Artillery X2 - 3 tips against Z wobbel

Artillery X2 - 3 tips against Z wobbel - quick and dirty

Рет қаралды 12,423

2 жыл бұрын

Artillery X2 - 3 tips against Z wobbel - quick and dirty
#X2 #artillery #tuning #3dprintpassion
Unfortunately, large printers often suffer from irregular layers along the Z axis - often called wobbling.
In this video, I show 3 tricks how I eliminated my wobbling on the X2.
✏️Thingiverse links:
Filament holder/redirection www.thingiverse.com/thing:516...
✏️ofther links
PTFE Tube* amzn.to/3DK8TEJ
▬▬▬▬
My favority printers*
Recommended from (entry level**) ✳️1 Beginner to ✳️6 Professional
☑️ Artillery Genius Pro - great entry-level printer with ABL und direct Extruder ✳️1
🛒 Artillery Genius Pro 🇪🇺 www.geekbuying.com/go/67mPgeVN
🛒 Artillery Genius Pro 🇩🇪 amzn.to/3kkWW1g
☑️ Creatlity Ender 3 S1 - sehr guter Drucker für Einsteiger mit ABL und direkt Extruder ✳️1
🛒 🇪🇺 www.geekbuying.com/go/6QGIV7kC
🛒 🇩🇪 amzn.to/36dGDiB
☑️ Anycubic Kobra - great entry-level printer with ABL and direct extruder ✳️1
🛒 🇪🇺 www.geekbuying.com/go/6XU21FEE
🛒 🇩🇪 amzn.to/3k4rBiW
☑️ Mingda Magician X - 3D printer fully equipped with technical features ✳️1.5
🛒 🇩🇪 amzn.to/3MBjC9y
🛒 🇪🇺 www.geekbuying.com/go/6YX0H5B4
☑️ Anycubic Viper - middle size Entry-level printer with pressure sensor leveling ✳️1.5-2
🛒 Anycubic Viper 🇪🇺 www.geekbuying.com/go/67mr0x2x
🛒 Anycubic Viper 🇩🇪 amzn.to/3I0DHUW
☑️ Dual Extruder ✳️2
🛒 Sovol SV02 Dual Extruder 🇩🇪 amzn.to/3wHJc4K
🛒 Sovol SV02 Dual Extruder 🇨🇳 s.click.aliexpress.com/e/_AFWghO
☑️ very big 3D printer with direct Extruderr ✳️2
🛒 Sovol SV03 🇩🇪 amzn.to/3d4lYPF
🛒 Sovol SV03 🇨🇳 s.click.aliexpress.com/e/_AlYZEM
☑️ big 3D Drucker with direct Extruder ✳️2
🛒 Artillery Sidewinder X2 🇪🇺 www.geekbuying.com/go/67mTl6D6
🛒 Artillery Sidewinder X2 🇩🇪 amzn.to/3H73qLe
☑️ Core XY ✳️3
🛒 Ender 5 🇪🇺 www.geekbuying.com/go/67mTs1UX
🛒 Ender 5 🇩🇪 amzn.to/2OzIaHj
🛒 Ender 5 🇨🇳 s.click.aliexpress.com/e/_987I1Q
☑️ Idex printer with dual printing system (2 extruders, 2 print heads) ✳️4-5
🛒 Weedo X40 🇩🇪 amzn.to/3BWR6J
** By the (subjective) barrier to entry, I mean how easy it is to assemble the printer and get
and get the first decent results.
▬▬▬
You like to support this youtube channel?
☕ Buy me a coffee ;-) paypal.me/ThorstenDanner ☕
**❤️Thanks to all, which supported the channel already❤️**
▬▬▬▬
If you copy anything in this video, you do so at your own risk - no liability.
+++Advertising+++
The video as well as the description contain unpaid advertising.
*For product links, I use affiliate links and receive when buying through such a link a small commission that comes to the channel to good.
You pay when buying through such a link, no increased price.
I was not paid by a company.

Пікірлер: 21

@jasontrauer Жыл бұрын

Why does this channel not get more views? Excellent production quality and very informative. Also, hearing this accent is like enjoying a rich chocolate cake in front of a fireplace with a large dog at your feet.

@3dprintpassion Жыл бұрын

Thank you

@1empyre1life Жыл бұрын

This sounds like a nice set of things to try on my X1. Thanks for putting this together!

@3dprintpassion Жыл бұрын

thank you for your feedback :-)

@TheZombieSaints Жыл бұрын

That's great advise... Found a print that makes little brackets the go over the steppers and connect to the z rails, that's helpes heaps but that z screw alignment is genius... Thanks again 👍

@thirty2206 Жыл бұрын

Great advise. I just got my x2 a few days ago and I look forward to trying these tips

@flatlyna2223 2 жыл бұрын

Good advice as always, danke.

@torquebiker9959 10 ай бұрын

Thanks thanks thanks for your research and sharing!

@3DKMaker 2 жыл бұрын

Hello great your video thank you I shared it on a French 3D printing forum.

@3dprintpassion 2 жыл бұрын

merci beaucoup - bon weekend.

@ozyakir Жыл бұрын

Thanks for the great video :) Just to be sure - I don't need the measuring clock (though it would be NTH for comparison) just to loosen the motor, home the hotend and tighten it again?

@DieAllNetFlat 2 ай бұрын

My Z-Axis is stuttering and I cant find out why -> When I unplug the cables I can turn the Z-Axis smoothly, but as soo as I plug the cables in its hard to move them also you can hear a stuttering sound when trying to move the Z-Axis over the menu. Can anybody help me with that solution?

@DavidGomez-sx9gi 3 ай бұрын

I only got ony doubt, shouldn't the filament spool act as a stabilizing moment? I mean, it is a weight on top, is like if you try to move a stick with something very heavy on top, you will have to make more force than with the stick alone.

@Bezem1944 3 ай бұрын

No, the lower point of mass the better stabilization. Take a stick with something heavy at the end and try to keep it vertically straight, then ask someone to bump it near top. It's not gonna be easy to keep it straight.

@martinstreif2879 Жыл бұрын

I've got the Genius Pro since half a year and I've got only problems with it. I purcased a dial gauge like yours, but how did you attach it? - What is that clamp, or can I use anything? I want check what's wrong as even my Genius Pro, which is clearly smaller, has sever z-wobbling and layer shifts. I printed a new fan duct, lubricated everythign, installed a new metal idler and rubber-spacers for the bed - but still not happy with the result. I hope that checking the rod will get me results. Also: Do you know what the screws do that were listed as "only tighten if needed" in the manual? I disambled the entire printer-gantry but i am unsure on how to properly align everything again - the rollers don't seem to roll equally tight and i am not sure if the motors are properly aligned. I am tired of getting f'ed up prints as i invested a lot of time (and money) already. If you got any suggestions or know a video on how to assemble it properly, I'd be glad :)

@gladiatormechs5574 Жыл бұрын

can you help solve layer shifting with these machines.. would what you explained correct layer shifting or do you have other suggestions for solving that problem

@albertogambini534 7 ай бұрын

did you try tensioning the belts?

@larsbliss2728 Жыл бұрын

I just ordered one as my first printer. Hope all goes well.

@Bearvin Жыл бұрын

fix your poor sound man

@darthjump Жыл бұрын

Don´t be rude let´s see your channel.

@isabido Жыл бұрын

Thanks for your help, I own an X2 and I'm printing with a PLA+ I'm getting very bad results in my opinion. Could this be caused by a problem in the Z axis? I attached a couple of sample images. drive.google.com/file/d/1TvLcA0pf2oK8q6MmBet-z9HPkWS8IVd8/view?usp=sharing, drive.google.com/file/d/1wiAAcmEWOq_8eAvlTLdAOp8R75e0ZqtQ/view?usp=sharing