Arrma Kraton 6S EXB. At the practice site. with new "Freshpark" ramp
Рет қаралды 188
Күн бұрынand now, a new member of the readeracing RC crowd. "freshpark" Ramp. iv had it a while and used a few small trucks. i think this is the first time sending 6S off the new ramp. it definitely sends it airborne. still need to take it to the park and send some real launches off it.
Kraton EXB 6S is based on a twin chassis setup with M2C rear tower brace, Shock pistons ,standoffs, and drive shafts on all corners. along with coil under springs. Powered by spektrum 160A ESC stock from 1/5 scale 8S Kraton. paired with 1250kv motor. Running only 6S .... 100k Front and Rear, 20m Center diffs.
@boduke9428 2 ай бұрын
Coil under springs? I couldn't really tell what they looked like in the video? Where do those come from?
@readeracingRC 2 ай бұрын
i put the commment in the wrong place, now i see what i did. lol this what i meant. I got them from Amazon. The next set I'll buy will be stiffer strings. Now, mind you I put them on because I launch over 100'. And trying to have less body slap and catch the weight of the car from bottoming out. I thought it was going to be have shitty handling driving it. But as I write this I would almost say it helps the handling. I'm going to pay more attention if what I said was right. Thanks for the question and. Comments. The spring on Amazon was: uxcell Compression Spring - 1.2mm Wire Dia , 18mm OD , 50mm Free Length Spring Steel Extension Spring,Black,20Pcs I'm not sure if it is still the right move. But I haven't had a reason to remove them... Have fun.
@boduke9428 2 ай бұрын
@@readeracingRC gotcha. Thanks. I thought you were referring to an internal spring like are in the shocks on the Redcat Ascent.
L2theW
Рет қаралды 13 М.
Дима Масленников
Рет қаралды 10 МЛН
Readeracing RC
Рет қаралды 282