phillybrc Absolutely! Your like me, make it right. No matter what you gotta do! Very good video for that car. Besides your tricks, a lot of first time rc owners get the 3s line. It will be very informative! 👍
@phillybrc 2 жыл бұрын
@@SpeedSyko That s what I m goin for! Thanx Syko
@SpeedSyko 2 жыл бұрын
@@phillybrc 👊🏆💯
@philthyco1 2 жыл бұрын
Very good info..I shim my Tamiya buggies
@philthyco1 2 жыл бұрын
On my older blue senton I took off the servo saver for a solid servo arm.. it helped a lot..I plan on doing the same on my red senton and big rock and adding shims where needed along with the metal c hubs
@phillybrc 2 жыл бұрын
@@philthyco1 Oh really? I ve been curious as to how a servo horn would make difference. But how do servos hold up to bashing without a saver?
@philthyco1 2 жыл бұрын
@@phillybrc Steering feel is more direct..Held up fine for me but I don't send it big lol
@phillybrc 2 жыл бұрын
@@philthyco1 I hear ya, i m lookin to go big! HAHA. I will try it one day when i get some time. Thanx dude.
@philthyco1 2 жыл бұрын
@@phillybrc Yea I jump 15-25 feet ..Im talking about rc dude 81 and Rich Duperbash big though lol
@dannynunez6298 2 жыл бұрын
I put a Hot Racing one I read good things about it but u think I can shims on that? It’s a aluminum one..
@phillybrc 2 жыл бұрын
I heard they re pretty good but I’m cheap. There is likley still room for improvement, you can try to add shims there as well.
@43rocket 10 ай бұрын
hi Phil what brand of 17mm offset hexes you reccomend for typhon 3s? dont want to much offset. some of the grp tires onroad can sit real close to hubs!
@phillybrc 10 ай бұрын
HI! Honestly i think they are quite similar to each other. For the money, I think the Hot Racing make good sense. If they were for bashing and you had extra money, I would go with M2C. Thanks for watchin!
@43rocket 10 ай бұрын
@@phillybrc how much extra offset do the hot racing hexes give compared to stalk?
@phillybrc 10 ай бұрын
You can get different sizes , I believe most common size is 5mm on each side.
@43rocket 11 ай бұрын
does this help for reverse driving to because these 3s arrmas sure wobble in reverse.
@phillybrc 11 ай бұрын
No it doesn t help. Do you drive in reverse for long periods of time?
@user-hp9bt3pw2o 6 ай бұрын
Hey what bumper did u put on that thing? I hacked a 6s one on mine cuz i couldn't find one for the typhon 3s lol I still need one fory nephew's too tho cuz he's brutal on that thing and the original bumper ( if u wanna call it that ) doesn't do shht. Tia
@phillybrc 6 ай бұрын
The one in this video is a 3s senton bumper, although beefy, it s not durable. I ve since gone to the Granite bumper.
@goreyboggs 2 жыл бұрын
What Driver are you using. I need a new one
@phillybrc 2 жыл бұрын
I use MIP hex bits and hex hand-tools from Amazon. They ve been great, link is in sescription. Thanx
@rubenrios7258 5 ай бұрын
How's it held up after 2 years ?
@phillybrc 5 ай бұрын
Honestly, excellent. Nothing wrong with the plastic bellcrank, for my purposes anyway. Give it a shot, it s cheap! Let me know how uou make out. Thanx
@43rocket 3 ай бұрын
isn t there slop in the steering rods going into the bellcrank that adds to sloppy steering to??
@phillybrc 3 ай бұрын
Yes. Watch Part 1! ARRMA 3S UPGRADES: RID 3s STEERING SLOP WITH TRAXXAS METAL PIVOT BALLS kzfaq.info/get/bejne/aMWJpZBoud-WpHk.html
@43rocket 3 ай бұрын
@@phillybrc my mistake sorry!
@phillybrc 3 ай бұрын
@@43rocket Oh man. no worries. thanx for tuning in!
@christophermaiurro3038 2 жыл бұрын
RIP Typhon lol
@phillybrc 2 жыл бұрын
It was nice while it lasted! Haha
PhillyB_RC
Рет қаралды 11 М.
PhillyB_RC
Рет қаралды 90 М.
Arrma 3S/4S Metal Diffs & CVD Sliders ATF9337 ATF11A01 AR310870 Granite/Senton/Typhon/Kraton/Outcast
continuecrushingrc
Рет қаралды 40 М.
PhillyB_RC
Рет қаралды 74 М.
Pete Wylie RC
Рет қаралды 84 М.
Black_АРБУЗНЫЙ
Рет қаралды 3,8 МЛН