Great video Pete. You are great at helping people get the most out of their kits by sharing useful information 👍🏼.
@PeteWylieRC3 жыл бұрын
Hiya. Well these Arrma how to videos have been popular so I thought it would be worth trying to cram a load of top tips into a video about this one. Many thanks for watching my friend. Hope all is well with you 😃
@jptothetree3 жыл бұрын
Seriously, this is one of the best RC maintenance videos I've ever seen! Good lighting, shots are in focus, your tips are super helpful and your delivery is concise and to the point. Thank you! Subscribed.
@PeteWylieRC3 жыл бұрын
Hey that's great feedback which is very much appreciated. Thanks for the sub also. I did try to put as many tips as I could into this one without going on too long. The Senton videos go into more depth as I was saying. Many thanks again 😁
@3DMOFO20202 жыл бұрын
9:22 Yep I did that already😁😁 Wonderful job on the very insightful and helpful video Pete👍👍
@PeteWylieRC2 жыл бұрын
Many thanks for giving it a look 😁
@Mick_Au7 ай бұрын
Hey Pete thank you so much for making this video very clear and well explained can see everything clearly. I just got a new Granite so I’m going to do everything you said before taking it out for the first time. Also going to reinforce the body first time doing it also 🙂 Cheers 👍🇦🇺🇦🇺🇦🇺
@PeteWylieRC7 ай бұрын
Hi there. Ah it's good to know that the video was helpful. Yes I would definitely put extra plastic under the body where the shock towers will hit and also around the body holes. Also the shock tower braces are a good idea if you are doing jumps. Many thanks for your great feedback. Hope you enjoy the truck 😁👍
@Mick_Au7 ай бұрын
@@PeteWylieRC Thanks Pete 😊👊
@Caspa36892 жыл бұрын
If you put thread lock at the bottom of the screw it will coat the whole shaft. No need to ever put thread lock past middle of threads. Just a tip for some.
@PeteWylieRC2 жыл бұрын
Many thanks indeed 😁
@islandrc-duke19723 жыл бұрын
cool rc,review and information
@PeteWylieRC3 жыл бұрын
Many thanks indeed. Much appreciated :-)
@PeteWylieRC3 жыл бұрын
These are the Senton videos with more details - Senton Unboxing kzfaq.info/get/bejne/jdWjqsWG0N3ae6c.html Senton Review kzfaq.info/get/bejne/bL-eobKfv7CRk6M.html Senton Maintenance kzfaq.info/get/bejne/nNqJiZuElr7LXac.html Senton Bash and Chat kzfaq.info/get/bejne/aaedjbRlvKnFlZ8.html Big Bore Shocks kzfaq.info/get/bejne/jp-pfrR9073WkWg.html Senton Updates kzfaq.info/get/bejne/odNgmrtonri-eWQ.html Slipper Clutch kzfaq.info/get/bejne/jK-Kna-r25nOimg.html Senton Inner Fenders kzfaq.info/get/bejne/aLCkZtNjmazMf5s.html
@dinglebarrybonds4 ай бұрын
well done! I just got a big rock and I am saving this video
@PeteWylieRC4 ай бұрын
Ah cool it's a great truck. Mine's still going strong. Many thanks for watching 😁👍
@JoshA863 жыл бұрын
Nice job, I've been considering buying up the parts to convert my Senton to a Big Rock for the winter months. Though I'd rather just buy a whole new one lol. Keep up the content, looking forward to seeing the comparison video 👍
@PeteWylieRC3 жыл бұрын
Yeah it is fairly expensive to get the body, side guards and wheels but cheaper than a whole new RC obviously. Many thanks for your great feedback. Yes I need to get on with comparing them now! :-)
@adamsimonow3 жыл бұрын
Fantastic video. Awesome tips. I'm about to pull the trigger and buy a Big Rock after being out of RC for about 15 years. My previous attempt was with a HPI MT2 18SS, a nitro vehicle that I only managed to run a handful of times as I found nitro more painful than fun. So anyway, thanks for the insights, much appreciated. Subscribed. 🙂
@PeteWylieRC3 жыл бұрын
Hi there. Thanks for the great feedback. I would say that these are a great choice for getting back to the hobby. You do need to check the bits I mentioned but beyond that it should be reliable. Personally I'd go for the Granite if I was only allowed 1 of these but as I'm not I have all except the Vorteks. They all have something to offer but I just like the madcap fun of the Granite. The Big Rock is a bit more stable so it depends what you want. Have fun :-)
@PhilipCockram Жыл бұрын
Great work on this video .
@PeteWylieRC Жыл бұрын
Many thanks for your kind comments 😃
@PhilipCockram Жыл бұрын
@@PeteWylieRC You're welcome . I just got one and I found the video helpful on things to look out for. I've been doing RC for a long time but this is my first Arrma . So far I'm impressed and it's good to see them trying some different things to evolve hobby .
@RallyandTrail3 жыл бұрын
Great video mate 👍 Top tips 👊😎
@PeteWylieRC3 жыл бұрын
Many thanks indeed mate :-)
@NordicRC3 жыл бұрын
Nice, Pete! I misser out on this and actually thought the Big Rock you where talking about was your Senton with the Big Rock body. Amazing you got all of them now. Looking forward to the comparison and the reveal of your favorite. I badly want this one. But trying to shake of the temptation 😅
@NordicRC3 жыл бұрын
Putting thread lock on the washers? Will it not interact with that red plastic they are seated on?
@PeteWylieRC3 жыл бұрын
Hi Mikael. Yes in the end I decided to put the Senton back to how it was and the get the Big Rock to complete the set. Trouble is that then they released the 3s Vorteks! Probably give that one a miss as they have hiked the price up. Anyway the Big Rock is an epic bit of kit and highly recommend when you find yourself with a bit of spare cash. Probably the best all rounder from the range. The red motor plate is metal. I'm not sure what is used for the red finish but it's like the blue on the Tamiya hop up's. Anodised I think. Anyway it's fine with threadlock. Cheers for you comments matey. Best wishes to you 😁
@NordicRC3 жыл бұрын
@@PeteWylieRC Ahh, it’s metal 🙃🙂 Uhh. Yeah, had planned to get this one but the RC spring budget went to Tamiya hop-ups, motors and paint and all that stuff. Uhh, and a new DT-01.
@thomasglover38342 жыл бұрын
This video was so insightful and detailed yet to the point im continuously thinking dam this guy good at this shit
@PeteWylieRC2 жыл бұрын
Hi there. Many thanks for your great feedback. Very much appreciated 😁
@soma_rc3 жыл бұрын
Yes this pivot ball upgrade is a must! Should come with those by default.
@PeteWylieRC3 жыл бұрын
Yes it would be nice if they gave us those as standard. Many thanks for watching 😀
@JF-RC3 жыл бұрын
Hi Pete, hope you're keeping well, that was another informative video and unboxing of tbe mean looking black big rock. Your previous video tips have certainly helped my son and I enjoy our first runs of our Typhon Mega's, so a thank you from me. We had fun with our Arrma's and I am certainly hooked on them. Great RC's. We had no issues with our Typhons, they run really well. As you may remember I am still learning the steering wheel radio, but if I was able to perform one handed operation of the car and film with my iPhone in the other, great fun! We will probably be looking to start upgrading them and making them a bit quicker. But I must say, not at disappointed with the Arrma, great RC! Thanks for your hints and tips 😉 🙂
@PeteWylieRC3 жыл бұрын
Hiya John. Glad to hear that you've been out with the Typhons. It is good to have RC's that are a bit stronger than the Tamiyas so you can bash them around a bit. As a 3s it's an absolute beast. Be quick enough with brushless and 2s to be honest. I believe the Mega has the same gears as the 3s doesn't it? Anyway, have fun. Many thanks for your great feedback. Much appreciated. Cheers for now my friend 😁
@JF-RC3 жыл бұрын
@@PeteWylieRC Hi Pete, i think you're right, the V3 Mega's have the gears of the 3s versions, my son and I will be upgrading for sure. I am looking at purchasing some LiPo's, then upgrading the speed controllers and motors. Researching LiPo's is doing my head in! Any recommendations? Take care my friend 😉
@kjetilpedersen583Ай бұрын
Thanks 🙏 for sharing this video.My first ARMA is the Big Rock 3s BLX Its Amazing to drive and for bashing.Thank for info,some problem with the Spur slipper.So now i going to do the same thing to my car.I order New Opgrded metal Spur.Maybe it will be better.Befor the spur/Slipper don't want to hold together.The skrew is getting skrew off and the car wont spin the weels.So going to take the new part and try it out.😊Soo hope everything is going good Now.Thanks for relly god video.😊
@PeteWylieRCАй бұрын
Hi there. If you are getting the metal spur gear then I think you need an extra slipper pad. My 4s has got two pads on each side from what I can remember. Thanks for watching the video and your kind feedback 😁👍
@parkecorepersonaltrainingp26012 жыл бұрын
Excellent vid very helpful 👍👍
@PeteWylieRC2 жыл бұрын
Glad you found it helpful. Many thanks for watching and your kind comments 😀
@GyuHobbyRC3 жыл бұрын
Nice review.😄👍😄 Thank you for sharing a great video. Have a good day. 💪😀💪
@PeteWylieRC3 жыл бұрын
Many thanks indeed. You have a great day too 😁
@jayc21083 жыл бұрын
Nice video Pete love a bit of big rock😎
@PeteWylieRC3 жыл бұрын
Yeah I'm loving it so far. Many thanks for watching 😀
@gabrieljeavons87733 жыл бұрын
💙💙
@PeteWylieRC3 жыл бұрын
Thanks for watching :-)
@rcreviews98943 жыл бұрын
Nice! You got one👍 it’s a great truck very durable, I really enjoy mine
@PeteWylieRC3 жыл бұрын
Yeah I had to complete my collection. I thing that the Big Rock might be the best all rounder but need to do more testing. Many thanks for watching :-)
@rcreviews98943 жыл бұрын
@@PeteWylieRC yeah I just got a Typhon I’m loving it! Now I got my sights set on the senton to complete my 3s collection, the big rock is a really tuff truck, I’ve done a lot of ramp jumps with it on my channel and had some pretty hard tumbles, the only thing I’ve broken is the rear turnbuckle trying to do a front flip lol, one thing you may notice is that even though the BigRock is wider and slightly longer than the granite, it does traction roll easier, I think it’s because of the thinner tires and when driving they balloon out making them even thinner so I might try the granite tires on it and see how that goes! Good video and congrats on the new ride👍
@robcraighill63153 жыл бұрын
Can of punk and some RC, my favourite combo too 😉
@PeteWylieRC3 жыл бұрын
Haha, best not to drive them drunk though 😁
@apexstudio46573 жыл бұрын
Nice unboxing video bro !⭐🧡
@PeteWylieRC3 жыл бұрын
Many thanks indeed, much appreciated 😁
@paulosrcs1852 жыл бұрын
Nice vid liked and subscribed 👍
@PeteWylieRC2 жыл бұрын
Many thanks indeed for your great feedback 😁
@catcancrunch72603 жыл бұрын
Good call ! I’d be interested in your opinion on the best one as next month I will purchase the typhon or maybe the big rock??????? Great upload thanks 🙏
@PeteWylieRC3 жыл бұрын
Ooh I don't know which to suggest currently but I don't think you'd be disappointed with either. I think that the Senton will come out bottom although it's still good. The others are just better! I'll try and test drive some more soon. Many thanks for your support. Much appreciated 😁
@mygt8a4re3 жыл бұрын
Great video, so helpful, thank you! Just sub'd 👍
@PeteWylieRC3 жыл бұрын
Many thanks for your feedback and the sub. Much appreciated 😁
@markmerrin16063 жыл бұрын
Pete, the switch on the pistol grip is for the throw on your steering servo.. KZfaq can answer that for you.. now can you help me?.. can I run high melting point grease in my front and rear diffs on my granite, or do I need silicone oil. I cannot find the standard viscosity.
@PeteWylieRC3 жыл бұрын
Ah right. I should have looked! Anyway I've only tried silicone oil on these. I think that they come with 10000cst. I used 20000cst because it's what I had. Can't see a problem with using grease because the Tamiya kits do. Don't think that it gives the limited slip effect that the thick oil does though. If you look for Core RC silicone oil on eBay you should find it. Many thanks for your feedback. Much appreciated 😁
@markmerrin16063 жыл бұрын
@@PeteWylieRC your welcome mate... good job 👍🇬🇧😎
@chowettgoes3 жыл бұрын
You really are into the 3s range! Would be great to see comparison videos of them all. It’s pretty rare to have them all (your special Pete 🤣). I was going get a big rock but have gone big and plumped for a 6s Outcast/Notorious - hope I can handle it 🤪
@PeteWylieRC3 жыл бұрын
Oh wow the 6s! These 3s seem plenty fast enough for me. I don't know what the 6s is like although I did drive my friends 8s Xmaxx which was a bit of a beast. Bit scary really! Hope you enjoy it. Many thanks for your great comments. Much appreciated 😁
@chowettgoes3 жыл бұрын
@@PeteWylieRC I will be using the 50 / 75% switch on the remote 🤣
@PeteWylieRC3 жыл бұрын
@@chowettgoes yeah, good call. Don't go all Kevin Talbot and drive it full speed into a wall to see what happens!
@chowettgoes3 жыл бұрын
@@PeteWylieRC I can’t afford to get up Tallbot antics, he’s more entertaining than me! I tell what persuaded me to go 6s platform rather 3s. It’s not the speed as mine is a short wheelbase stunt truck, similar to difference between Granite and Big Rock (Notorious / Kraton). Similar speed to your Typhon I think. I love the look of the honeycomb plastic chassis on the 3s line. But I fell in love with the Outcast styling and the V5 has the latest electronics to boot. Great shocks, aluminium hop ups and the dBoot tires and wheels are just epic. I’m saying all this and I haven’t even driven one yet! Arriving from Italy this week (second hand). I love comparing the platforms. Be interesting to see how the metal chassis feels compared to plastic (one day) - keep up the great content 👏
@someoneyoudontknow32572 жыл бұрын
After 50 packs through the Granite 3s v3 (short wheelbase Big Rock) if you intend to run it primarily on 3s you will eventually need: Cvds for at least the rear and probably the front too I used the arrma ones. Metal crown and input gears for the rear diff. Or the hot racing ones but I think they're overkill and more than twice as much. And the slipper maintenance kit's brass nut and longer screw. Without these upgrades you will pop driveshafts at least in the rear eventually. (I've popped front and back trying to reign the slipper in) The slipper will wear in and start backing out even with blue threadlock and the rear diff will fail from getting the majority of wear due to the lifting front end. Shocks are another weak spot but optional as the shock rod ends pop out but you can glue those back in and with a couple spares you'll get through bag of batteries no problem. Or you can get some better shocks like the ones in this vid, the typhon 6s or zd shocks. The arms and turnbuckles are solid. The chassis and towers might be plastic but they are tough as nails I've never broken any of those doing full sends up a quarter pipe.
@PeteWylieRC2 жыл бұрын
Thanks for all the info. I've not actually broken the drive shafts in any of my Arrma 3s cars yet. I've worn out the spur gears a couple of times but they last ages. Thanks again
@someoneyoudontknow32572 жыл бұрын
@@PeteWylieRC It's a great little truck. After a 10+ year break from the hobby it's been a blast getting back into it with this terror on wheels. Next car is gonna be the outcast. Hoping for the 4s but it's not looking to be. I really like the 3s line because they are straight up beasts on 3s and the parts are cheap enough to experiment and everything is so interchangeable with the entire 3s and 4s lines being the same platform. I ran my granite as a 3s Typhon/ Outcast hybrid for a while.. till I clipped a phone pole mid jump on blast and landed on a corner in the pavement from 20 ft up 🤣😭. Typhon arms are longer so that extra leverage made the difference vs the stubby, borderline indestructible granite arms. I put 12 tooth pinion on the stock motor and she had plenty of power on 3s even with backflips on there. Just had to watch the temps doing speed runs in grass. She's all stock width and wheel size again now and I'm just enjoying the truck for what it is. Thanks for the vids. You guys that take the time to get this content out there really help alot.
@MarkBryanRC3 жыл бұрын
Top video, top tips, Pete! I really like the way this truck fits together, some cool design features, you can see they really thought about how to make an RC basher. But as everything, improvements can be made - so well done in thinking of those improvements and showing folks how to do them! Very nicely presented and explained. Hope all is well with you and yours, take care, matey! :O)
@PeteWylieRC3 жыл бұрын
Hiya matey. Yeah I thought it was worth going over the bits and bobs all in one video. These are great RC's. So are you still on hols or has that finished now? I can't remember when they started. Anyway, hope you are having a nice rest of you are off. Many thanks for watching my friend. Cheers for now 😁
@crowtubecrozier28574 ай бұрын
The 3rd channel A,B are for a light kit. IM interested in that myself.
@PeteWylieRC4 ай бұрын
Ah right you are. Many thanks for the info and thanks for watching 😁👍
@smarthandsomeguy3 жыл бұрын
That „other channel“ is for adjusting the servo endpoints.
@PeteWylieRC3 жыл бұрын
Oh yes I'd been meaning to look that up. Many thanks for the info.
@wakkogn93513 жыл бұрын
Great video! What do you think about the dirt escape hole that some folks add under the gear?
@PeteWylieRC3 жыл бұрын
Well I'm dubious because apart from falling out, the dirt can go in there as the chassis scuffs along the ground. It's probably ok if the dust is perfectly dry and doesn't stick to the gears. I has a Traxxas Slash 2wd and the spur gear cover had a hole at the bottom to supposedly let out the dirt. Well it got endlessly clogged up until I got an RPM one with no hole and then it was fine. Personally I think it's best to try and stop anything going in there in the first place 😁
@cscape19733 жыл бұрын
For a Ready to run it’s not very ready to run is it 🤣🤣 the building and painting is half the fun for me.
@PeteWylieRC3 жыл бұрын
Ha, yeah you are spot on. I wish that Arrma and others would get into producing kits but 'RTR' seems to be what everyone is doing. Daft really for a hobby where you will certainly need to get the car apart at some stage to mend and maintain it. These are fairly ready to run to be fair but worth checking that they've done it right. Many thanks for your great feedback 😁
@cscape19733 жыл бұрын
@@PeteWylieRC you are not wrong, even I have just bought a RTR......a WPL D12, cos you can’t really be an RC car geek if you don’t have one right 🤣🤣
@PeteWylieRC3 жыл бұрын
@@cscape1973 Oh yeah I need to get one so I can join the gang :-)
@ezlivin1454 Жыл бұрын
Is there a special hobby grade loctite? Ive used blue loctite in the past and it’s eaten through plastic.
@PeteWylieRC Жыл бұрын
Hi there. Never use any kind of threadlock where it will touch plastic as it will eat it as you say. For metal into plastic I tend to use super glue if it's one that might shake free. Thanks for watching 😁👍
@Victic0052 жыл бұрын
Probably better to get the Kraton 4S. But I bought the Notorious 6S for only $10 more then converted to the Kraton 6S with the parts that I had.
@PeteWylieRC2 жыл бұрын
Hi there. Yeah the new 4s versions have a load of great upgrades which makes them better value on the face of it. Sounds like you got a good deal. Many thanks for your comments :-)
@Victic0052 жыл бұрын
@@PeteWylieRC the 4S versions have been improved, but they are priced too close to the 6s counterparts. They're only $80 difference at normal pricing. When the 6s are on sale, they are great buy.
@PeteWylieRC2 жыл бұрын
@@Victic005 worth knowing, thanks 😃
@unclebob84193 жыл бұрын
Good video. Arrma have released another one to add to your collection. With my big rock the throttle will sometimes cut off before the battery is low, usually after landing jumps, do you know why this happens? I don't think it's the low voltage lipo cut off, it can happen a few minutes into a new battery pack
@PeteWylieRC3 жыл бұрын
Oh yeah I saw the new one yesterday. Don't know if I can justify buying a new one just yet. Also they have hiked the price up compared to the other 3s cars. Not sure about your issue. Sounds more like a battery connection issue. Are the plugs and soldering ok?
@unclebob84193 жыл бұрын
@@PeteWylieRC I am using spektrum batteries with an IC5 plug. It could be a problem with my ESC.
@PeteWylieRC3 жыл бұрын
Ah right. Not something I know about I'm afraid. Good luck getting to the bottom of it.
@MightyistheRCGamer2 жыл бұрын
How's it running today?
@PeteWylieRC2 жыл бұрын
Hi there. Yeah all good thanks. I tend to run it with a set of Granite tyres I have but other than that I don't think I've had to change anything. Many thanks for your comment.
@zoranmihalic49002 жыл бұрын
Zasto tolko ljepila nije potrebno
@PeteWylieRC2 жыл бұрын
I find that certain screws can shake loose and the glue keeps them tight. Thanks for your feedback.
@ScottyBGaming2392 жыл бұрын
I just think it's absolutely ridiculous that you have to "fix" it before you even run it. technically you don't have to do any of this but there's a reason people do before their first run. $500 for the truck, battery and charger and yet you still have to PMCS (preventive maintenance checks and services) the fucking thing...
@PeteWylieRC2 жыл бұрын
Hi there. Yeah I agree that if it's RTR then you should be confident that it's good to go really. I wish that more manufacturers made kit versions of their RC's so you could build it right in the first place. Many thanks for your feedback. Much appreciated 😁