Thanks so much!😎👊

Thanks so much brother!!👊Yeah the little Granite was a total handful! A lot of action off the vid to keep it short but no breaks and the drive train held up! She is pretty weighted with all the bigger electronics and the 4s pack. The body is SUPER reinforced and has an aluminum bar for support!😂 so that adds to it! The 50 weight shock oil and weight kept her smooth on the bumps and landings! The Senton was trippin me out! It's a whole different animal! Definitely needs some buggy tires or something but I'll keep going till those blow off!😜Looking forward to the M2C Talion chassis! She's patiently waiting!!💪👊🤘🤘

Thanks bro!👊I was long overdue a bash!! Yeah these Powerhobby packs have been great to me. Hope to you as well!👊👊🤘

Thanks so much bro!😎👊It was a blast! And thanks for subbing!👊🤙

Thanks so much bro!!😎👊👊👍🤘

Thanks bro! I'm pretty happy how it turned out!👊💪💪🤙

@@RCDUDE81 beast mode 100%

Please dont destroy the Senton with 2.8s or so brother..maybe buggy tires, 😋

Thanks so much brother Thomas!! Don't worry..I plan on keeping her a true SENTON!! maybe some Duratrax lockups?👊😎

Thanks bro!👊 Yeah it held up very well! I could have done standing backflips with the torque! I've beat down on all my 3s trucks pretty hard and never broke a driveshaft..🤔Sorry to hear you had bad luck with them! 😱

🤣Yeah it's a tank!! It will fly but its tricky! The body wants to float her around like a parachute so you gotta hit the jump straight on and hold the throttle to keep from nose diving. The 20 tooth pinion helped too! 😁👊🤘🤘🍻

Thanks so much!!👊She did a great job! And nothing broke!!😁😁Yeah hopefully soon we'll hit 1K! More people seeing these Arrmas the better!😎💪🤘🤘

Ouin avec 1 pied de glace on the top 😜...

Thanks bro!!😎💪🤟🤟

Thanks MrMad!👊Yeah dude the drivetrain seemed to hold up good! We'll see on the coming runs! It is a little animal!😅The Senton is just a big heavy goofy tank! Lol it was a blast to drive though!👊

@@RCDUDE81 them boyz beating me up on my 77mph run...lol check out comments...

🤣🤣That funny! Its tearing them up! I trust you bro. All stock with bigger pinion. It's all about a good battery, good long pass and knowledge!🤘🤘

Yeah so far no leaks. I really made sure to snug them down when I changed the oil. I'll keep an eye out though! Thanks for the heads up!😎👊

Thanks Aaron!👊Yeah the Granite was a total handful. There was a lot of action not in the vid just trying to keep it short. It really takes crazy throttle control to land her right! Had me on the edge the whole time! I like the challenge! I'll definitely try it on 3s. You're probably right about a larger pinion. The Senton is a beast! I was really surprised how it jumped! All the vids I've seen it crashes and burns every time!😅😂💪👊👊🤘

Might need a driveshaft bearing support and metal diff cases now lol

🤣Thanks bro! I'm not sure on the front bumpers but the wheelie bar is new. Performs well and is super tough!! I was pleased at how the stock drivetrain held up!💪💪👊🤘🤘

@@RCDUDE81 Does that bumper cover the front hing pin brace completely?

It does yes. The rear bumper I have on my Big Rock doesn't. Hopefully they'll send out the new bumpers with the full brace like the new wheelie bar.

@@RCDUDE81 I hope so too..I'm waiting for the new version to buy a few sets

Yes it really helps!! Especially the 3s line trucks! They've taken quite the beatings on hard pack too. I really love this spot..Just sucks it will soon be under construction. I use it while I can!!👊👊💪🤘😎

Yeah I'm loving this little Senton tank! The stock tires do suck though! I'm just going to blow them off the rims then get new ones!😅💪💪🤘

Is it actually the Big Rock 3S wheelie bar as per the below link? tboneracing.net/products/10096-tbr-wheelie-bar-arrma-big-rock-3s

I don't own a 3s Senton but a Granite will probably be a better all around basher and great for backflips and stunts. The Senton looks hella fun too for what it is. Just depends on what your bashing style and habits are!😎👊🤘🤘

Well these are the 2.8 Trenchers with a 17mm hex. All wheels are the same. If you do the 17mm hex conversion these will work perfect!😎👊 www.towerhobbies.com/cgi-bin/wti0001p?&I=PROC0329&P=FR&gclid=Cj0KCQjwwODlBRDuARIsAMy_28VAaJNHw2exo9jy0aJ7FxrY1D0uZpA5AJ9u1OuaNXBhkXUdwfXLWK4aAnz6EALw_wcB

Thanks bro!👊I did on that one noser landing. It was partly on there from where my buddy had cut it to flip it upside down for drag racing. It was barely hanging on anyway!😅I have a new one on the way!😎👊🤘🤘

🤣Probably not good! Its got all the power now you can possibly put to the ground! Still VERY touchy but love it!😎💪💪👊🤘

Thanks! The motor should do great with 3s just may need to gear up a little since it's 2650 kv. It's a little more torquey than the stock. More bottom end for sure! It's a tight fit though, getting past the receiver box is a little tricky.😎👊💪🤘🤘

@@RCDUDE81 I'm thinking 20t?

@@deezo5617 I was running a 20 with 4s. No heat issues. I'd say at least 20 but 23 or 26 would give you a little more speed on 3s.

@@RCDUDE81 ok thanks bro I'll try both 23 and 26 when the motor comes thanks again

@@RCDUDE81 I'm having trouble finding that motor but came across a hobbystar 3665 2600kv do you think that will work?

🤣Thanks Stevo! "Ramp it up!!"😎💪🤘🤘

It did great! almost TOO much power! I charged a 3s pack to bring as well but forgot to bring it!😜

Typhon 6s shocks work nice! Just need to lighten the shock fluid to 30 or 35. And adjust spring rate to your liking. Some fuel tubing makes a nice grommet for the cap! 👊

Thanks for responding back your awesome...

Thanks bro!👊🤘

Does the big rock wheelie bar fit the granite?

Yes the wheelie bar is listed under the Big Rock on T-bone's website. Direct fit!

The Hex8 and 1730kv is a sick combo! Just be careful of gearing. Anything over 20 tooth pinion will overheat pretty quick. 18 tooth works well for me. I know Rich runs the 1480 with a Hex6. It is a big heavy ESC but it's totally up to you. Personally I think the 1730 and Hex8 is a good combo with loads of torque and speed!😎💪👊

RC DUDE81 Thanks dude. What you say goes! Im getting that combo. You rule its that simple 🤘🏻💯🤘🏻

Running all stock diffs and spur. Just a motor mount and pinion change!👊

Nice

It held up just fine!🤙