ArsoftPro CO2 SVD conversion set - 2 GEN

  Рет қаралды 127,913

AirsoftPro.cz

AirsoftPro.cz

11 жыл бұрын

New generation of the CO2 conversion set. Allow to convert spring action airsoft SVD to the most powerfull CO2 version. Common design improoved by Czech company AirsoftPro. Motto: "others only sell, we produce".

Пікірлер: 105
@napoleonbsj
@napoleonbsj 3 жыл бұрын
I was hoping it would turn into semi-automatic haha
@kebabcek
@kebabcek 9 жыл бұрын
Dont use the hammer on the cylinder head. Trust me.
@noodlewater12
@noodlewater12 6 жыл бұрын
yeah i would go with a rubber mallet im cringing as he is samacking that.
@kwannax
@kwannax 5 жыл бұрын
If this guy is in a service technique... I would fired him
@RBOnlineMilsim
@RBOnlineMilsim 8 жыл бұрын
Thank you this will help me upgrade my rifle for my next video!
@facundocorradini
@facundocorradini 11 жыл бұрын
As much as I love AirsoftPro's upgrades, I believe that this -as any gas in bolt design- is not a good idea, as the inherit power inconsistency it's just too much for a sniper rifle. A regulated CO2 source would be much better, as it would provide great consistency and adjustability for field limits. Anyway, keep up innovating!
@sogerc1
@sogerc1 Жыл бұрын
This was true 9 years ago, fortunately nowadays it's much better. I never fielded spring snipers because it's just so inconvenient to operate the bolt and on top of that they don't open up like real bolt actions, fortunately a KJW M700 with minimal upgrades does the job these days. But indeed the first 20ish shots from a CO2 mag are too powerful and the last 20 too weak, nothing you can do about that, except to master green gas mags.
@virusofthedeath
@virusofthedeath 10 жыл бұрын
For me it still has the problem than most CO2 SVD kits has, instability on FPS causing it to be really difficult to adjust hop up and causing the BB to go crazy in the fly. Nonetheless nice kit.
@FakieSandwich
@FakieSandwich 11 жыл бұрын
tuhle zbran mám doma jinak LIKE !
@CottensProductions
@CottensProductions 10 жыл бұрын
hey. awesome vid, I'm not sure if you actually used this much but how many shots would you get with one Co2 cartridge?
@MotoMotoBrain
@MotoMotoBrain 10 жыл бұрын
Will this set work with the Matrix (Bravo) A&K SVD II? Or will it only work with the A&K SVD I models?
@GhostHawk76
@GhostHawk76 7 жыл бұрын
It would be very nice to know the music name also.. Thank you for sharing this helpful video AirsoftProCZ my first webshop and always recommended.
@XCasperChristensenX
@XCasperChristensenX 11 жыл бұрын
do you sell the dragunov with the co2 kit allready installed?
@tinka7546
@tinka7546 8 жыл бұрын
can you do this conversion on a Kings arms spring svd?
@WandaII
@WandaII 8 жыл бұрын
Can I use gen 1 cylinder in gen 2 system? Hence I could faster "repower" my SVD when I could just swap another primed CO2 cylinder inside when removing the other.
@TriloAirsoft
@TriloAirsoft 10 жыл бұрын
Malá otázka, ta rezonance po výstřelu (zní to jako 3 výstřely), má to nějaký vliv na zbran? jestli se opotřebovávají díly kvůli tomu druhá otázka: když dám na zbran tlumič, ovlivní to střelbu? (znám zbraně kterým se totálně rozhodí víření vzduchu při nasazení tlumiče- nestřílí to) poslední otázka: jaké střelivo (váhu) doporučujete po instalici setu?
@TheSrkiman
@TheSrkiman 7 жыл бұрын
hi can you tell me does fit same spring for aeg and this sniper?
@mikemiret3021
@mikemiret3021 10 жыл бұрын
Is there a way to lower the fps to a 500-550 range?
@pavelskorepa9341
@pavelskorepa9341 8 жыл бұрын
Přijde vám humání brát ocelové kladívko na píst a trysku? Nebyla by lepší třeba dřevěná nebo pertinaxová palička?
@MrSpeedydee
@MrSpeedydee 8 жыл бұрын
Ano z toho mi běhal mráz po zádech.
@louismullin6931
@louismullin6931 7 жыл бұрын
Hi, im just wondering if this kit would work for the king arms svd dragunov airsoft sniper, also do you have to have a that blue hop up for the co2 to to work?
@louismullin6931
@louismullin6931 7 жыл бұрын
The answer to this question is yes, the 450 spring works, however, the 800fps spring does not work as well as the other spring, when you pull the bolt back with the 800 fps spring the co2 presses on the bolt and sprays out. So you loose some of the co2. However, that's the only thing wrong with it. I would of like a response before I bought it, but I decided to take the risk. I do not really appreciate the lack of help you guys gave me. You should really think about that.
@user-vh8kl7rd3r
@user-vh8kl7rd3r 6 жыл бұрын
Доборго времяни суток , что хотелось дополнить напрявляющяю возвратной пружины не подходит по резьбе (она просто менше) и зацеп у стоковой СВД алюминь или чтото вроде того стирается об стальной фиксатор так его назову просто за несколько выстрелов стало ощютимо нужно его менять на более крепкий. И постарайтесь при игре не потярять запчясти при замене . Это всего скорей для пострелушек на даче по банкам))))))
@airsoftghillie3370
@airsoftghillie3370 9 жыл бұрын
Where could someone get upgrade parts for the spring A&K SVD ? Also could you do a video on how to upgrade this (Spring)
@chaistan
@chaistan 9 жыл бұрын
It takes any AEG barrel, any AEG spring and any hop-up rubber with very little effort. The CO2 upgrade is super fun, but tends to fuck up accuracy as the fps is sporadic at best. U might wanna upgrade the piston first. Just slap an extra o ring on the basic(cheap) or buy the new from Airsoftpro.
@sirted5888
@sirted5888 7 жыл бұрын
660 is that standard or can someone tell me how to adjust it to do that as I'm a range shooter don't do skirmish too old
@todd.m6996
@todd.m6996 8 жыл бұрын
Can I do this conversion to a king arms svd also?
@BlackCelica
@BlackCelica 10 жыл бұрын
Can anyone answer me this Once you replace the cylinder head to use the CO2, can you use the same one if you wanted to go back to spring or do you need to replace the head again? Cheers
@BlackCelica
@BlackCelica 10 жыл бұрын
I thought as much, just didn't want to cause damage to the gun if I did decide to switch back. Thanks for the help.
@stevenstice6683
@stevenstice6683 3 жыл бұрын
I have a spring-powered S-M8. Is it possible to convert it to CO2? I can live with it still being semi automatic if it can't be made full auto.
@KYIMGMG
@KYIMGMG 3 жыл бұрын
Could you show me how to upgrade gel ball to Airsoft on this SVD
@executionerairsoft8055
@executionerairsoft8055 9 жыл бұрын
Won't this take a long time to take out the co2 once it runs out.
@vasilCL
@vasilCL 8 жыл бұрын
ahoj potrebuju se zeptat pri nekolika vystrelech se mi zacla cast ktera ma v sobe co2 bombicku sama od sebe povolovat da se tomu zabranit??
@philippehamal9952
@philippehamal9952 8 жыл бұрын
will this fit in a asg/ares svd-s ?
@dodoclan555
@dodoclan555 9 жыл бұрын
210 m/s nice item, 10x man
@BillGates2684
@BillGates2684 10 жыл бұрын
S ohledem na fakt, že čím vyšší je hmotnost, tím nižší je rychlost, zajímalo by mně jakou by měla zbraň rychlost při vaze kuliček 0,40g ?_
@TexGaming
@TexGaming 11 жыл бұрын
Must be a pain in the ass to get a new canister in, I mean it can't be hard but its just a long process in the field
@sangjester19832
@sangjester19832 8 жыл бұрын
I have a severe issue with this. I bought the conversion kit, did everything I was supposed to to put it together, everything is in the right spot BUT..... when I put in the co2, the entire canister discharges all at once. Any advice on this? I've already swapped it out once, but the replacement does the exact same thing. I am completely at a loss here, I really want to have a co2 sniper, but I'm getting a little irritated with this issue constantly popping up. I should note that the co2 escapes straight out of the nozzle, not around the threading of the container.
@sangjester19832
@sangjester19832 8 жыл бұрын
+AirsoftProCZ thanks. Sadly you're out of stock and evike (where i bought the kit) doesn't have a thing for it. Kind of sick returning this.
@andreyv1668
@andreyv1668 8 жыл бұрын
sangjester19832 use caliper. Measure diameter properly. Order from Amazon 10 rings for 5 dollars. If internal diameter is not much, use drill to get proper size. In my case it worked.
@BeardedNorthBiker
@BeardedNorthBiker 8 жыл бұрын
+sangjester19832 you "really want to have a co2 sniper" But you don't want to do anything else then buy in at drop it in. Sorry You don't understand how airsoft sniping is. Or the sport what so ever.
@Lorwildrose
@Lorwildrose 7 жыл бұрын
Make me want to get a SVD
@deadmike73
@deadmike73 8 жыл бұрын
im thinking about getting one of these, but i was wondering what kind of m/s or fps would it get using .40 BBs?
@xXAsunaxKiritoXx
@xXAsunaxKiritoXx 7 жыл бұрын
Im guessing high 300's or mid 400's If not... then holy shit lol
@deadmike73
@deadmike73 7 жыл бұрын
Meada Kazuya yea,im getting an M200 spring and and reinforced piston instead.
@DeKeLcz
@DeKeLcz 11 жыл бұрын
Tomuhle říkám tutoriál.
@crazyHatter79
@crazyHatter79 7 жыл бұрын
на сколько выстрелов хватает одного балона?
@Irru27
@Irru27 7 жыл бұрын
so on average 600 fps per shot? Ive been wanting to do this with my SVD but reloading the co2 seemed like a death wish on the field. good thing i didn't do this before bad blood they would have band the use of it XD so I have to ask... how much tension does it take to cock it? Im guessing its been reduced dramatically and two how many shots can you get off before you really loose your effective range (before the co2 runs out i mean?)
@flip720cc
@flip720cc 10 жыл бұрын
nice music
@xXAsunaxKiritoXx
@xXAsunaxKiritoXx 7 жыл бұрын
HOLY CRAP. >4.50 - 5.00 J's Damn thats hot as fuck. Get some metal bbs......uhhh squirrel hunting gun now?... LOL
@michaelkeeshan1101
@michaelkeeshan1101 11 жыл бұрын
wen i put back my trigger pull my safty catch wont work wat will i do
@aligokceyilmaz1
@aligokceyilmaz1 7 жыл бұрын
Do you share product information on video?
@KayhoticGames
@KayhoticGames 8 жыл бұрын
Will this work in a lancer tactical m82?
@coolness488
@coolness488 6 жыл бұрын
Lol thats why im here too
@kwannax
@kwannax 5 жыл бұрын
Same here, looking for tutorial co2 instalation
@TheMegaboner1
@TheMegaboner1 5 жыл бұрын
No semi auto action?
@contrabasstrombone13
@contrabasstrombone13 8 жыл бұрын
How many shots do you get out of one 12 gram co2 cartridge?
@obamacarreviews1043
@obamacarreviews1043 7 жыл бұрын
10 shots at most in 100 celcis fuck russia ukraine better
@maxims.762
@maxims.762 7 жыл бұрын
polska the worst)))
@maxims.762
@maxims.762 7 жыл бұрын
Noo just with tongue is fine...like usual, thanks )))
@maxims.762
@maxims.762 7 жыл бұрын
hello, is it possible to shoot 500 fps with this CO2 kit? because that is the limit in my country. And what exacly are the benefits from this CO2 kit? Thanks
@c4_yrslf726
@c4_yrslf726 7 жыл бұрын
Canada?
@pinay56
@pinay56 8 жыл бұрын
Isn't th FPS between 193 to 204 a bit low for a sniper rifle?
@pinay56
@pinay56 8 жыл бұрын
+AirsoftProCZ Thank you; being an American and used to seeing "FPS", I'm not too familiar with the European style "M/S" rateing.
@nikolaikravchenko8334
@nikolaikravchenko8334 8 жыл бұрын
why not get an m150 spring? a spring isn't prone to losing power in the cold.
@811brian
@811brian 8 жыл бұрын
+Nikolai Kravchenko The 2nd gen already has the m150 spring factory installed. The CO2 conversion is meant to make it easier to load each round into the chamber while maintaining that high amount of fps we so desire.
@carls.6746
@carls.6746 8 жыл бұрын
about how many bbs can it shoot before needing a refill and is there a way to lock the fps at 500 because all of the fields within 3 hours of my house have a no exceptions 500fps max rule.
@ethanbass2441
@ethanbass2441 8 жыл бұрын
get the spring version and downgrade. My area has a 510 limit, and I downgraded my spring to do consistently 500.
@carls.6746
@carls.6746 8 жыл бұрын
what spring did u use
@ethanbass2441
@ethanbass2441 8 жыл бұрын
+Asura Idk. my buddy had like 5 dif kinds and I just chose the best one.
@ethanbass2441
@ethanbass2441 8 жыл бұрын
+Asura just Google it.
@GCS88
@GCS88 8 жыл бұрын
the short springs are probably the same as regular AEG springs if you can get a low powered AEG spring just cut it to fit and use it instead of the spring they provide... just got mine today will test it out
@kerimerzurum7613
@kerimerzurum7613 8 жыл бұрын
Hi, i have a co2 driven sniper rifle, it look like a vsr 10, but i dont know the manufacturer or the model (bought second hand). I want to make a conversation to only spring driven sniper. Do you have any solution plz pm me. I need help! Best regards
@kalashnkov4774
@kalashnkov4774 9 жыл бұрын
Will this work for any SVD or a certain brand?
@811brian
@811brian 8 жыл бұрын
212 m/s seems a _little_ hot for an airsoft gun. Unless were shooting from that far away.
@suomi6769
@suomi6769 6 жыл бұрын
BC Nation There is things called 0.40 gram bb's
@tomzviefelhofer8211
@tomzviefelhofer8211 7 жыл бұрын
to byla manualka a vi-y ste z toho udělali plyn na co2
@Trixxxik
@Trixxxik 11 жыл бұрын
to chci :D
@lukasvrbka25
@lukasvrbka25 9 жыл бұрын
Hodilo by se nainstalovat ještě nějakej jinej upgrade něž tam dám to
@tippman31
@tippman31 8 жыл бұрын
what's that in fps. and how many shots per c02 cartridge
@dawi4551
@dawi4551 8 жыл бұрын
+Isaac Jimenez if you see with atention you can watch that´s are m/s, not fps
@laputo6995
@laputo6995 8 жыл бұрын
+Isaac Jimenez About 65 shots
@mashrooms1590
@mashrooms1590 8 жыл бұрын
+Isaac Jimenez ca 650-700 fps
@notagt4103
@notagt4103 4 жыл бұрын
@@dawi4551 well 4.20 joulee is about 650-700 fps :l
@serpantinvespa4475
@serpantinvespa4475 8 жыл бұрын
молотком по цилиндру...:( я так понимаю там и кит такой же :)
@_Just_John
@_Just_John 11 жыл бұрын
Pokud to někdo při takové úsťovce nasype do člověka z dvaceti metrů, tak určitě. Kamarád říkává, že si lidi nemaj cpát do zbraně silnější pružinu, než je jejich IQ. A o tom to je. Čím větší úsťová rychlost, tím zodpovědnější musí člověk být.
@beguise21701
@beguise21701 10 жыл бұрын
it's possible to downgrade it to 450 fps ? AND HOW?
@majkl978
@majkl978 10 жыл бұрын
Only with airbrake :)
@majkl978
@majkl978 10 жыл бұрын
To the airnozzle...
@AdrianReef
@AdrianReef 6 жыл бұрын
That's so freaking dangerous. Should it fail and release all the gas at once,it could do some serious damage.
@readingmachinenegi
@readingmachinenegi 2 жыл бұрын
did you mean an extremely powerful single shot?
@nemyh1h2h3
@nemyh1h2h3 10 жыл бұрын
2 a půl zásobníku
@janpertl5268
@janpertl5268 10 жыл бұрын
co je to za song? :DDD
@-alfavucjak
@-alfavucjak 4 жыл бұрын
Baš niko
@alfadhirheitir2206
@alfadhirheitir2206 7 жыл бұрын
This one is no farting when shoot? ( cause older gens are farting xD)
@lukasvrbka25
@lukasvrbka25 9 жыл бұрын
*Hodilo by se nainstalovat ještě nějakej jinej upgrade něž tam dám tohle
@zenchannel2695
@zenchannel2695 3 жыл бұрын
สั่งซื้อได้ที่ไหนครับ
@chhau123
@chhau123 9 жыл бұрын
4J.. fuck me.. that's illegal in most countries
@redlinethin
@redlinethin 8 жыл бұрын
I dont see a point of this mod... takes ages to change CO2, 735 fps is illegal in Europe, loses fps very quickly -130fps in 18 shots, will be worse in cold weather plus you wouldn't want to change CO2 in cold and bad weather.
@tomt373
@tomt373 2 жыл бұрын
For me, to do this conversion and to not get a semi-auto is pointless. Now you are dependent on buying CO2 cylinders, and dumb question, how do you load a new one without taking the gun apart? This is typical of someone who is in love with their own gimmicky solution to a non-existent problem. I mean the presentation here is obviously done by a magician because I do not clearly see the insertion of any sort of regular CO2 cylinder, yet his gun magically shoots. That tells me there is no convenient externally available quick-change set-up in this extensive parts replacement, that obviously is best done by someone with the tools, dedicated workspace and experience.
@janfranek2960
@janfranek2960 11 жыл бұрын
Zbraň pěkná ale 200m/s a vejš je už trochu nehumální !!!!!
@kingarthur7051
@kingarthur7051 3 жыл бұрын
Bruh only 200fps? I have an a&k svd Dragunov with the upgraded spring and it's 500 fps
@airsoftvseverything
@airsoftvseverything Ай бұрын
Not FPS on the chrony, that's M/s. 234M/s = 735fps
SVD A&K
7:30
RR_Sancho
Рет қаралды 3,8 М.
Como desarmar/armar una SVD Dragunov A&K + Upgrades, Airsoft
10:17
FOOLED THE GUARD🤢
00:54
INO
Рет қаралды 62 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:19
CRAZY GREAPA
Рет қаралды 22 МЛН
How to remove Well MB06,13 series FPS air brake.
3:39
AirsoftPro.cz
Рет қаралды 29 М.
Szybki przestrzał repliki ASG SWD Cyma
1:58
Shamil Kamilski
Рет қаралды 13 М.
[UNBOXING] KOER Dragunov SVD Sniper unboxing - King Arms clone
11:09
Airsoft Top Tips!
12:06
Negative Airsoft
Рет қаралды 30 М.
M249 AirsoftPro CNC HopUp chamber
4:38
AirsoftPro.cz
Рет қаралды 23 М.
ASG Tri-Shot Spas -12 Airsoft Shotgun Review!
16:31
Max Cherepenin
Рет қаралды 28 М.
Dragunov | How to Disassemble
4:40
Arm&Armory
Рет қаралды 52 М.
AIRSOFT- SVD Dragunov King Arms, revue et tests.
16:58
Gorky teambratva
Рет қаралды 9 М.
My Top 5 WORST Airsoft Guns
32:48
Negative Airsoft
Рет қаралды 61 М.
PRO FOOTBALLER HEIGHT KICK CHALLENGE 😱
0:14
Joris
Рет қаралды 3,6 МЛН
Ronaldo preferred the team to himself. ❤️
0:43
hamid sahari
Рет қаралды 3,2 МЛН
CHALLENGE FOOT ⚽️🌹
1:01
Tonyczh
Рет қаралды 39 МЛН
When Players Ignore Fans 😢
0:40
Foot Mood
Рет қаралды 4,4 МЛН