Arrma Gorgon - Upgrades a wheelie bar and 3D printed parts

No video

Arrma Gorgon - Upgrades a wheelie bar and 3D printed parts

Рет қаралды 1,216

Күн бұрын

The Gorgon needed a wheelie bar as on a hard surface it can scrap the rear of the body. I also made tubes for the suspension, this gives more spare adjustment clips. I then design sliders for the roof.
This video is for 14 years old and older. These Rc vehicles are dangerous as there are fast moving parts and hot parts that can burn.

Пікірлер: 48

@ShenRC 10 ай бұрын

Very nice! the sliders hopefully will save the body!

@BasBoyRC 10 ай бұрын

Thanks Steve, I just hope they do as I do not think there is more you can do with the body.

@CarolusRex1346 10 ай бұрын

Good upgrades for the Gorgon, espicially the wheeliebar. 👍🙂

@BasBoyRC 10 ай бұрын

It needed the wheelie bar as it does scrap it's back if not carful.

@tomazztivold 7 ай бұрын

Thanks for your brilliant work on 3D print files. And videos are superb

@BasBoyRC 7 ай бұрын

Thank you 🙂

@RCBirds 10 ай бұрын

Great upgrades, looking forward for your next prints

@BasBoyRC 10 ай бұрын

Thanks Dirk, we will see what we can do with making things.

@islandrc-duke1972 10 ай бұрын

great upgrades and cool 3Dprinted stuff

@BasBoyRC 10 ай бұрын

I'm slowly learning more on Cad, the lessons on the Tube are so hard as they go into things I do not need and makes it harder to remember the basics.

@redblue40rc33 26 күн бұрын

For giggles...put the spectrum 3900 kv motor, 120a esc in it and add the hot racing aluminum pivot ball to all joints...shoe goo the body with hot glue beads n drywall tape and protek skid bars on body...dx3 tx for better trim settings.....im on stock gearing...handles just fine..love the gorgon....3900 kv is more peppy...also add the fan... you'll need it...move esc up next set holes to get battery cable out of chassis and add the arrma reciever box...like $12...cheers mate from Arkansas and God bless

@BasBoyRC 26 күн бұрын

Thanks for the information and happy with it being brushed as just right for how I drive it. The body is taped and it has roof rails. Transmitter it's now on my FlySky GT5.

@poppysrcandmodels 9 ай бұрын

Absolutely nice work! 👍😎👍

@BasBoyRC 9 ай бұрын

Thanks, CAD is so hard to get it to work right, but making more than I used to.

@rcplaytime 10 ай бұрын

brilliant upgrades 👍👌 looks great 👍

@BasBoyRC 10 ай бұрын

Thanks 🙂

@UrbanLegendRC 10 ай бұрын

Those roof slidders are going to come in handy. I like how they came out the slight curve was a nice touch to not deform and pull down the body.

@BasBoyRC 10 ай бұрын

The cure was done with a hair dryer, it was easier to print them flat.

@hollyhillrc 10 ай бұрын

The roof sliders are excellent. They look very professional. I especially like the inside fittings. Great work Mal.

@BasBoyRC 10 ай бұрын

Thanks Del, I'm pleased how they came out but still need to workout more how cad works. There are ones on eBay and his design they do looks as good.

@TeamJunkYardDog 10 ай бұрын

Those are sure to help

@BasBoyRC 10 ай бұрын

I hope they do 🙂

@G9RCCar 10 ай бұрын

Looks so good, nice job, man.

@BasBoyRC 10 ай бұрын

Thank you 🙂hope it all works.

@machinedred 9 ай бұрын

Roof skids are great dude nice work ! Can you share the file with me ?

@BasBoyRC 9 ай бұрын

If I can work it out I will put on Thingiverse.

@BasBoyRC 9 ай бұрын

I have just put the files up on Thingiverse, just search Arrma Gorgon.

@cue03 7 ай бұрын

Can you share the file that you used to print the roof rails and the under piece? What material did you use?

@BasBoyRC 7 ай бұрын

The files are on Thingiverse - just look up Arrma Gorgon. I used PLA.

@cue03 7 ай бұрын

@@BasBoyRC awesome thx.

@claytontroutt9340 10 ай бұрын

Wheellie bar is upside down. It's to low that way.

@BasBoyRC 10 ай бұрын

I have noticed since and will flip it.

@jasonobrien569 9 ай бұрын

What size screws did you use to put the roof slides on?

@BasBoyRC 9 ай бұрын

No idea, they were what I found in a screw box.

@jasonobrien569 9 ай бұрын

@@BasBoyRC ok. Thanks. I plan on printing the slides. I just got the Gorgon for my son for Christmas.

@BasBoyRC 9 ай бұрын

@@jasonobrien569 The screw will be the thickness of the two parts, body and the nut.

@timboles9480 6 ай бұрын

Any chance you'd share the roof protector stl files?

@BasBoyRC 6 ай бұрын

They are on "Thingiverse" just look up Arrma Gorgon.

@timboles9480 6 ай бұрын

@@BasBoyRC ty so much, i can't design for crap so this helps alot

@BasBoyRC 6 ай бұрын

@@timboles9480 They are not perfect, but I'm still learning and finding CAD very hard. But I was born in the 60's so never did it at school. Look at videos on the tube, some are better then others to learn from.